Berenson Bravo Series 1-1/4" (32 mm) Center to Center Polished Chrome Tab Pull, - 1053-4026-P
Description
Bravo Edge Pull 32mm Center To Center Use
Bravo edge pull 32mm center to center describes a compact Berenson Bravo Series tab pull designed for cabinet and furniture doors or drawers where a low-profile grip is preferred. The Bravo name and series identification group this pull with matching decorative hardware, which helps keep visual lines consistent across a project. Its 1-1/4 inch center to center drilling suits small-scale fronts or tight layouts, so it fits where larger pulls look oversized. The aluminum material keeps the pull lightweight, which reduces load on thin fronts during repeated use. A polished chrome finish gives the tab pull a bright, reflective surface, which adds a clean, modern look to casework. The tab-style shape lets the pull sit at the edge so the front face stays mostly uninterrupted, supporting contemporary flat-panel designs.
Key Bravo Edge Pull Details For Projects
- The 1-1/4 inch (32 mm) center to center drilling sets the hole spacing, which simplifies layout when repeating this pull across several doors or drawers in a run.
- The aluminum construction provides a rigid but lightweight pull body, which supports daily opening and closing without adding noticeable weight to smaller fronts.
- The polished chrome finish creates a smooth, shiny surface, which visually pairs with other polished chrome decorative hardware on the same installation.
- The 1-3/4 inch length specification defines how far the tab extends along the edge, which helps coordinate proportions on narrow or small cabinet fronts.
- The 3/4 inch width measurement defines the front-to-back size of the tab, which affects how much finger contact area is available when gripping the pull.
- The 1-3/4 inch projection describes how far the pull stands off the surface, which provides clearance for fingers to hook behind the tab during operation.
Mounting The Polished Chrome Tab Pull Accurately
The 1-1/4 inch center to center dimension on this Berenson tab pull gives a clear drilling pattern, which helps installers lay out holes quickly with jigs or templates. Because the pull is 1-3/4 inch long, it stays compact near the door or drawer corner, which suits edge mounting where space is limited. The 3/4 inch width keeps the pull narrow across the face, so it lines up neatly along thin fronts or tight reveals. Its 1-3/4 inch projection leaves space for fingers between the edge of the front and the back of the pull, which supports a comfortable grip when opening heavier cabinet sections.
Using The Berenson Bravo Edge Pull In Work
Where This Bravo Series Tab Pull Fits Best
The Berenson Bravo Series 1-1/4 inch center to center tab pull works well on cabinet doors or drawers that benefit from a minimal, edge-mounted grip. Its aluminum body and compact 1-3/4 inch length keep the pull visually light, which suits modern casework with flat fronts. The polished chrome finish ties into other polished chrome elements, allowing installers to maintain a consistent look across kitchens, baths, or built-ins. With a 3/4 inch width, the pull occupies a small footprint on the front, which helps in tight bank layouts where multiple fronts sit close together. The 1-3/4 inch projection supports finger access while keeping the pull from extending excessively into walkways, which is important on tall pantry doors or island ends.
Details That Support Repeatable Alignment And Layout
The precise 32 mm (1-1/4 inch) center to center drilling dimension allows installers to standardize hole patterns, which speeds repetitive installation on multi-unit projects. Since the overall length is 1-3/4 inch, there is a predictable amount of metal beyond the fastener centers, which aids in consistent setback from the cabinet edge. The 3/4 inch width keeps each pull uniform in cross-section, which simplifies aligning several pulls along a horizontal or vertical line. Aluminum construction keeps each piece similar in weight, which makes doors and drawers feel balanced when fitted in pairs. The polished chrome finish is uniform across the pull surfaces, helping finished runs of hardware appear even and coordinated from cabinet to cabinet.
Common Questions About This Bravo Edge Pull
What are the drilling dimensions for this tab pull?
The Berenson Bravo Series tab pull has a 1-1/4 inch (32 mm) center to center dimension, which sets the hole spacing for accurate door or drawer layout.
How large is the Berenson Bravo Series edge pull?
The tab pull is 1-3/4 inch long with a 3/4 inch width and 1-3/4 inch projection, which defines its footprint and finger clearance on the cabinet front.
What material is this Bravo edge pull made from?
The Bravo edge pull is made from aluminum, which provides a lightweight pull body suited to cabinetry and furniture fronts.
What finish does the 1053-4026-P tab pull have?
The Berenson 1053-4026-P tab pull has a polished chrome finish, which delivers a bright, reflective look on cabinet or furniture surfaces.
How does the 1-3/4 inch projection affect grip?
The 1-3/4 inch projection sets how far the pull stands off the front, providing space for fingers to hook behind the tab during operation.
Which collection does this polished chrome pull belong to?
This polished chrome tab pull is part of the Bravo Collection, which supports coordinated decorative hardware selection across a project.
Choose This Pull For Coordinated Bravo Installations
The Berenson Bravo Series 1-1/4 inch center to center polished chrome tab pull matches projects that call for a compact, edge-style grip with defined drilling dimensions. Its aluminum construction, 1-3/4 inch length, 3/4 inch width, and 1-3/4 inch projection combine into a small but functional form that suits modern fronts. Using the Bravo Collection identification and the 1053-4026-P part number supports repeat ordering for multi-room or multi-unit work where consistent hardware matters.
