Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Designers Group Ten knob gives cabinets a polished nickel touch while keeping a straightforward round shape that suits many shop-built projects. The knob is part of the Designers Group 10 collection, so its style stays consistent across matching pieces on a job. Its 1-3/16 inch diameter face provides a solid grip point for doors or drawers, which helps when heavier fronts are used. Made from zinc die cast material in a polished nickel finish, the knob combines a metal construction with a bright surface that stands out against both light and dark finishes. A 1-1/8 inch projection spaces the hand away from the cabinet face, which helps when clients want clean operation without fingers rubbing the surface. The 11/16 inch base transitions from the door or drawer front into the round head, keeping the footprint compact while still giving enough bearing area on the wood.
The 1-3/16 inch width of this Berenson Designers Group Ten knob sets the overall footprint, which helps when planning spacing between neighboring doors or drawers to avoid visual crowding. Its 1-1/8 inch projection defines how far it stands off the surface, which matters when doors swing past adjacent faces or trim. The 11/16 inch base lets the knob seat onto rails or stiles without overhanging thin framing, helping layouts on narrow members. An 8-32 screw size interface ties the knob to standard cabinet drilling practices for threaded pulls. The screw length is 1 inch, so standard door and drawer front thicknesses that match this length can be fastened using familiar boring patterns and tool setups around this thread size.
This polished nickel 1-3/16 inch diameter knob fits projects calling for the Designers Group 10 style and a round pull point. Its Designers Group 10 collection identity ties it directly to other pieces in that same series, which is useful when a project uses mixed hardware types but needs a consistent visual theme. The 1-3/16 inch diameter face works on full-size kitchen or bath doors, because it offers enough grab area without overpowering typical face frame or frameless fronts. On drawer fronts, that same diameter keeps the knob proportional to standard drawer widths so layouts stay balanced in rows and stacks. The 11/16 inch base seats cleanly on flat cabinet faces, which suits both panel doors and slab drawer fronts where a tight footprint around the mounting hole is preferred.
The zinc die cast material gives this Designers Group 10 knob a metal body that pairs with the polished nickel finish for a coordinated appearance with other polished nickel decorative hardware and moldings. That combination supports projects that use multiple Berenson decorative hardware pieces under the same finish color. The 1-1/8 inch projection keeps hands off the cabinet surface during opening and closing, which can help keep finished faces cleaner in high-touch areas. Because the knob is classified under knobs, Berenson, it lines up with other Berenson Corporation offerings for jobs that standardize on a single brand. The 30 mm diameter dimension also helps when converting plans that were designed in metric, since it corresponds closely to the 1-3/16 inch measurement noted in imperial layouts.
The 1-3/16 inch diameter on the Berenson Designers Group Ten knob allows installers to repeat a single drilling center across an entire run, which keeps visual spacing predictable from cabinet to cabinet. That consistent face size makes it easier to align knobs along rails or across drawer banks, because each piece covers a similar amount of surface. The 1-1/8 inch projection makes the standoff distance uniform from one door or drawer to the next, which supports straight sightlines down a run of cabinetry when viewed from the side. The 11/16 inch base dimension helps during layout by defining how close the knob can sit to panel edges or decorative profiles without overlapping them.
The 8-32 screw size connection ties the knob into a common cabinet hardware standard, which lets installers use familiar drilling and tap patterns for this thread. The 1 inch screw length works with typical cabinet door and drawer face thicknesses that match this dimension, so layouts can be planned around that fastener depth. The polished nickel finish and Designers Group 10 collection identity support repeatable design results across multiple rooms or phases, because the same knob profile and finish can be specified wherever that look is required. The zinc die cast construction keeps the body uniform from piece to piece, which supports consistent feel and geometry when multiple knobs are mounted in line on large installations.
The Berenson Designers Group Ten knob has a 1-3/16 inch (30 mm) diameter face, which sets a consistent grip area for doors and drawers on cabinet runs.
The knob projects 1-1/8 inch from the cabinet surface, which provides finger clearance and keeps hands away from the finished door or drawer face during use.
The 4143-1014-P knob is made from zinc die cast material, which gives it a solid metal body suited to repeated opening and closing of doors and drawers.
This Designers Group 10 cabinet knob has a polished nickel finish, which matches other polished nickel decorative hardware when coordinating a project.
The base of this Berenson cabinet knob measures 11/16 inch, which keeps the footprint tight on rails, stiles, or drawer fronts during layout.
This zinc die cast knob uses an 8-32 thread screw at 1 inch length, which aligns with common cabinet hardware installation practices using that thread size.
This Berenson Designers Group Ten polished nickel knob brings a 1-3/16 inch diameter face, 1-1/8 inch projection, and 11/16 inch base together in a consistent package. With zinc die cast construction, a polished nickel finish, and 8-32 x 1 inch screw sizing, it slots into cabinet hardware layouts that favor the Designers Group 10 look. For projects that repeat the same knob across doors and drawers, these fixed dimensions support clean alignment and a unified appearance across the run.
Sold In: 1 Each
