Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1-5/16 diameter closed flange gives you a secure end support for round closet rods using a tube with a 1-5/16 inch outside dimension, so the rod seats firmly and stays aligned under normal closet loads. As part of the Pro Value Series, this flange follows common closet hardware standards, which helps keep your layouts consistent across multiple installs. The flange is designed specifically for round closet rods, so the fit between rod and cup stays tight and reduces play over time. Its closed design surrounds the end of the tube, which helps control rod movement and keeps hangers tracking smoothly along the length of the rod in everyday use.
This pin mount closet rod flange uses two pins set 32mm on center, so it aligns with systems based on a 32mm drilling pattern in cabinetry. Each pin is sized for 5mm bore holes, which allows the flange to be pressed into standard 5mm system holes used on many closet side panels. A center screw hole is located between the pins, so you can add a screw through the face of the flange into the panel and lock the mounting in place. This combination of two 5mm pins and a center screw connection gives the flange face support from the pins and pull-out resistance from the screw in everyday closet service.
This closed flange is made for round closet rods using a 1-5/16 inch outside dimension tube, so it fits well in wardrobe, reach-in, or utility closet layouts that rely on that standard rod size. The 32mm on center pin spacing works with panel systems drilled on a 32mm grid, which is common in manufactured closet and cabinet construction. Because the pins are designed for 5mm bore holes, the flange seats directly into system holes in cabinet sides or partitions without altering the drilling pattern. The dull chrome finish coordinates with other dull chrome closet rod components, which helps maintain a unified look when rods and flanges are visible beneath shelving.
The two pins on this flange are fixed at 32mm on center, so once the side panel holes are drilled, each flange locates itself consistently from panel to panel, helping maintain parallel rod runs. Using 5mm bore holes for the pins means the flange indexes off standard system holes, which helps keep rod height and setback repeatable across multiple closet sections. The center screw hole allows a screw to clamp the flange face tight to the panel, so the pins handle shear forces while the screw handles pull-out forces under clothing loads. The zinc alloy construction keeps the body rigid under these forces, which supports long-term alignment of the rod seating surface. With the closed cup surrounding the tube end, the rod bears against a continuous rim, helping distribute loading around the tube and reducing point pressure at the edge.
This closed flange holds a tube with a 1-5/16 inch diameter outside dimension, so it is suited to round closet rods built to that common size.
The flange uses two pins spaced 32mm on center that fit into 5mm bore holes, so it seats directly into standard system holes in a closet side panel.
The center screw hole lets a screw draw the flange tight to the panel, so the pins locate the part while the screw helps resist pull-out under load.
This Pro Value Series flange is made of a zinc alloy, giving the part a solid metal body that maintains its shape when supporting typical closet rod loads.
The 32mm on center spacing aligns with cabinet and closet systems that use a 32mm drilling grid, helping the flange drop into existing layout patterns.
The dull chrome finish gives a muted metallic appearance that coordinates with other dull chrome closet hardware, supporting a consistent look under shelving.
This Pro Value Series dull chrome closet rod flange combines a 1-5/16 inch closed cup with a 32mm, 5mm pin mount layout, so it ties directly into standard round rods and system-drilled panels. For new closet sections or matching existing 32mm cabinetry, this zinc alloy flange provides a defined seat for the rod end and a familiar mounting pattern. Use its pinned mounting and center screw hole to set up straight, repeatable rod runs in your next shelf and closet organization project.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  UF53435-48-025 Mfr# 53435 48 025 | PRO Value 1-5/16" x 96" Round Closet Rod, Dull Chrome, 53435 48 025 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  UF54231-53-041 Mfr# 54231 53 096 | PRO Value Closed Round Flange with Pins For 1-5/16" Round Tubing, Oil Rubbed Bronze, 54231 53 096 | ||||
Sold in: 1 Each |  UF54231-51-040 Mfr# 54231 51 040 | PRO Value Closed Round Flange with Pins For 1-5/16" Round Tubing, Matte Black, 54231 51 040 | ||||
Sold in: 1 Each |  UF54231-49-076 Mfr# 54231 49 076 | PRO Value Closed Round Flange with Pins For 1-5/16" Round Tubing, Dull Nickel, 54231 49 076 | ||||
Sold in: 1 Each |  UF54231-47-039 Mfr# 54231 47 039 | PRO Value Closed Round Flange with Pins For 1-5/16" Round Tubing, Dull Brass, 54231 47 039 | ||||
Sold in: 1 Each |  UF54231-46-089 Mfr# 54231 46 089 | PRO Value Closed Round Flange with Pins For 1-5/16" Round Tubing, Chrome, 54231 46 089 |