Amerock Rochdale Graphite Pull For Cabinets

Amerock Rochdale graphite pull brings the Rochdale Collection design into a 5-1/16 in (128 mm) center-to-center cabinet handle, so drawers and doors share a consistent, industrial-inspired look across the run. The pull uses zinc die-cast construction, which provides a solid metal feel during everyday opening and closing. Its graphite finish delivers a dark, modern appearance that ties into contemporary casework and fixtures. With an overall length of 6 in, the pull visually matches standard cabinet proportions on doors and wider drawers. A 1-1/4 in projection keeps fingers clear of the cabinet face during use while staying tight to the front for a clean line. The 1-1/8 in width gives enough grip surface without crowding adjacent hardware on narrow faces.

Rochdale Pull Details That Support Daily Use

• The 5-1/16 in (128 mm) center-to-center dimension sets precise hole spacing, which streamlines layout when drilling new fronts or aligning with existing 128 mm bores.
• The 6 in overall length stretches slightly past the mounting holes, giving extra visual presence that balances medium and large cabinet faces during installation.
• The 1-1/4 in projection keeps knuckles away from the door or drawer front, helping reduce finish contact in high-use areas over time.
• The 1-1/8 in width provides a stable gripping surface, which aids users with larger hands and supports a firm pull on heavier drawers.
• The zinc die-cast material yields a metal handle body that feels substantial in the hand, supporting repeat pulls in busy residential or light commercial settings.
• The graphite finish coordinates with darker hinges and fixtures, helping installers tie the pull into a unified decorative hardware scheme on the job.

Dimensions And Fit For Cabinet Mounting

The Rochdale Collection pull is defined by its 5-1/16 in (128 mm) center-to-center size, which matches common pre-bored cabinet and drawer fronts in metric-based layouts. Its 6 in overall length gives installers a clear edge-to-edge reference for positioning on rails or drawer fronts. The 1-1/4 in projection sets the standoff from the cabinet face, which matters when doors open near adjacent walls or appliances. At 1-1/8 in width, the pull fits comfortably on standard face-frame and frameless fronts without crowding neighboring hardware locations. The handle uses 8-32 x 1 in screws as its mounting interface, so it aligns to standard cabinet thickness ranges where that screw length is typically applied.

Using The Rochdale Pull In Cabinet Projects

Where This Rochdale Collection Pull Performs Best

This Amerock Rochdale series pull, identified by part number BP53713GPH, is suited for cabinet and drawer fronts that specify a 5-1/16 in (128 mm) center-to-center layout. The graphite finish supports installations where a darker, architectural look is desired, tying into casework, appliances, or fixtures with similar tones. Its industrial-inspired styling, referenced in the Rochdale Collection description, aligns with projects calling for visible detail and structured lines on the hardware. With a 6 in length and 1-1/8 in width, the pull works well on kitchen, bath, or shop cabinets sized for standard bar-style handles, maintaining proportion on full-overlay and partial-overlay fronts. The zinc die-cast construction supports repeated operation in frequently used locations such as base cabinet drawers and wall cabinet doors.

Details That Help Achieve Consistent Cabinet Results

The defined 5-1/16 in (128 mm) center-to-center spacing allows the Amerock Rochdale graphite pull to drop into pre-drilled 128 mm patterns, reducing layout variance across a full kitchen or bank of casework. The 1-1/4 in projection keeps the gripping point away from the cabinet surface, which helps limit contact marks in heavy-use zones and maintains clearance for fingers on thicker door edges. A 1-1/8 in width offers a comfortable grip while leaving room to maintain consistent reveals between multiple pulls on the same face. Using 8-32 x 1 in screws as the attachment method ties the pull directly into common cabinet hardware threading, simplifying hardware selection to match typical door and drawer thicknesses. With material, finish, and dimensions all defined, the Rochdale pull supports repeatable alignment and appearance from one cabinet run to the next.

Common Questions About This Amerock Rochdale Pull

Selecting This Pull For Your Next Cabinet Run

The Amerock Rochdale graphite pull BP53713GPH combines 5-1/16 in (128 mm) center-to-center spacing, a 6 in overall length, and zinc die-cast construction to support everyday cabinet and drawer use. Its graphite finish and Rochdale Collection styling give installers a defined, industrial-inspired option when coordinating decorative hardware. For projects laid out on the 128 mm pattern that call for a dark, architectural pull profile, this Rochdale handle aligns dimensions, mounting interface, and appearance into a straightforward cabinet hardware choice.