Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Select Series 3 inch cup pull describes a zinc die cast handle with a 3 inch center to center drill span, so it lines up with standard cabinet hole spacing on many jobs and speeds straightforward pull changes. The oil rubbed bronze finish defines the pull's dark-toned appearance, so it visually matches other oil rubbed bronze decorative hardware in a run of cabinets. The cup pull form with a 1 inch projection sets how far the grip stands off the door or drawer front, giving fingers room to catch the pull without feeling bulky. A 1-3/4 inch width establishes the front face height, so you know how much vertical space it occupies on narrow rails. The overall 3-1/2 inch length shows how much linear space this handle covers, which helps plan layout on drawer fronts or paired installations.
The 3 inch center to center spacing on this Pro Value Series cup pull dictates drill locations, so new fronts can be bored accurately or existing 3 inch bores can be reused for a quick swap. The 3-1/2 inch overall length defines end-to-end coverage, which assists in centering the pull on drawer fronts or aligning multiple pulls in a row. The specified 1 inch projection establishes how far the grip stands off the surface, guiding clearance planning near adjacent doors, appliances, or tight walkways. A 1-3/4 inch width defines vertical real estate on the rail, which is useful when setting pulls on narrower face frames or balancing proportions on taller drawer fronts.
The SAP description "SELECT PULL 3'CC OIL RUBBED BRONZE" and part number SZSE9-ORB identify this pull as a 3 inch center to center option in an oil rubbed bronze finish, which fits projects built around that specific spacing and color tone. As a Pro Value Series product in the Handles and Pulls category, it is intended for cabinet and drawer use where a cup pull shape is preferred over a knob. The 3-1/2 inch length and 1-3/4 inch width give it proportions suited to both smaller cabinet doors and many standard drawers, allowing a consistent look across upper and lower runs. With a 1 inch projection, the grip depth works on face frame cabinets and frameless fronts where moderate stand-off is desirable without projecting excessively into use areas. The oil rubbed bronze finish also supports coordinated layouts that tie in matching hinges or other decorative hardware with a similar dark appearance.
The defined 3 inch center to center drilling dimension on this zinc die cast cup pull supports repeatable measuring across multiple cabinet fronts, helping installers replicate handle placement from one door or drawer to the next. The 3-1/2 inch overall length and 1-3/4 inch width give fixed reference edges, which helps when using templates or jigs that key off the pull's ends or centerline for alignment. The 1 inch projection determines how fingers meet the underside of the cup, contributing to a consistent grab feel across every front in the run. Because the pull is zinc die cast, each piece follows the same molded profile, which helps maintain uniform sight lines when many pulls are mounted side by side. The oil rubbed bronze finish ensures that when multiple SZSE9-ORB pulls are specified, they share the same finish family for a continuous visual band along cabinet banks.
This SZSE9-ORB cup pull uses a 3 inch center to center spacing, which sets the distance between mounting holes and suits layouts based on that standard drill pattern.
The Pro Value Select Series 3 inch cup pull has a 3-1/2 inch overall length, so it covers that amount of linear space on a door or drawer front.
This oil rubbed bronze cup pull has a 1 inch projection, setting how far it stands off the surface and how much finger clearance is available behind the grip.
This cabinet cup pull has a 1-3/4 inch width, which defines the vertical face height visible on the cabinet rail or drawer front.
The Pro Value Series SZSE9-ORB cup pull is made from zinc die cast material, giving a molded metal construction with consistent shape from piece to piece.
This Pro Value Series cup pull is specified with 8-32 x 1 inch screw size, which defines the thread and length used to secure the pull to cabinet fronts.
This Pro Value Select Series 3 inch cup pull combines a 3 inch center to center drill pattern with a 3-1/2 inch overall length, fitting cabinets designed around that spacing. The oil rubbed bronze finish aligns with dark-toned decorative hardware schemes, supporting cohesive runs. With defined dimensions for projection and width, this zinc die cast pull gives installers clear layout and clearance information for cabinet and drawer projects that specify the SZSE9-ORB part.
Sold In: 1 Each
