Berenson Bravo Series 1-1/4" (32 mm) Center to Center Verona Bronze Tab Pull, - 1055-40VB-P

Berenson Bravo Edge Pull For Compact Cabinet Grabs

Berenson Bravo edge pull gives a low-profile way to open cabinet doors and drawers using a compact tab design that mounts at the edge, which helps when a project calls for a modern look without large protruding handles. This pull is part of the Bravo Collection, so its geometry and styling match other pieces in the same line, helping a run of cabinets look visually consistent across a room. The pull is made from aluminum, which keeps weight down on doors and drawer fronts, useful when working with lighter materials or smaller fronts. A Verona Bronze finish on the aluminum adds a bronze-toned appearance, bringing a darker metallic look to face frames or slab fronts where that color tone is important to the design scheme. With its focused size and finish combination, this tab pull suits jobs where the goal is a discrete grip point that still reads as intentional decorative hardware.

Bravo Edge Pull Details That Support Cabinet Work

• The 1-1/4 inch (32 mm) center to center dimension sets a tight mounting span, useful on narrow drawer fronts or door rails where space is limited yet a consistent drill pattern is needed across multiple cabinets.
• A 1-3/4 inch overall length creates a compact tab that does not dominate small fronts, which matters when hardware must function well while keeping visual focus on the cabinet material or door profile.
• The 1-3/4 inch projection gives enough stand-off from the door edge to establish a practical grip area, helping hands catch the pull comfortably while still keeping overall cabinet lines relatively flush.
• A 3/4 inch width keeps the tab slim across the edge, which is useful when pulls sit close together on narrow drawer stacks or when clearance between adjacent fronts is part of the layout.
• The Verona Bronze finish defines the color tone of the pull, helping it coordinate with other Verona Bronze decorative hardware elements within the same Bravo Collection on a project.

Installation Dimensions For Precise Edge Pull Layout

The 1-1/4 inch (32 mm) center to center measurement on this Berenson Bravo edge pull defines the hole spread for mounting, allowing repeatable drilling across doors and drawers using the same spacing. Its 1-3/4 inch length means the pull extends only a short distance along the cabinet edge, which matters when locating it near corners or next to other hardware where overlap could affect operation. A 3/4 inch width controls how far the tab occupies space across the door or drawer face at the edge, supporting predictable alignment when hardware must line up down a run of cabinets. With a 1-3/4 inch projection, the tab stands off the surface far enough to grasp while still maintaining a shallow overall profile along the cabinet front.

Using This Verona Bronze Tab Pull In Cabinet Projects

Where The Bravo Edge Pull Works On Cabinets

The Berenson Bravo edge pull fits cabinet applications where a small aluminum tab at the edge is preferred over a larger handle, such as on minimalist kitchen fronts or utility cabinets that benefit from streamlined hardware. Its role as a handle and pull in the decorative hardware category positions it for use on typical cabinet doors and drawers rather than structural components, keeping it focused on daily opening and closing tasks. The aluminum construction helps match projects that already specify aluminum decorative hardware, so this pull can sit comfortably alongside other aluminum pieces while maintaining material consistency. Because the finish is Verona Bronze, the pull brings a bronze-toned accent to cabinet faces, which is valuable on installations that use darker hinges or complementary bronze details and need hardware color alignment along the run.

Why The Dimensions Support Repeatable Cabinet Results

The 32 mm center to center dimension on this Bravo edge pull ties directly to a 1-1/4 inch mounting span, giving installers a precise measure for drilling jigs or layout marks, which supports consistent hardware placement from cabinet to cabinet. A 1-3/4 inch length lets the tab stay close to the edge without extending far along the rail or stile, reducing the chance of hardware crowding when multiple pulls are installed in tight groupings. With a 3/4 inch width, each pull occupies a limited strip at the edge, allowing uniform spacing between adjacent doors or drawers while still leaving enough surface for a comfortable grip. The 1-3/4 inch projection determines how far the pull stands away from the front, which in practice shapes the feel of the grab point and helps maintain clearances in tight walkways or between opposing cabinet runs.

Common Questions About This Berenson Bravo Edge Pull

Selecting This Bravo Edge Pull For Your Next Job

Berenson Bravo edge pull in Verona Bronze pairs a 1-1/4 inch (32 mm) center to center layout with a compact 1-3/4 inch by 3/4 inch tab, giving you a defined pattern and footprint to work into cabinet designs. The 1-3/4 inch projection and aluminum construction establish a practical, lightweight grip point that suits everyday door and drawer use. When a project calls for decorative hardware from the Bravo Collection with a Verona Bronze finish, this tab pull offers a consistent size, material, and color profile to carry across your cabinet run.