Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 1-7/8"x3-1/4" wire grommet identifies this Hardware Concepts, Inc. rectangular plastic grommet as sized for a 1-7/8 inch by 3-1/4 inch opening, which sets a predictable cutout when routing or machining desk and counter tops for cable pass-through. The product is part of the Rectangular Wire Grommets Two Piece & Three Piece Plastic line, so it integrates into projects that need a coordinated appearance across different cable locations. Being a grommet within the Shelf, Closet & Garage Organization and Multimedia and Workspace Components category means it is intended to manage wires where surfaces meet electronics or storage systems, helping control clutter at the work surface. The Manufacturer Part # 6371-029 ties directly to shop documentation and reordering, so installers can match the same component across multiple jobs or phases without re-specifying the part.
The web description explains that all grommets in this family may be used individually for desk and counter tops, so fabricators can cut the 1-7/8 inch by 3-1/4 inch opening and drop this plastic unit into place as part of their standard machining workflow. This same description notes that models PL6371, PL6372, and PL6373 will match and insert into PL6376, PL6377, and PL6378 in any combination to create a telescoping grommet for partitions, which allows installers to pair components across both sides of a partition when routing cables between spaces. Because the part is categorized under Multimedia and Workspace Components, it fits naturally into layouts that bring power, data, and AV cabling through worktops without open, unfinished cutouts.
The product description states that all grommets in this group may be used individually for desk and counter tops, so fabricators can treat the 2PC 1-7/8"x3-1/4" wire grommet as a standard opening detail during CNC or jig-based routing. That same description specifies that PL6371, PL6372, and PL6373 will match and insert into PL6376, PL6377, and PL6378 in any combination to create the telescoping grommet for partitions, so installers working on office dividers or similar partitions can route cables through both faces using matched components. Because the product name highlights a rectangular wire grommet in plastic, it suits modern work surfaces where square-edged equipment and channel layouts are common, tying cable routes to the geometry of the furniture or fixture.
The availability of two cap types, as stated in the web description, means installers can standardize on either edge-hinged tabs or center-hinged tabs depending on how cables approach the opening, which simplifies repeating the same layout across multiple stations. The cap with two independent hinged tabs on the edge of the cap supports runs where cords need to exit toward a panel side, helping align cables to walls, modesty panels, or under-desk raceways. The cap with two independent hinged tabs in the middle of the cap serves situations where cables drop cleanly from devices above the opening, which can clarify separation between power, data, or AV lines in the center of a work zone. The note that PL6371, PL6372, and PL6373 will match and insert into PL6376, PL6377, and PL6378 in any combination to create the telescoping grommet for partitions lets project planners coordinate parts for the near and far faces of a partition, helping maintain consistent cable paths through thicker structures.
Hardware Concepts 6371-029 is a rectangular plastic wire grommet from the Two Piece & Three Piece Plastic range, so it finishes cable pass-through openings in work surfaces.
The web description notes that all grommets may be used individually for desk and counter tops, so this part suits work surfaces that need organized cable routing.
The product description explains that one cap has edge hinged tabs and one has center hinged tabs, so installers can match the tab position to the desired cable exit path.
The web note states that PL6371, PL6372, and PL6373 match and insert into PL6376, PL6377, and PL6378 to create a telescoping grommet for partitions, enabling partition cable runs.
The SAP description 2PC 1-7/8"x3-1/4" wire grommet ALM indicates a two-piece rectangular grommet sized around a 1-7/8 by 3-1/4 inch opening.
The product name identifies a plastic wire grommet, which creates a finished edge at cable cutouts on desks and counters while matching other plastic workspace components.
The Hardware Concepts, Inc. 6371-029 rectangular plastic wire grommet combines a defined 2PC 1-7/8"x3-1/4" opening with two available cap styles, so you can align cable exits with real workspace layouts. Its ability to be used individually for desk and counter tops, as stated in the description, suits straightforward surface machining on new builds or retrofits. The noted match with PL6376, PL6377, and PL6378 to create a telescoping grommet for partitions extends that same part family into partition runs. For organized cable management across desks, counters, and partitions using documented part numbers, this wire grommet provides a consistent component choice.
Sold In: 1 Each
