
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Knape and Vogt TD tray divider is a stationary tray organizer designed to create vertical storage lanes inside a cabinet, so trays, pans, or boards stay separated and accessible instead of shifting into a single stack. This frosted nickel 15/16 inch tray organizer presents a finished metal look inside the cabinet, helping projects match other frosted nickel hardware where that appearance is important to the job. As part of the KV TD series stationary tray dividers, the TD18-1-FN fits into projects that already specify that TD series, keeping product selection straightforward across a kitchen or bath run. The SAP description notes an 18 inch height, so the divider stands tall enough to support typical cabinet trays along most of their edge, which helps reduce wobble when trays are slid in or out. Standard tray dividers in this series install with 4 screws, giving a firmly fixed divider that resists movement under everyday use.
The web description states that standard tray dividers in this TD series install with 4 screws, so the installer anchors the divider directly to the cabinet structure for a solid, non-moving support. The roll out tray dividers in the same series use a different method by screwing a slide bracket to the base of the cabinet, showing that this TD18-1-FN stationary version is intended for fixed lanes rather than moving roll outs. This distinction allows a designer to specify stationary dividers where simple separation is needed, while reserving slide-bracket roll out options for cabinets that require pull-out access. TD series stationary tray dividers are part of the Base Cabinetry Organizers and Fillers category, so the mounting approach aligns with typical base cabinet construction and interior clearances.
The SAP description lists an 18 inch height, which suits many base cabinet interiors where full-height vertical support for trays is desired. In that space, the stationary tray divider creates lined lanes for items like baking sheets or cutting boards, using the full height to steady each piece. As a frosted nickel tray divider, it visually coordinates with frosted nickel hardware elsewhere in kitchens or baths, which matters when interiors are visible during door operation. The product belongs to the Kitchen & Bath Cabinet Accessories category under Base & Wall Cabinet Pull-Out Systems, tying its use to cabinet interiors that need organized vertical storage rather than open shelf stacks. Being part of the Base Cabinetry Organizers and Fillers product class, this divider is suited to filling otherwise open cabinet volume with structured, repeatable tray slots.
The TD18-1-FN identifier links this divider to the KV TD series stationary tray dividers described in the web text, so installers can match it with other TD series pieces specified on a project and keep component choices consistent. The stationary design keeps each divider firmly in place, allowing layout measurements to remain stable from cabinet to cabinet and reducing layout variation on multi-unit jobs. Standard tray divider installation using 4 screws provides a clear fastening scheme, which helps streamline the installation sequence when multiple dividers are used in one run of cabinetry. The distinction in the description between stationary tray dividers and roll out tray dividers that use a slide bracket to the base of the cabinet highlights how TD18-1-FN serves projects that only need fixed storage lanes instead of movable trays. The frosted nickel finish supports finished interior appearances that match other frosted nickel elements, which benefits designers who want coordinated metal tones throughout a cabinet line.
The TD18-1-FN tray divider is a Knape and Vogt TD series stationary tray organizer for cabinets, so it creates fixed vertical lanes to separate trays or similar items inside base or wall cabinetry.
The TD18-1-FN tray divider has an 18 inch height noted in the SAP description, so it supports most of the tray edge, helping keep stored pieces upright in typical cabinet interiors.
The standard TD series tray divider installs with 4 screws, so the divider fastens directly to the cabinet, providing a stable, non-sliding support for organizing trays.
The product is described as a KV TD series stationary tray divider, so it aligns with other TD series components used across kitchen and bath cabinet projects.
The TD18-1-FN tray divider has a frosted nickel finish, so it presents a muted metal look that coordinates with other frosted nickel cabinet hardware in a project.
The TD18-1-FN is a stationary tray divider, while TD roll out tray dividers use a slide bracket screwed to the cabinet base, so roll out versions move and this one stays fixed.
The Knape and Vogt TD18-1-FN stationary tray divider provides an 18 inch high frosted nickel organizer within the KV TD series, so it suits projects that call for fixed vertical tray lanes inside base cabinetry. With standard tray divider installation using 4 screws, it offers a defined mounting approach that supports repeatable layouts across multiple cabinets. For cabinet work needing structured tray storage with a frosted nickel look, this TD series stationary organizer is designed to fit that role.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FYTD12-1-FN Mfr# TD12-1-FN | Knape and Vogt TD Frosted Nickel 15/16" Tray Organizer, TD12-1-FN | ||||
Sold in: 10 Each | FYTD12-FN Mfr# TD12-FN | Knape and Vogt TD Frosted Nickel 15/16" Tray Organizer, TD12-FN | ||||
Sold in: 1 Each | FYTD18-1-W Mfr# TD18-1-W | Knape and Vogt TD Metal 15/16" Tray Organizer, TD18-1-W | ||||
Sold in: 10 Each | FYTD18-FN Mfr# TD18-FN | Knape and Vogt TD Frosted Nickel 15/16" Tray Organizer, TD18-FN |