PRO Value 1-5/16" Open Round Flange with Pin, Dull Nickel, 54131 49 083

1-5/16 Inch Open Closet Rod Flange For Round Rods

1-5/16 inch open closet rod flange describes a pin mount flange that supports a round closet rod with a 1-5/16 inch outside diameter tube, so it matches standard round closet tubing used in many closet layouts. This open flange design holds the rod from below while allowing the front of the rod to drop into place, which helps during installation in tight closet interiors. The flange is made of a zinc alloy, so the body provides a solid metal seat for the tubing during daily use. The satin nickel finish gives the visible face a neutral, contemporary look, which helps it coordinate with other satin nickel closet hardware. The flange is part of the Pro Value Series, so it fits directly into that line of closet tubing and components used by many shops and installers.

Closet Flange Details That Support Daily Use

• The zinc alloy construction creates a rigid mounting base for the closet rod, which helps the 1-5/16 inch diameter tube stay aligned along the run under typical hanging loads.
• The satin nickel finish on the flange provides a consistent visual match with satin nickel closet rods and fittings, which helps installations maintain a unified appearance across a project.
• The flange holds a 1-5/16 inch diameter outside dimension tube, which lets installers pair it with standard 1-5/16 inch round closet rods already specified for the job.
• The open style of the flange lets the rod drop in from the front, which can simplify fitting the tube between side panels or walls in an assembled closet.
• The Pro Value Series branding ties this flange to a known product family, which helps shops repeat the same hardware combination across multiple closet builds.

Pin Mount Flange Layout For Closet Installation

The flange has two pins spaced 32mm on center for 5mm bore holes, so it fits directly into a 32mm-system drilling pattern commonly used on closet panels. Those 5mm pin bores give the flange a positive location on the panel before the fastener is driven, which helps hold position along the line of cabinets or partitions. A center screw hole is located between the pins, so the installer can add a fastener through the middle of the flange to lock it to the panel. This combination of pins plus center hole helps keep the 1-5/16 inch rod height and projection consistent from one cabinet or panel to the next.

Using This Satin Nickel Flange In Closet Projects

Where This 1-5/16 Inch Flange Fits Best

This open flange works with round closet rods that have a 1-5/16 inch outside diameter, so it suits standard hanging sections in bedroom closets and similar wardrobe runs. The two pins on 32mm centers are sized for 5mm bore holes, which aligns naturally with panels drilled on a 32mm line in closet systems or cabinet-style partitions. Because the flange is made of zinc alloy with a satin nickel finish, it is suited to interior closet environments where metal hardware is visible at the ends of the rod. The satin nickel finish also coordinates with other satin nickel closet rod flanges and fittings in the same Pro Value Series, which benefits projects that repeat that finish across multiple openings.

Why The Pin Mount And Format Support Consistency

The pin mount layout, with two pins 32mm on center for 5mm bores, lets installers rely on system drilling to position each flange, which supports fast, repeatable mounting on both sides of a closet span. Once the pins are seated in the panel, the center screw hole gives a point for a single fastener, which secures the zinc alloy body so the 1-5/16 inch diameter tube stays at the designed height. Because the flange is open on the front, the rod can slide or drop into place after both ends are set, which helps reduce rework when trimming rod length to hit side walls or partitions. The satin nickel finish on the flange face keeps the visible hardware consistent with satin nickel rods, which supports clean lines when doors are opened and the hardware is in view.

Key Questions About This Closet Rod Flange

Choose This Flange For 1-5/16 Inch Closet Rods

This Pro Value Series satin nickel flange is made of zinc alloy and holds a 1-5/16 inch diameter tube, so it matches standard round closet rod stock many shops already use. The two pins on 32mm centers for 5mm bore holes, plus the center screw hole, give a straightforward mounting layout on closet panels. When a project calls for a satin nickel, pin mount, open-style support for 1-5/16 inch round closet rods, this flange provides a matched component within the same product family.