Berenson Designers Group Ten Series Polished Nickel 12" (305 mm) Center to Center Appliance Pull, -2036-1014-P

Berenson Designers Group Ten Appliance Pull Use

Berenson Designers Group Ten appliance pull gives you a 12 inch center to center grip span, so it bridges wider appliance panels and tall doors cleanly while keeping handle layout consistent with other 12 inch drilling patterns in the project. The pull measures 13-3/8 inches in overall length, which leaves some metal beyond the mounting points for a balanced look on larger fronts. A projection of 1-13/16 inches creates hand clearance from the panel surface, supporting a full, comfortable grasp when opening heavy appliance doors. The 3/4 inch width provides a substantial feel without crowding the panel face, helping pulls line up neatly on modern cabinetry. This pull is part of the Designers Group 10 collection, so it aligns visually with other pieces from the same series on a coordinated job. It is manufactured by Berenson Corporation as model 2036-1014-P, giving you a clear reference when matching existing hardware.

Key Details That Support Everyday Use

• The 12 inch center to center drilling aligns with common appliance and tall door layouts, so hole locations can follow standard spacing across a bank of fronts for a unified appearance on cabinets and panels.
• The 13-3/8 inch overall length extends slightly beyond the mounting points, giving more visual weight on large surfaces and helping the pull appear proportional on wider appliance doors.
• A 1-13/16 inch projection holds the gripping area away from the surface, which supports easier reach for fingers and minimizes hand contact with finished panels during repeated openings.
• The 3/4 inch width offers a solid gripping bar, giving users a defined edge to pull against when operating heavier appliance doors or large pantry fronts in daily use.
• The polished nickel finish presents a bright metallic surface, allowing this pull to coordinate with other polished nickel decorative hardware elements throughout a kitchen or similar installation.
• The zinc material provides a metal construction, so the pull delivers a rigid feel in hand, suitable for installation where a metal handle body is preferred on cabinets and appliances.

Appliance Pull Sizing And Mount Layout

This appliance pull has a 12 inch center to center dimension, so hole spacing is fixed for that distance when drilling through doors or appliance panels. The overall 13-3/8 inch length means the bar extends past the screw holes, which helps with visual alignment when centering the pull on wider faces. A projection of 1-13/16 inches sets the bar forward from the surface, creating working room between hand and panel during use. With a width of 3/4 inch, the pull occupies a modest strip of space, which can be useful when hardware positions must clear panel edges, trim, or neighboring fronts in tight runs.

Using This Pull On Cabinets And Appliances

Where This 12 Inch Appliance Pull Fits

This pull is classified under appliance pulls, so it is designed for applications where a larger handle is preferred, such as appliance fronts or sizable cabinet doors. The 12 inch center to center mounting dimension suits layouts where longer hardware is desired across the panel face, matching drilling patterns used on similar tall doors. Its 13-3/8 inch overall length adds presence on wider fronts, which can help hardware look scaled to full-height units. Being part of the Designers Group 10 collection, it visually coordinates with other Designers Group 10 pieces, supporting a unified hardware story on a single job where multiple handle sizes are needed.

Details That Support Consistent Results

The fixed 12 inch center to center spacing on this Berenson Designers Group Ten appliance pull allows repeatable hole placement across multiple doors, helping installers maintain straight, even runs of hardware on upper, base, and appliance fronts. The 1-13/16 inch projection establishes a predictable stand-off from the surface, which can be used when aligning pulls relative to door edges or adjacent handles. The 3/4 inch width offers a consistent bar dimension, aiding in visual alignment when mixing this pull with other Designers Group 10 pieces on the same elevation. Constructed from zinc with a polished nickel finish, the pull combines a metal core with a bright surface, supporting a coordinated look when paired with other polished nickel decorative hardware and helping projects maintain a single finish specification.

Common Questions About This Berenson Appliance Pull

Selecting This Pull For Your Next Install

The Berenson Designers Group Ten appliance pull combines a 12 inch center to center layout, 13-3/8 inch overall length, and 1-13/16 inch projection to suit larger doors and appliance panels. Its zinc construction with polished nickel finish aligns with the Designers Group 10 collection, supporting coordinated hardware selections across a project. For work that calls for a longer pull with defined dimensions and a bright polished nickel appearance, this 2036-1014-P model from Wurth Baer Supply offers a clearly specified option.