
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Rochdale Series satin nickel pull is a zinc die-cast cabinet handle designed for projects that call for a 6-5/16 in (160 mm) center-to-center layout, helping match existing drill patterns on doors and drawers. The Rochdale Collection description explains that it is defined by a fusion of architectural details and runway flair, so it delivers a decorative look while functioning as everyday working hardware. Rivets and masculine design aesthetics give it an industrial look, which supports design schemes that lean toward industrial or loft-style cabinetry without sacrificing usability. The satin nickel finish is stated as the finish, so it presents a muted, low-sheen metallic appearance that works well in many cabinet and furniture settings where bright chrome would be too reflective.
The center-to-center value of 6-5/16 in (160 mm) is clearly stated, which lets installers drill or reuse two mounting points with confidence that the pull will align as planned. Because the projection is specified at 1-1/4 in, the working clearance between the hand and door face can be anticipated ahead of time, which helps when this pull is placed near appliance panels or adjacent cabinets. The 7-1/4 in overall length is documented, so layout along rail and stile edges can be planned to keep the pull centered or offset as desired while still clearing neighboring edges. The 1-1/8 in width is given, which helps determine how the pull will look on narrow versus wide rails in a run of doors.
The product is categorized as Decorative Hardware & Moldings in Handles and Pulls, so it is oriented toward cabinet and furniture door and drawer use rather than structural fasteners. The 6-5/16 in (160 mm) center-to-center pattern suits installations on medium to large doors and drawers where a wider grip point is preferred, which can be important on kitchen base cabinets or pantry fronts that see frequent use. With an overall length of 7-1/4 in, the pull spans more of the rail, giving a substantial visual line that works well across multiple fronts in a run. The satin nickel finish is specified, so it naturally coordinates with other satin nickel decorative hardware, hinges, or fixtures in the same space, helping maintain a consistent hardware story across a project. Because the Rochdale Collection is described as having rivets and masculine, industrial aesthetics, this pull fits designs that call for visible hardware details rather than minimal, concealed lines.
The defined 6-5/16 in (160 mm) center-to-center spacing allows jigs or templates to be set once and repeated across a bank of doors, reducing layout variation from piece to piece. Knowing the 1-1/4 in projection ahead of time gives a predictable grip depth, which matters when installing on thicker drawer fronts where users benefit from a pull that stands off enough for a full hand. The 1-1/8 in width figure helps plan placement relative to door edges, glass lites, or applied moldings so the pull does not crowd delicate details. The zinc die-cast construction is specified, so the form is produced from a mold, which supports consistent dimensions from pull to pull across larger orders. The manufacturer part number BP53714G10 is given, which helps match this exact model, finish, and size when expanding an existing installation or replacing damaged pieces during service work.
The Amerock Rochdale Series satin nickel pull uses a 6-5/16 in (160 mm) center-to-center drilling pattern, which matches installations laid out for that specific hole spacing.
The BP53714G10 Rochdale cabinet pull is documented at 7-1/4 in overall length, so it spans more of the door or drawer front for a substantial appearance.
This satin nickel cabinet pull has a specified projection of 1-1/4 in, creating a consistent stand-off from the cabinet face for hand clearance.
The Rochdale cabinet pull width is listed as 1-1/8 in, offering a stable gripping surface across the bar on doors and drawers.
The Amerock Rochdale Series satin nickel pull is made from zinc die-cast material, supporting crisp architectural details and consistent dimensions.
The 6-5/16 in center-to-center size describes the distance between mounting holes, guiding drilling and replacement when matching existing cabinet layouts.
The Amerock Rochdale Series satin nickel pull with a 6-5/16 in (160 mm) center-to-center pattern, 7-1/4 in overall length, and 1-1/4 in projection offers a clearly defined size for cabinet work. The zinc die-cast construction, industrial rivet styling, and satin nickel finish align with projects calling for decorative yet functional pulls. For cabinets or furniture laid out around the 160 mm center-to-center standard, this BP53714G10 model from the Rochdale Collection provides a consistent, repeatable option that matches both dimensional and aesthetic requirements.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AMBP53715-GPH Mfr# BP53715GPH | Amerock Rochdale 3" (76 mm) Center to Center Graphite Cup Pull, BP53715GPH | ||||
Sold in: 1 Each | AMBP53716-GPH Mfr# BP53716GPH | Amerock Rochdale 3-3/4" (95 mm) Center to Center Graphite Cup Pull, BP53716GPH | ||||
Sold in: 1 Each | AMBP53715-G10 Mfr# BP53715G10 | Amerock Rochdale 3" (76 mm) Center to Center Satin Nickel Cup Pull, BP53715G10 | ||||
Sold in: 1 Each | AMBP53711-GPH Mfr# BP53711GPH | Amerock Rochdale 3" (76 mm) Center to Center Graphite Pull, BP53711GPH | ||||
Sold in: 1 Each | AMBP53712-GPH Mfr# BP53712GPH | Amerock Rochdale 3-3/4" (95 mm) Center to Center Graphite Pull, BP53712GPH | ||||
Sold in: 1 Each | AMBP53711-G10 Mfr# BP53711G10 | Amerock Rochdale 3" (76 mm) Center to Center Satin Nickel Pull, BP53711G10 | ||||
Sold in: 1 Each | AMBP53713-G10 Mfr# BP53713G10 | Amerock Rochdale 5-1/16" (128 mm) Center to Center Satin Nickel Pull, BP53713G10 |