
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rochdale cup pull 96mm graphite describes an Amerock Rochdale Series 3-3/4 in (95 mm) center to center cup pull designed for cabinet and furniture drawers or doors. The cup pull format gives a comfortable handgrip, which matters when opening heavier drawers repeatedly on the job. Its 3-3/4 in (95 mm) center-to-center mounting matches common drilling patterns, helping installers reuse existing holes when the layout already fits this spread. The graphite finish provides a dark, muted look, which supports industrial and contemporary design schemes in kitchens, baths, and casework. The Rochdale Collection style blends architectural details with rivet-inspired, masculine aesthetics, creating utilitarian elegance that works well in visible residential or light commercial applications. This pull is classified under decorative hardware handles and pulls, so it fits directly into standard cabinet hardware layouts without special fittings or unusual prep work.
The Rochdale cup pull uses a 3-3/4 in (95 mm) center-to-center pattern, so the mounting points align in a straight line at that spacing, which is standard for many cabinet layouts. The projection of 3/4 in keeps the pull close to the door or drawer face, which matters when doors open past adjacent appliances or walls where clearance is limited. With a width of 7/8 in, the pull occupies a modest vertical band, letting installers place it neatly on narrower rails without crowding panel details. At 5-3/8 in overall length, it spans a noticeable portion of the drawer front, anchoring the hardware visually across the face. The specified screw size of 8-32 x 1 in defines the threaded interface, aligning with common cabinet drilling and fastening practices in shop and field work.
The Amerock Rochdale Series cup pull, identified by manufacturer part BP53716GPH, is intended for decorative hardware applications on cabinets and furniture pieces. Its 3-3/4 in (95 mm) center-to-center dimension matches a widely used standard, which helps when matching existing hardware spacing on kitchen, bath, or built-in cabinetry. The 5-3/8 in overall length gives this pull enough visual presence for base cabinets and wider drawers, supporting a balanced look across a bank of units. Because the projection is 3/4 in, the pull suits cabinets near walkways where low-profile hardware reduces catch points on clothing or bags. The graphite finish works with industrial and contemporary design schemes, helping tie into darker hinges, fixtures, or appliances for a coordinated appearance.
The zinc die-cast construction of this Rochdale cabinet cup pull creates a stable, repeatable shape, which helps installers achieve consistent alignment when hardware is laid out across multiple doors and drawers. The 7/8 in width defines a predictable footprint on the rail, which simplifies measuring edge distances and maintaining straight visual lines along a cabinet run. Using the specified 8-32 x 1 in screw size gives a known thread standard, which matters in shop workflows where drilling and tapping patterns follow typical cabinet hardware dimensions. The defined 3-3/4 in (95 mm) center-to-center spacing allows jigs and templates to be set once and reused, improving speed and keeping hardware placement uniform from piece to piece. The graphite finish across each pull supports matching color and sheen along an installation, which helps reduce visual variation across large projects.
The Amerock BP53716GPH cup pull has a 3-3/4 in (95 mm) center-to-center dimension, so drill holes or existing mounting points need that spacing for proper alignment.
The Rochdale cabinet cup pull measures 5-3/8 in in overall length, giving enough span for a comfortable grip and a balanced look on most cabinet drawer fronts.
This Amerock cup pull has a 3/4 in projection, keeping it relatively low profile while still leaving finger room to grab and operate drawers or doors.
The Rochdale cup pull is made from zinc die-cast material, giving it a solid metal feel suited to regular cabinet and furniture use.
The BP53716GPH cabinet pull uses a graphite finish, providing a dark, industrial look that coordinates with modern cabinet and fixture palettes.
This Amerock cup pull is specified for 8-32 x 1 in screws, aligning with common cabinet hardware drilling and fastening practices.
The Rochdale cup pull 96mm graphite design brings Amerock decorative hardware styling with a 3-3/4 in (95 mm) center-to-center layout, which suits many cabinet and furniture installations. Its zinc die-cast construction, 5-3/8 in length, and 3/4 in projection help it perform well on everyday drawers and doors. The graphite finish aligns with industrial and contemporary design plans where darker hardware is preferred. For cabinet runs or furniture builds that call for a standard 3-3/4 in pull with a cup profile and graphite tone, this BP53716GPH model provides the defined dimensions and material you need.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AMBP53715-GPH Mfr# BP53715GPH | Amerock Rochdale 3" (76 mm) Center to Center Graphite Cup Pull, BP53715GPH | ||||
Sold in: 1 Each | AMBP53715-G10 Mfr# BP53715G10 | Amerock Rochdale 3" (76 mm) Center to Center Satin Nickel Cup Pull, BP53715G10 | ||||
Sold in: 1 Each | AMBP53711-GPH Mfr# BP53711GPH | Amerock Rochdale 3" (76 mm) Center to Center Graphite Pull, BP53711GPH | ||||
Sold in: 1 Each | AMBP53712-GPH Mfr# BP53712GPH | Amerock Rochdale 3-3/4" (95 mm) Center to Center Graphite Pull, BP53712GPH | ||||
Sold in: 1 Each | AMBP53711-G10 Mfr# BP53711G10 | Amerock Rochdale 3" (76 mm) Center to Center Satin Nickel Pull, BP53711G10 | ||||
Sold in: 1 Each | AMBP53713-G10 Mfr# BP53713G10 | Amerock Rochdale 5-1/16" (128 mm) Center to Center Satin Nickel Pull, BP53713G10 | ||||
Sold in: 1 Each | AMBP53714-G10 Mfr# BP53714G10 | Amerock Rochdale 6-5/16" (160 mm) Center to Center Satin Nickel Pull, BP53714G10 |