PRO Value Closed Round Flange with Pins For 1-5/16" Round Tubing, Chrome, 54231 46 089

1-5/16 Inch Diameter Closed Flange For Closet Rods

1-5/16 inch diameter closed flange is designed to hold a 1-5/16 inch outside dimension round closet rod, so the rod seats positively in the cup and stays aligned at the end of a run. As a closed style flange from the Pro Value Series, it surrounds the rod end, which helps keep rod position consistent under typical closet loads. The flange is made of a zinc alloy, giving the mounting point a solid metal body where the rod and fasteners meet. A polished chrome finish on the exposed surface presents a bright, finished appearance that matches common closet tubing finishes.

This Pro Value Series part is classified under closet rods and flanges, so it is built specifically for closet, shelf, and garage organization layouts using round tubing. The manufacturer part number 54231 46 089 ties this flange to other 1-5/16 inch round rod components when standardizing across projects.

Key Flange Details For Closet Rod Projects

• The flange is made of a zinc alloy, creating a rigid metal support point that resists distortion where the closet rod and mounting fasteners meet, which supports long-term straight alignment of the 1-5/16 inch tube.
• It holds a 1-5/16 inch diameter outside dimension tube, so standard 1-5/16 inch round closet rods seat securely, reducing side play at the rod end and helping doors and hanging space line up as planned.
• The flange has two pins, 32mm on center for 5mm bore holes, so it aligns with 32mm system drilling patterns and locates accurately in pre-drilled 5mm holes on closet panels.
• An additional center screw hole in the flange provides a direct fastener point into the panel, adding pull-out resistance and helping the rod stay anchored when the closet is fully loaded.
• The polished chrome finish on the flange face coordinates with polished chrome closet rods, keeping visible hardware consistent across a run of rods and supports a clean, professional appearance.
• Flanges are available in six finishes per the series, which allows matching this same 1-5/16 inch configuration to different finish schemes while keeping drilling and rod size consistent across multiple projects.

Pin Mount Flange And Rod Fit Details

This pin mount closet rod flange uses two fixed pins set 32mm on center for 5mm bore holes, so it drops into standard 5mm system holes in closet side panels without layout work. Those pins position the flange before the center screw is driven, which keeps the 1-5/16 inch rod location repeatable from section to section. Because it holds a 1-5/16 inch outside dimension tube, the fitter can use common 1-5/16 inch round closet tubing and know it will seat into the closed cup and bear on the full circumference.

The center screw hole gives a straightforward way to anchor the metal body to the substrate, tying the zinc alloy flange firmly to the panel surface so the rod support stays stable as loads change over time.

Using This Pro Value Closet Rod Flange

Where This 1-5/16 Inch Flange Fits Best

This 1-5/16 inch diameter closed flange from the Pro Value Series fits closet, shelf, and garage organization layouts that use round 1-5/16 inch outside dimension tubing as the primary hanging member. Because the flange sits in the Closet Tubing and Flanges category, it is intended for use at the ends of round closet rods where a closed cup design is preferred to capture the rod end. The polished chrome finish pairs with polished chrome round closet tubing in visible wardrobe sections or utility storage where a clean metallic look is desired. With two pins sized for 5mm bore holes on a 32mm center spacing, the flange fits cabinets and closet systems based on the 32mm drilling standard, so panel manufacturers using that system can integrate this part into their layouts.

The zinc alloy construction concentrates strength at the connection between the closet rod and the panel, which is often the point most affected by long-term hanging loads. By matching this flange to 1-5/16 inch tube, installers keep one rod size across multiple openings while still selecting different finishes from the series when a project mixes closet and garage spaces.

Why Pin Mount And Closed Cup Support Matter

The pin mount flange design, with two pins spaced 32mm on center for 5mm bore holes, provides a self-locating mounting method that aligns the flange with pre-drilled system holes before the center screw is driven. This pin engagement stabilizes the flange laterally as the closet rod is loaded, reducing the tendency for the support to rotate or drift on the panel face. The closed cup configuration that holds a 1-5/16 inch outside dimension tube supports the rod around its full perimeter at the end, which spreads load and helps maintain rod straightness along the run.

The center screw hole works with the zinc alloy body to clamp the flange tightly to the substrate, turning the panel into a reliable bearing surface for the rod end. Because the flange surface is finished in polished chrome, any exposed hardware at the rod ends matches polished chrome tubing and adjacent polished chrome components from the same Pro Value Series, supporting a consistent look when building out a full closet or garage system.

Common Questions About This Closet Rod Flange

Choose This Flange For 1-5/16 Inch Rod Runs

This 1-5/16 inch diameter closed flange from the Pro Value Series combines a zinc alloy body, polished chrome finish, and two-pin 32mm system mounting to support standard 1-5/16 inch round closet rods. By using the pin mount with 5mm bore holes and a center screw hole, the flange brings accurate, repeatable rod positioning to closet, shelf, and garage organization projects built around the 32mm drilling system. Selecting this polished chrome version of part number 54231 46 089 aligns rod size, finish, and mounting pattern across openings so hanging runs stay consistent from section to section.