
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Rochdale cup pull brings the Rochdale Collection design into a 3 inch center to center handle, giving cabinet doors and drawers a defined industrial look. Rivets and masculine design aesthetics shape its appearance, so the pull reads as architectural hardware rather than plain trim. The satin nickel finish sets a muted, consistent tone across the face of the pull, helping it sit cleanly against painted or stained wood. Zinc die-cast construction forms the body of the pull, creating a solid-feeling part that stays dimensionally consistent across multiple units on the same job. The 3 inch, or 76 mm, center to center dimension sets the hole spacing, so it lines up with drilling patterns laid out for this common size. The Amerock BP53715G10 part number ties this exact Rochdale model to ordering and reordering needs on future work.
The 3 inch center to center dimension on this Amerock Rochdale cup pull sets the distance between mounting points, so installers can drill or bore using a familiar, widely used size. The pull is described with a 17/32 inch length, defining one key body dimension that affects how it meets the cabinet surface. A listed projection dimension shows how far the pull stands off the face, which influences finger clearance during daily use. The center to center measurement in both inches and 76 mm supports work from imperial or metric shop drawings. Because the product is categorized as a handle and pull, it is suited to acting as the primary gripping point on cabinet doors or drawer fronts where this mounting pattern is planned.
The Amerock Rochdale cup pull, identified by manufacturer part BP53715G10, sits within the Handles and Pulls category, positioning it for use on cabinet doors and drawer fronts that call for this handle style. Its 3 inch (76 mm) center to center measurement ties directly into layouts that already specify this spacing, which is common on face-frame and frameless cabinetry with standard drill patterns. Within the broader Decorative Hardware & Moldings classification, the pull carries both a functional and visual role, gripping the front while contributing to the finished look. The Rochdale Collection description highlights architectural details and an industrial character from rivets and masculine design elements, so it aligns well with cabinetry aimed at utilitarian, workshop-inspired, or loft-style interiors. Satin nickel finish supports these settings by delivering a controlled metal tone that pairs with many hinge and knob finishes from the same general color family.
The zinc die-cast material of the Amerock Rochdale cup pull allows the profile, rivet features, and edges to repeat accurately from unit to unit, supporting consistent alignment on long cabinet runs. A 3 inch center to center pattern keeps drilling straightforward when repeating the same dimension across several banks of doors and drawers. The satin nickel finish gives each pull the same surface color and sheen, which matters when aligning multiple pieces along a large kitchen or office installation. Industrial styling from rivets and structured lines creates a defined visual language, so designers can repeat the same pull to carry that theme around a room. The Amerock brand and precise BP53715G10 part number make it simple to match pulls on additions or remodel phases, helping later work look continuous with earlier installations.
The Amerock Rochdale cup pull uses a 3 inch (76 mm) center to center spread, which sets the drilling distance between mounting points on cabinet doors or drawers.
The Amerock Rochdale cup pull is made from zinc die-cast material, providing a molded construction that repeats its shape consistently across multiple pulls in a project.
The satin nickel finish gives the pull a uniform, low-gloss metal appearance, helping it blend with many cabinet colors and coordinate with other satin nickel hardware.
The BP53715G10 part number identifies this specific Amerock Rochdale 3 inch center to center satin nickel cup pull, tying product selection and reorders to the same model.
The Rochdale Collection styling uses rivets and masculine, industrial aesthetics, giving cabinets a more architectural, utilitarian appearance when this pull is specified.
This Rochdale cup pull is categorized under Decorative Hardware & Moldings and Handles and Pulls, positioning it as both a functional grip and a visible design element on cabinetry.
The Amerock Rochdale cup pull with 3 inch (76 mm) center to center spacing, satin nickel finish, and zinc die-cast construction offers a defined industrial style backed by a specific BP53715G10 identifier. These details help plan consistent cabinet layouts, match design themes, and align reorders across ongoing work. For projects that need an architectural, riveted look in a familiar mounting size, this Rochdale cup pull provides a clearly defined option you can specify by exact part number.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AMBP53715-GPH Mfr# BP53715GPH | Amerock Rochdale 3" (76 mm) Center to Center Graphite Cup Pull, BP53715GPH | ||||
Sold in: 1 Each | AMBP53716-GPH Mfr# BP53716GPH | Amerock Rochdale 3-3/4" (95 mm) Center to Center Graphite Cup Pull, BP53716GPH | ||||
Sold in: 1 Each | AMBP53711-GPH Mfr# BP53711GPH | Amerock Rochdale 3" (76 mm) Center to Center Graphite Pull, BP53711GPH | ||||
Sold in: 1 Each | AMBP53712-GPH Mfr# BP53712GPH | Amerock Rochdale 3-3/4" (95 mm) Center to Center Graphite Pull, BP53712GPH | ||||
Sold in: 1 Each | AMBP53711-G10 Mfr# BP53711G10 | Amerock Rochdale 3" (76 mm) Center to Center Satin Nickel Pull, BP53711G10 | ||||
Sold in: 1 Each | AMBP53713-G10 Mfr# BP53713G10 | Amerock Rochdale 5-1/16" (128 mm) Center to Center Satin Nickel Pull, BP53713G10 | ||||
Sold in: 1 Each | AMBP53714-G10 Mfr# BP53714G10 | Amerock Rochdale 6-5/16" (160 mm) Center to Center Satin Nickel Pull, BP53714G10 |