Pro Value Select Series 3" (76 mm) Center to Center Weathered Nickel Pull, - SZSE3-WN

3 Inch Center To Center Pull For Cabinets

3 inch center to center pull describes this Pro Value Select Series handle, which uses 3 inch (76 mm) screw spacing so it fits drilled cabinet or drawer fronts designed for that standard, giving installers a straightforward replacement or new install layout.

The weathered nickel finish on this pull provides a muted, aged metal look that suits many cabinet styles, so it works for both traditional and transitional projects where a softer metallic tone is preferred over bright finishes.

This pull is made from zinc die cast material, which supports consistent shaping of the 3-1/4 inch overall length and 1/2 inch width, helping create a uniform appearance across multiple doors and drawers in a run.

A 1-1/4 inch projection brings the grip away from the cabinet face, giving fingers room to grab while keeping the handle close enough to the surface for a tidy, low-profile installation on doors or drawers.

Weathered Nickel Cabinet Pull Details That Matter

• The 3-1/4 inch length provides a compact footprint around the 3 inch center to center mounts, which helps when laying out hardware on narrower drawer fronts or smaller doors without crowding adjacent elements.
• The 1/2 inch width keeps the pull slim, so it sits lightly on the cabinet face while still defining a clear line for the hand to land, useful for maintaining a clean visual across banks of drawers.
• The weathered nickel finish offers a consistent toned surface across each pull, supporting visual continuity from door to door when multiple units are installed in the same kitchen, bath, or casework project.
• The zinc die cast construction allows the mounting posts and gripping area to be formed as a single body, which helps maintain alignment between the screw holes and the gripping surface during cabinet hardware layout.
• The 3 inch center to center measurement aligns with a common drilling standard, which streamlines template use and speeds up repetitive installations on multiple cabinet faces.

Installation Dimensions And Mounting Fit

This pull uses a 3 inch center to center measurement, meaning the two mounting holes on the cabinet or drawer front are spaced 3 inches apart, so existing 3 inch layouts or templates match directly.

With a 1-1/4 inch projection, the pull stands out from the surface enough for fingers to wrap behind the bar, supporting comfortable use on both drawers that see frequent opening and doors that need a solid handhold.

The 3-1/4 inch overall length gives a slight overhang beyond the screw centers, allowing the ends to visually frame the mounting points while still fitting easily on modest drawer fronts or narrow stile widths.

A width of 1/2 inch creates a narrow front profile, so the pull reads as a light line on the cabinet face, which helps when a design calls for understated hardware that does not dominate the door style.

Using This Pro Value Select Series Pull In Projects

Where This Cabinet Pull Works Best

The Pro Value Select Series 3 inch center to center weathered nickel pull fits cabinet and drawer fronts that are laid out for 3 inch screw spacing, supporting use in kitchens, baths, and built-ins that follow this common standard.

Its weathered nickel finish pairs well with wood tones and painted surfaces, so it can be used across upper cabinets, base cabinets, and drawer stacks where a unified but softened metal look is desired.

The compact 3-1/4 inch length suits smaller drawers or narrower doors, helping maintain balanced proportions on face frames or frameless fronts without extending too close to panel edges.

Because the pull is part of the Select Series from Pro Value Series, it integrates into hardware selections that call for this specific style identity across a room or project, aiding visual consistency.

Dimensions That Support Repeatable Results

The defined 3 inch center to center measurement lets installers rely on standard jigs and drilling patterns, which supports repeatable hole placement from one cabinet front to the next.

The 1-1/4 inch projection determines how far the gripping point stands from the face, influencing user comfort on frequently used drawers and allowing enough clearance for fingers without excessive stand-off.

At 3-1/4 inches overall length, the pull gives just enough bar beyond the mounting points to grab from either side, helping users catch the handle easily when approaching from different angles.

The 1/2 inch width shapes the front face into a slim bar, which helps align multiple pulls in straight visual lines along drawer banks, supporting a clean, professional cabinet presentation.

The zinc die cast material supports consistent duplication of these dimensions across each SZSE3-WN cabinet pull, so every installed piece lines up in size and shape throughout the run.

The specific SZSE3-WN designation identifies this exact combination of Select Series style, weathered nickel finish, and 3 inch center to center spacing, which simplifies reorders or matching during later project phases.

Common Questions About SZSE3-WN Cabinet Pull

Select This Pull For 3 Inch Layouts

The Pro Value Select Series SZSE3-WN zinc die cast pull combines a 3 inch center to center layout, 3-1/4 inch overall length, and 1-1/4 inch projection to suit standard cabinet drilling patterns and everyday use.

Its weathered nickel finish and 1/2 inch slim width support understated, coordinated hardware runs across cabinets and drawers, making this 3 inch center to center pull a practical choice for projects using this spacing.