PRO Value 1-5/16" Open Round Flange with Pin, Dull Brass, 54131 47 047

1-5/16 Diameter Open Flange For Closet Rods

1-5/16 diameter open flange for round closet rods from the Pro Value Series creates a fixed support point for a 1-5/16 inch outside dimension tube, so the rod sits correctly for hanging space in a closet run. The flange is made of a zinc alloy, giving a rigid metal base that holds shape under normal closet loading. Its open style lets the round closet rod drop in from the front, which helps during installation when the tube is already cut and positioned between walls. The dull brass finish provides a muted brass look that coordinates with similar closet and shelf hardware in the same finish family. As part of Wurth Baer Supply offerings, this closet tubing flange fits into a broader system of shelf, closet, and garage organization components for straightforward layout of hanging sections.

Key Closet Flange Details That Help On Site

• The flange holds a 1-5/16 inch diameter outside dimension tube, so the rod and flange interface properly and reduce play where the tube seats during hanging loads.
• The zinc alloy construction forms a solid mounting base, which supports the round closet rod where it meets the wall or panel and maintains alignment over time.
• The flange uses two pins set 32mm on center, so it pairs with standard 32mm system drilling patterns commonly used in cabinet and closet panels.
• The two pins are designed for 5mm bore holes, allowing the flange to register in predrilled 5mm system holes and stay located accurately while fastening.
• A center screw hole in the flange lets an installer drive a fastener through the middle of the fitting, pulling the zinc alloy base tight to the surface for a firm seat.
• The dull brass finish presents a subdued brass tone, which visually matches other dull brass closet rods or fittings in the same installation area.

Pin Mount Closet Flange Installation Details

This pin mount closet rod flange uses two pins set 32mm on center for 5mm bore holes, so it drops into 5mm system holes in cabinet or closet side panels in line with a 32mm drilling grid. Once the pins sit in the bores, the center screw hole lets a fastener draw the zinc alloy body tight to the substrate, locking the 1-5/16 inch diameter tube support in position. Because it holds a 1-5/16 inch outside dimension tube, the flange establishes the rod height and side clearance expected for that common closet tubing size. The open configuration on the face lets the round closet rod be lowered straight into the saddle after the flanges are fixed, which can simplify setting rods between opposed panels during layout work.

Using This Pro Value Series Flange In Closet Runs

Where This 1-5/16 Tube Flange Fits Best

This Pro Value Series closet rod flange is designed for round closet rods with a 1-5/16 inch outside dimension, so it serves in standard hanging sections within closet, shelf, and garage organization layouts. The zinc alloy body belongs in interior closet and cabinet applications, where it provides a rigid metal interface between the side panel and the tube. Because the pins are laid out 32mm on center for 5mm bore holes, the flange fits neatly into 32mm system hole rows drilled in cabinet-grade panels. That pattern is common in adjustable shelf systems, so this flange can share vertical rows with other fittings on the same panel face. The dull brass finish ties it visually to dull brass closet tubing and other brass-tone hardware in the same organization system.

How Pin Mount And Open Design Support Results

The two 5mm pins on 32mm centers help position the flange square to the panel, which matters when two opposing flanges must align to carry a straight 1-5/16 inch rod across a span. The pins in 5mm bore holes resist rotation while the center screw is driven, so the open saddle remains oriented correctly for the round closet rod. The center screw hole concentrates the clamping force in the middle of the zinc alloy flange, pulling it flush and giving consistent tube support along the contact face. Because the flange is open on one side, the round closet rod can be cut to length first and then set down into the flanges without threading through an enclosed ring. That open style is useful during replacements, as the 1-5/16 inch tube can be lifted out and re-seated without disturbing surrounding closet components. The combination of 1-5/16 inch tube fit, pin mount layout, and dull brass finish creates a predictable interface that supports repeatable results across multiple closet sections using the same Pro Value Series hardware.

Common Questions About This Closet Rod Flange

Selecting This Dull Brass Flange For Your Run

The 1-5/16 diameter open flange for round closet rods offers a zinc alloy body, pin mount layout with 32mm on center pins for 5mm bore holes, and a dull brass finish, so it fits neatly into system-drilled closet panels using 1-5/16 inch tubing. For projects built around the Pro Value Series, this flange matches the 1-5/16 inch closet rod size and drilling pattern already in common use, supporting consistent layouts across multiple openings. Ordering through Wurth Baer Supply in broken or full box quantities lets you align purchases with job sizes while standardizing on one closet flange specification.