Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Bravo edge pull 56mm center to center describes a Berenson Bravo Series tab pull designed to give a low-profile grip on cabinet doors or drawers while keeping hardware lines minimal. The 2-3/16 inch (56 mm) center to center dimension positions the screw holes at a common cabinet spacing, which supports consistent hole layout across a run of fronts. The polished chrome finish reflects surrounding surfaces, helping the pull visually tie into other bright chrome hardware in the same project. The aluminum material keeps weight down on the door or drawer front, which supports smooth operation on lighter hinges or slides. With a projection of 1-3/4 inch, fingers can catch the pull edge without needing a large handle footprint, which is useful on narrow fronts. The 3/4 inch width concentrates the pull line along the edge, which keeps the look clean while still giving a clear grip point.
The 2-1/4 inch listed center to center dimension matches the 2-3/16 inch (56 mm) measurement reference, giving a compact mounting span that suits small to medium cabinet fronts. This center spacing guides drilling patterns, so repeated pulls align across multiple doors or drawers. The 3 inch screw length or diameter reference defines the screw spec used with this pull, which directly affects how it seats through typical cabinet door thicknesses. The tab style design positions the grip at the edge, which means the pull mounts near the front corner rather than centered on the panel, helping maximize usable drawer width. The aluminum body keeps drilling forces modest during installation, which is helpful when working close to door or drawer edges.
The Bravo edge pull 56mm center to center layout is tailored to cabinet doors and drawers that benefit from a compact, edge-mounted grip. The 2-3/16 inch center to center span locates fasteners close together, which suits narrower rails or thinner drawer fronts without overwhelming the face. The 1-3/4 inch projection extends the gripping point away from the cabinet face, so fingers clear the front while opening, which helps when doors sit close to adjacent appliances or walls. The 3/4 inch width keeps the profile slim along the edge, which lets multiple pulls sit near each other on tight drawer stacks without visual clutter. The polished chrome finish supports use in projects where other bright chrome components appear, aligning this pull with hinges or faucets in the same finish family. The aluminum construction keeps the working weight low at the edge of the front, which supports smooth opening on smaller cabinetry.
The specified 2-1/4 inch center to center dimension provides a fixed drilling distance that can be repeated across shop jigs, supporting consistent hole placement on production runs. The 56 mm reference gives a metric equivalent for layouts based on millimeter systems, which is useful in shops that alternate between imperial and metric setups. The 3 inch screw size note defines the screw spec used with this pull, which affects how far the fastener extends through the door or drawer front for secure clamping. The 1-3/4 inch projection pairs with the edge-mount design to control how far the pull stands off, which can reduce interference with adjacent doors when gaps are tight. The 3/4 inch width guides how much material needs to be available at the edge, which matters when positioning the pull on narrow stiles or thin rails while keeping enough wood around the mounting holes.
The Berenson Bravo Series tab pull has a 2-3/16 inch (56 mm) center to center, which sets a compact mounting span suited to smaller cabinet doors and drawers.
The Bravo edge pull is made from aluminum with a polished chrome finish, which provides a light pull body with a bright, reflective surface for modern cabinet projects.
The Bravo tab pull projects 1-3/4 inch from the cabinet face, giving room for fingers to grab the edge while staying compact for tight installations.
The pull is 3/4 inch wide, which keeps the grip narrow along the cabinet edge and helps it fit on slim rails or closely spaced drawer fronts.
The 56 mm center to center and edge-mounted tab design suit cabinet doors and drawers that need a small, modern pull along the front edge.
The 1058-4026-P part number identifies this specific Berenson Bravo edge pull configuration, helping match exact size, material, and finish across a project.
The Bravo edge pull 56mm center to center design from Berenson Corporation brings a compact, edge-mounted grip to cabinet doors and drawers using aluminum construction and a polished chrome finish. The defined 2-3/16 inch center to center layout, 1-3/4 inch projection, and 3/4 inch width work together to support consistent drilling, comfortable reach, and a slim visual profile. For projects calling for a modern tab pull with a bright chrome look and a small mounting span, this Bravo Series option from Wurth Baer Supply aligns well with edge-focused cabinet hardware layouts.
Sold In: 1 Each
