
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Rochdale pull 96mm center to center gives cabinets a defined industrial style, because the Rochdale Collection is described as a fusion of architectural details and runaway flair that defines utilitarian elegance. That design language helps casework read more intentional on finished installations. Rivets and masculine design aesthetics give this pull an industrial look, which supports loft, modern, or transitional projects that need visible hardware as part of the overall design rather than a background detail. The pull is part of the Rochdale Collection, so multiple locations on a job can share the same visual family for consistent styling. The center-to-center dimension of 3-3/4 in (95 mm) sets a clear drilling pattern that works well across standard cabinet doors and drawers.
The center-to-center measurement of 3-3/4 in (95 mm) defines the hole spacing for this pull, which allows straightforward installation on fronts pre-bored to that common size and reduces layout time on new work. The specified screw size of 8-32 x 1 in sets the thread and length standard for mounting, which gives installers a known interface when fastening through typical cabinet door and drawer front thicknesses. The overall 4-3/4 in length positions the grip area beyond the boring pattern, which helps when aligning multiple pulls along a wide bank of drawers while maintaining consistent visual margins at the ends.
The Rochdale Collection design, described as utilitarian elegance, supports use in kitchens, baths, and built-ins where hardware is intended to be a visible design element. Rivets and masculine design aesthetics give it an industrial look, which fits cabinets in loft-style spaces, workshop-inspired rooms, or commercial break areas that benefit from a more rugged visual tone. The Graphite finish provides a dark color that contrasts well with lighter cabinet finishes, so the 1-1/8 in width can stand out clearly on painted or laminated fronts. The 3-3/4 in (95 mm) center-to-center sizing matches a widely used pull spacing, which helps on projects that mix new cabinetry with existing fronts bored to that dimension.
The zinc die-cast material allows Amerock to execute the Rochdale series details with accuracy, which keeps the rivet highlights and architectural lines consistent from pull to pull on a multi-cabinet run. A projection of 1-1/4 in establishes predictable hand clearance, which supports repeatable ergonomics across doors and drawers at different heights. The 4-3/4 in overall length sets a known footprint on the face, which helps designers plan sightlines so the pulls line up cleanly with stiles, rails, and adjacent appliances. The stated screw size of 8-32 x 1 in defines a standard fastener interface, which supports consistent torque feel during installation and helps match common cabinet substrate thicknesses without overextending behind the panel.
The Amerock Rochdale BP53712GPH pull has a 3-3/4 in (95 mm) center-to-center dimension, which sets the drilling pattern and matches common cabinet boring for straightforward mounting.
The pull has an overall length of 4-3/4 in, which provides grip area beyond the mounting holes and helps the hardware visually fill standard drawer fronts.
The Rochdale BP53712GPH pull is made from zinc die-cast material, which supports crisp detailing around the rivets and architectural lines on each piece.
This Amerock Rochdale graphite cabinet pull has a projection of 1-1/4 in, which provides hand clearance off the cabinet face during regular use.
The pull has a width of 1-1/8 in, which gives a substantial face to show the industrial design and Graphite finish on cabinet doors and drawers.
The Amerock BP53712GPH Rochdale pull specifies 8-32 x 1 in screws, which defines the thread and typical length used for mounting through standard cabinet fronts.
The Amerock Rochdale series 3-3/4 in (95 mm) center-to-center Graphite pull BP53712GPH combines zinc die-cast construction, 4-3/4 in overall length, and 1-1/4 in projection to deliver defined industrial styling with practical grip clearance. The 3-3/4 in (95 mm) drilling pattern, 1-1/8 in width, and Graphite finish work together for consistent results on cabinet runs that call for visible, architectural hardware. For projects matching this size and style, this pull supports a coordinated Rochdale Collection look across doors and drawers.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AMBP53715-GPH Mfr# BP53715GPH | Amerock Rochdale 3" (76 mm) Center to Center Graphite Cup Pull, BP53715GPH | ||||
Sold in: 1 Each | AMBP53716-GPH Mfr# BP53716GPH | Amerock Rochdale 3-3/4" (95 mm) Center to Center Graphite Cup Pull, BP53716GPH | ||||
Sold in: 1 Each | AMBP53715-G10 Mfr# BP53715G10 | Amerock Rochdale 3" (76 mm) Center to Center Satin Nickel Cup Pull, BP53715G10 | ||||
Sold in: 1 Each | AMBP53711-GPH Mfr# BP53711GPH | Amerock Rochdale 3" (76 mm) Center to Center Graphite Pull, BP53711GPH | ||||
Sold in: 1 Each | AMBP53711-G10 Mfr# BP53711G10 | Amerock Rochdale 3" (76 mm) Center to Center Satin Nickel Pull, BP53711G10 | ||||
Sold in: 1 Each | AMBP53713-G10 Mfr# BP53713G10 | Amerock Rochdale 5-1/16" (128 mm) Center to Center Satin Nickel Pull, BP53713G10 | ||||
Sold in: 1 Each | AMBP53714-G10 Mfr# BP53714G10 | Amerock Rochdale 6-5/16" (160 mm) Center to Center Satin Nickel Pull, BP53714G10 |