Pro Value Select Series 3" (76 mm) Center to Center Oil Rubbed Bronze Pull, - SZSE3-ORB

Select Series 3 Inch Cabinet Pull Use

Select Series 3 inch cabinet pull is a zinc die cast handle in an oil rubbed bronze finish, so it gives cabinets a dark, uniform look while keeping the metal body consistent for repetitive layouts on multiple doors and drawers. The 3 inch center to center dimension sets the screw hole spacing, which matters when matching existing drilling patterns on cabinet fronts during replacements or new installations. The overall 3-1/4 inch length provides a little extra grip area beyond the hole spacing, which helps hands locate the pull easily on smaller fronts. The 1-1/4 inch projection sets how far the pull stands off the surface, leaving finger clearance between the handle and the cabinet face. The 1/2 inch width defines the front profile, which keeps the pull visually slim while still giving a defined edge to grab in tight kitchen or shop layouts.

Key Details That Support Daily Cabinet Use

• The zinc die cast material keeps the pull body consistent from piece to piece, which supports uniform alignment and feel across a whole run of cabinets.
• The oil rubbed bronze finish covers the visible surfaces, so the pull presents a dark, traditional tone that coordinates with other bronze-colored decorative hardware.
• The 3 inch center to center measurement fixes the mounting hole distance, which is important when lining up with standard cabinet boring patterns or replacing older 3 inch pulls.
• The 3-1/4 inch overall length extends beyond the mounting points, which gives fingers more contact area along the handle when opening heavier doors or drawers.
• The 1-1/4 inch projection determines stand-off from the cabinet face, which provides finger space behind the pull while keeping the handle compact on shallower fronts.
• The 1/2 inch width sets a relatively narrow front profile, which helps the pull sit neatly on smaller drawer fronts without crowding adjacent hardware.

Cabinet Pull Mounting Dimensions And Fit

The 3 inch center to center drilling on this Pro Value Select Series pull defines exactly where mounting holes land, so installers can lay out or reuse a standard 76 mm pattern on cabinet doors and drawers. The 3-1/4 inch overall length then frames that pattern with a slight overhang at each end, which visually balances the hardware on narrow fronts and keeps the handle from feeling undersized. With a 1-1/4 inch projection off the face, the pull offers enough clearance for fingers to wrap behind the grip, which matters when operating doors near face frames or adjacent appliances. The 1/2 inch width keeps the pull streamlined relative to its mounting spread, helping it sit cleanly on rails and drawer heads without overlapping trim or neighboring pulls.

Using This Oil Rubbed Bronze Pull In Projects

Where This 3 Inch Center Pull Fits Best

This oil rubbed bronze cabinet pull with a 3 inch center to center layout fits projects built around standard 76 mm boring, so it works on many kitchen, bath, or shop cabinets drilled to that spacing. The 3-1/4 inch overall length suits smaller and medium drawer fronts, giving enough handle presence without overwhelming tight rail heights. Its 1-1/4 inch projection creates working room for fingers on face-frame or frameless construction, which helps when cabinets sit next to walls or tall panels. The 1/2 inch width lets the pull sit comfortably on narrow stiles, so installers can place it on doors with limited flat area. The zinc die cast construction keeps each pull dimensionally consistent, which supports straight sight lines when several handles are installed in a row across upper or lower cabinets.

Why These Dimensions Support Repeatable Results

The defined 3 inch center to center spacing on this SZSE3-ORB cabinet handle simplifies layout because the drilling dimension is fixed and standard, which reduces measuring variation from cabinet to cabinet. The 3-1/4 inch overall length leaves only a small extension beyond the screw points, so installers can position the pull close to edges on narrow rails while still keeping the ends clear of corners. With a 1-1/4 inch projection, the pull stands off far enough to grip without fingers hitting the door surface, which can help doors and drawers open smoothly even when hands are gloved. The 1/2 inch width means the pull occupies a modest footprint, easing alignment with other decorative hardware elements along a run. The oil rubbed bronze finish keeps the visible surfaces consistent in color, which supports uniform appearance when many pulls are aligned across cabinets.

Common Questions About The SZSE3-ORB Cabinet Pull

Select This Pull For 3 Inch Cabinet Layouts

The Pro Value Select Series 3 inch center to center oil rubbed bronze pull combines zinc die cast construction with a defined 3 inch drilling pattern, so it aligns well with standard cabinet layouts. Its 3-1/4 inch length, 1-1/4 inch projection, and 1/2 inch width work together to provide comfortable grip in a compact footprint. For projects calling for a dark oil rubbed bronze finish on a consistent 3 inch spread, this SZSE3-ORB cabinet handle offers a straightforward match for doors and drawers.