Amerock Conrad Pull For Cabinet Projects

Amerock Conrad pull gives a straightforward way to add a finished grip point to cabinet doors and drawers using a proven decorative handle design. The zinc die-cast material forms a solid pull body, which supports dependable handling when opening and closing cabinets in regular use. The oil-rubbed bronze finish provides a dark, traditional appearance, which helps cabinets read consistently in jobs calling for a warm, classic metal tone. The 3-3/4 in (95 mm) center-to-center drilling dimension sets the mounting hole spacing, so layouts can follow a common size used on many residential and shop cabinets. The 5-3/16 in overall length defines the total handle span, which affects visual proportion on face frames and drawer fronts. A 1 in projection sets how far the pull stands off the front, giving practical finger clearance while keeping the handle close to the surface. The 7/16 in width shapes a slimmer profile that works well on narrow rails.

Key Conrad Oil Rubbed Bronze Pull Details

• The 3-3/4 in (95 mm) center-to-center dimension establishes a precise drilling pattern, which streamlines layout and speeds repeat drilling across a bank of doors or drawers.
• The zinc die-cast construction forms a rigid, single-piece pull body, which supports consistent feel when gripping and helps maintain shape under normal cabinet use.
• The oil-rubbed bronze finish delivers a dark, muted metal look, which helps the pull blend with traditional cabinet styles and other bronze-finished hardware in the same space.
• The 5-3/16 in overall length sets the visual footprint on the front, which helps balance the pull against different drawer widths and door stile sizes in a run of cabinetry.
• The 1 in projection defines how far the pull stands off the surface, which provides working finger clearance without projecting excessively into tight walkways or small spaces.
• The 7/16 in width creates a slim front edge profile, which suits smaller fronts and allows a clean, understated appearance on both doors and drawers.

Amerock Conrad Pull Mounting And Fit Details

The 3-3/4 in (95 mm) center-to-center mounting size on this Amerock Conrad pull sets the required hole spacing, which guides drilling jigs and measurements during installation. With a 5-3/16 in overall length, the pull covers the mounting area with some overhang beyond the holes, which helps visually center the grip on most mid-width drawers and doors. The 1 in projection from the cabinet face controls how far the hand reaches out from the surface, providing clearance for fingers while keeping a tight profile that suits compact kitchens and shops. Its 7/16 in width defines a narrow front face, which can be useful when working near adjacent hardware or on narrow frame members. The zinc die-cast material supports precise casting of these dimensions, which helps pulls line up evenly when many pieces are installed in a row.

Using The Conrad Pull In Cabinet Layouts

Where This Amerock Conrad Pull Works Best

The Amerock Conrad Series 3-3/4 in (95 mm) center-to-center oil-rubbed bronze pull fits projects where a standard 3-3/4 in drilling pattern is planned across multiple cabinet fronts. Its 5-3/16 in overall length suits typical kitchen, bath, or shop drawer widths that benefit from a mid-size handle span. The oil-rubbed bronze finish aligns with cabinetry that relies on darker metals to coordinate with hinges or other decorative hardware in the same zone. Because the pull projects 1 in from the face, it serves well on fronts where users need enough space to hook fingers behind the grip while keeping a low visual profile. The 7/16 in width pairs well with narrower rails or stile faces, allowing the pull to sit comfortably without overwhelming slimmer frame members.

Details That Support Consistent Cabinet Results

The defined 3-3/4 in (95 mm) center-to-center measurement on the Conrad pull supports consistent drilling, which helps installers repeat hole placement accurately with templates or jigs across a full kitchen or bank of shop cabinets. The 5-3/16 in total length ensures some material extends beyond the mounting points, which can help cover minor deviations at the edges of drilled holes on the front face. With a 1 in projection, the pull establishes a predictable standoff distance, supporting uniform shadow lines and finger clearance from one cabinet to the next. The 7/16 in width maintains a controlled front profile, helping rows of pulls line up neatly without visually crowding each other on smaller drawer fronts. Zinc die-cast construction holds these dimensions from piece to piece, which supports straight alignment and reduces rework when installing multiple pulls in sequence.

Common Questions About Amerock Conrad BP29202ORB

Select This Conrad Pull For Standard Layouts

The Amerock Conrad Series 3-3/4 in (95 mm) center-to-center oil-rubbed bronze pull BP29202ORB brings a defined drilling size, mid-length span, and 1 in projection to cabinet projects. Those dimensions, paired with a zinc die-cast body and oil-rubbed bronze finish, support consistent layout and a traditional look across doors and drawers. For work calling for a standard 3-3/4 in pull pattern in a dark bronze tone, this Conrad pull aligns the critical measurements and appearance in one part number.