5/16 hose assembly 10 ft pairs air and fluid hose specifications that support spray equipment setups where stable pressure and temperature resistance matter. The air hose has a -20 to +190 degrees F temperature range, so it handles typical shop or site environments without softening in heat or stiffening in moderate cold. The fluid hose temperature range of 0 to 190 degrees F keeps coatings moving consistently through the line in standard finishing conditions where material flow stability is important. Textile reinforcement in the air hose adds strength against expansion under load, which helps keep working pressure predictable during spraying. Braided high strength synthetic yarn in the fluid hose supports higher material pressures, so the line holds its rating without ballooning. Smooth synthetic rubber casings on both hoses allow easier routing along equipment or walls where sliding across surfaces is routine.
The air hose working from -20 to +190 degrees F supports runs through cooler or warmer areas around spray equipment, so installers can route it along walls or ceilings without temperature-driven soft spots. The fluid hose 0 to 190 degrees F temperature range keeps coating lines stable near equipment where materials are conditioned, so the hose supports steady flow during extended spray cycles. Nylon 11 (silicone-free) tube in the fluid hose provides a smooth internal path for coatings, which helps maintain consistent delivery through the gun. The synthetic rubber casings on both hoses create an outer surface that tolerates handling and contact with typical shop materials, so the hose bundle can be routed through existing hose tracks or supports. Individually packed product handling keeps each hose assembly protected until installation, which helps preserve hose surfaces before routing and connection.
This air hose assembly is specified as a 5/16 hose assembly, 10 ft long, so it serves shorter spray gun runs where compact layouts reduce hose drag. As an air hose assembly in the spray equipment category, it is suited to supplying compressed air within its 200 psi working pressure range, which supports spray gun function in typical finishing systems. The red synthetic rubber casing on the air hose gives a visible line that is easier to trace along racks or floors, which helps installers distinguish air from other lines during setup. The fluid hose described with a smooth black synthetic rubber casing provides a clear visual contrast, which simplifies separating air and fluid lines when arranging a spray station. The combination of air and fluid hose specifications under one description gives installers a defined pairing of pressure and temperature capabilities, so hose selection aligns with expected system requirements.
The 200 psi air hose working pressure and textile reinforcement work together to limit expansion under load, which helps maintain stable inlet pressure at the spray gun for predictable patterns. The fluid hose 750 psi working pressure combined with braided high strength synthetic yarn supports higher material pressures, which benefits systems pushing coatings through longer hose runs or smaller orifices. Oil resistant synthetic rubber casings on both hoses allow routing near lubricated compressors or machinery, because incidental oil contact is less likely to affect outer hose integrity during service. The air hose -20 to +190 degrees F temperature range, paired with the fluid hose 0 to 190 degrees F range, covers typical building and finishing room temperatures, which supports year-round use in controlled indoor environments. Nylon 11 (silicone-free) tubing in the fluid hose offers a chemically stable interior surface for coatings, which helps reduce interaction between material and hose wall, supporting consistent application behavior.
The air hose supports a 200 psi working pressure, which allows it to carry compressed air for spray equipment while keeping hose expansion under control during normal spraying.
The fluid hose supports a 750 psi working pressure, which suits higher pressure material lines where coatings are pushed longer distances or through finer spray tips.
The air hose operates from -20 to +190 degrees F, so it performs in cooler or warmer shop areas without significant changes in flexibility within that range.
The fluid hose supports 0 to 190 degrees F, matching typical coating and room temperatures so material flow remains consistent through the hose during spraying.
The fluid hose tube uses Nylon 11 that is silicone-free, providing a smooth internal surface that moves coatings efficiently and maintains material flow characteristics.
The oil resistant synthetic rubber casings allow the hoses to sit near lubricated machinery or compressors while maintaining exterior integrity when exposed to oil.
This C.A. Technologies 5/16 hose assembly, 10 ft long, combines defined air and fluid hose temperature and pressure ranges that match typical spray environments, so it fits systems operating within 200 psi air and 750 psi fluid limits. Textile reinforcement and braided synthetic yarn strengthen the hose walls, which supports dependable performance where routing around equipment is required. Oil resistant, smooth synthetic rubber casings withstand contact with common shop oils while moving easily along supports, simplifying line management around spray stations. Choosing this hose assembly aligns hose capability with working pressures and temperatures, supporting consistent performance in finishing workflows.