1-5/16" Diameter Open Flange for Round Closet Rods, Pin Mount, Oil-Rubbed Bronze Finish

1-5/16 Inch Closet Rod Flange For Round Rods

1-5/16 inch closet rod flange describes a Pro Value Series open flange that supports round closet rods with a 1-5/16 inch outside diameter tube, so it matches standard round closet tubing in many closet, shelf, and storage layouts. The flange is made of a zinc alloy, which provides a rigid metal body that helps the rod stay aligned under normal closet loading conditions. This flange has an open design for round closet rods, so the rod drops in from above rather than threading through, which simplifies rod placement during layout or replacement work. An oil-rubbed bronze finish covers the zinc alloy body, giving the closet hardware a dark, uniform appearance that coordinates with other oil-rubbed bronze closet components on the job.

Closet Rod Flange Details That Support Installs

• The flange holds a 1-5/16 inch diameter outside dimension tube, so it directly matches common round closet rods and helps keep the rod centered and supported at the wall or panel.
• The open flange design for round closet rods allows the rod to be set down into the support from above, which speeds up installation and simplifies rod removal during adjustments or reconfigurations.
• The flange is made of a zinc alloy, giving the part a solid metal structure that resists deformation in normal closet use and helps maintain straight rod alignment over time.
• The oil-rubbed bronze finish provides a consistent dark appearance across the visible face of the flange, helping the hardware blend with matching oil-rubbed bronze rods and other trim details.
• The flange has two pins, 32mm on center for 5mm bore holes, so it engages with 5mm system holes and aligns quickly in cabinet or closet panels drilled on a 32mm system.
• A center screw hole is built into the flange, giving an additional fastening point so the flange stays anchored once pinned into the panel or support surface.

Pin Mount Flange Mounting And Hole Layout

This pin mount closet rod flange has two pins set 32mm on center, so it is suited for panels that use 5mm bore holes on a 32mm drilling pattern, such as many cabinet and closet systems. The pins fit 5mm bore holes, which helps locate the flange without separate layout marks and supports consistent positioning across multiple cabinets or sections. A center screw hole is also part of the flange, adding a mechanical fastener location to work with the pins and provide a firm hold on the panel or substrate. Together, the pins and screw point create a three-point contact that helps keep the 1-5/16 inch round rod seated and reduces unwanted movement in day-to-day closet use.

Closet Rod Flange Use In Storage Projects

Where This Open Flange Fits Closet Layouts

This open flange for round closet rods is designed for 1-5/16 inch diameter outside dimension tube, so it fits applications using that specific round closet tubing size in reach-in or walk-in setups. The pin mount design with two pins spaced 32mm on center for 5mm bore holes aligns with panels drilled on a 32mm system, so it supports closet systems and cabinet interiors built around that hole spacing. Because the flange is made of a zinc alloy, it functions as a sturdy mounting point for the rod at cabinet sides, end panels, or wall-mounted supports where metal hardware is preferred. The oil-rubbed bronze finish presents a dark tone across the visible flange face, allowing the part to coordinate with oil-rubbed bronze rods and other decorative hardware in the same closet assembly.

Why These Mounting Details Support Repeatable Results

The two pins on this closet rod flange locate into 5mm bore holes on a 32mm pattern, which standardizes the mounting position and reduces layout variation between sections when installing multiple supports. Holding a 1-5/16 inch diameter outside dimension tube keeps the rod centered in the open flange, which contributes to a consistent hanging height across the closet when rods of the same size are used. The zinc alloy construction provides a uniform, cast metal body that supports the rod at the mounting point, helping limit flexing at the connection in everyday service. The oil-rubbed bronze finish is applied over the zinc alloy, providing a finished surface that visually aligns with other oil-rubbed bronze components and helps deliver a unified appearance on built-ins and closet systems. The integrated center screw hole works with the 5mm pins so the flange can be both located by the pins and fastened through the center, creating a repeatable fastening approach across similar installations.

Key Questions About This Closet Rod Flange

Selecting This Flange For Closet Rod Runs

This Pro Value Series open flange is made of zinc alloy, holds a 1-5/16 inch outside diameter round closet rod, and uses pins 32mm on center for 5mm bore holes, so it suits 32mm-based closet systems using that rod size. The oil-rubbed bronze finish ties the visible hardware into similar finish components across the project, which is useful when building coordinated storage in closets or cabinet interiors. For jobs that call for an open support on 1-5/16 inch round closet tubing with pin mounting and an oil-rubbed bronze look, this flange provides those specific attributes in one part.