Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Designers Group 10 knob from Berenson Corporation is a zinc die cast cabinet knob in a polished nickel finish, so it gives cabinet doors and drawers a consistent metal look backed by a stable casting material. The 1-1/4 inch diameter head provides a defined gripping area that suits everyday door and drawer use. A projection of 1-5/16 inch sets the knob out from the surface so fingers clear the cabinet face easily during operation. The knob base measures 11/16 inch, which concentrates the load on a small footprint for a clean look at the mounting point. Matching 1-1/4 inch width and diameter keep the profile visually balanced on standard cabinet fronts.
The knob is designed around an 8-32 screw connection, so it works with standard 8-32 threaded holes commonly used in cabinet fronts. The 1 inch screw length specification aligns with typical door and drawer front thicknesses in many cabinet builds. With a 1-1/4 inch diameter and 1-5/16 inch projection, this knob sits at a practical reach distance while staying close enough to the surface for tight layouts. The 11/16 inch base centers the load around the screw location, supporting a firm feel at the mounting point.
This Berenson Designers Group Ten Series polished nickel knob is suited to cabinet doors and drawers where a 1-1/4 inch diameter pull point is appropriate. The decorative hardware and moldings classification places it in the role of visible cabinet hardware rather than concealed fittings, so it serves as both a functional grip and a design element. Its polished nickel finish coordinates with other polished nickel pieces, which supports a unified look across a full run of cabinets. The zinc die cast construction means the knob body is formed from a metal casting, giving it a uniform shape that repeats cleanly from cabinet to cabinet.
The 1-1/4 inch width and diameter help this knob sit proportionally on many face-frame and frameless cabinet fronts, providing a clear grab point without dominating narrow rails. A projection of 1-5/16 inch holds the gripping surface out from the door or drawer front, which is useful when fingers approach from the side on adjacent cabinets. The 11/16 inch base concentrates visual detail at the point where the knob meets the surface, so it aligns neatly with common drilling patterns and stile widths in residential and commercial cabinetry.
The 8-32 screw size specification anchors this knob to a widely used cabinet thread standard, which supports consistent mounting across multiple doors and drawers using the same drilling and tapping practice. A 1 inch screw length pairs with this knob design to engage through typical cabinet front thicknesses while leaving the knob seated firmly against the face. Because the knob relies on a single centered 8-32 connection, installers can tie it directly into existing 8-32 bore locations when matching or updating hardware across a project.
The defined 1-1/4 inch diameter, 1-5/16 inch projection, and 11/16 inch base give installers predictable clearances when laying out hardware relative to edges, rails, and adjacent fronts. Those dimensions help position the knob so doors and drawers open comfortably without crowding neighboring hardware. The use of zinc die cast material supports uniform threading engagement at the connection point, so the knob seats squarely against the surface when tightened to the door or drawer front.
The Berenson Designers Group Ten knob has a 1-1/4 inch diameter head, giving a defined gripping area suitable for typical cabinet doors and drawers.
The knob has a 1-5/16 inch projection, positioning the grip away from the cabinet face so fingers clear the surface during normal operation.
The knob is made from zinc die cast material, providing a solid metal casting that supports consistent shape and feel across multiple pieces.
The Berenson cabinet knob uses an 8-32 screw size connection, matching a common cabinet hardware thread standard for doors and drawers.
The 4150-1014-P knob has an 11/16 inch base, focusing contact around the mounting point for a clean, compact footprint on the cabinet face.
The Berenson Designers Group Ten polished nickel knob is 1-1/4 inch wide, matching its diameter for a balanced, round profile on the cabinet.
The Berenson Designers Group Ten Series polished nickel 1-1/4 inch diameter knob pairs a zinc die cast body with a defined 1-5/16 inch projection, giving cabinets a consistent grip point and finish. With its 8-32 screw interface and 11/16 inch base, this 4150-1014-P knob aligns with common cabinet drilling and mounting practices. For projects calling for polished nickel decorative hardware across doors and drawers, this knob offers a matched size, finish, and connection standard from a single part number.
Sold In: 1 Each
