
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
2PC 1-7/8X3-1/4 wire grommet identifies this Hardware Concepts, Inc. plastic grommet as a rectangular opening solution sized for typical wire pass-through in desks and counters, so installers can match the cutout to the defined footprint with confidence. The product belongs to the Grommets product class and sits in the Multimedia and Workspace Components category, which positions it for organizing cables where power, data, or multimedia leads need a clean exit from a surface. Two cap types are available: one cap with two independent hinged tabs on the edge and another cap with two independent hinged tabs in the middle, giving flexibility in how cables pivot as they leave the opening. All grommets may be used individually for desk and counter tops, so a single opening can be finished neatly without requiring any partition system.
The SAP description "2PC 1-7/8'X3-1/4 WIRE GROMMET ALM" signals a two-piece rectangular layout sized at 1-7/8 inch by 3-1/4 inch, giving casework installers clear dimensions for routing or machining the opening. Because all grommets may be used individually for desk and counter tops, the installer can align the cutout directly over cable chase locations in the substrate and know the grommet will finish the edge. The telescoping grommet compatibility between PL6371, PL6372, PL6373 and PL6376, PL6377, PL6378 for partitions shows that this sizing participates in a coordinated family, which simplifies planning when surfaces and partitions share cable paths.
The product is described as Rectangular Wire Grommets Two Piece & Three Piece Plastic, placing it in applications where wires pass through furniture and architectural elements rather than open cable trays. All grommets may be used individually for desk and counter tops, so they suit office desks, counters, and similar horizontal work surfaces that need a finished cable pass-through instead of an unfinished hole. The grommet sits within the Shelf, Closet & Garage Organization and Multimedia and Workspace Components categories, which aligns it with storage walls, workstations, and multimedia furniture where cords should route through a controlled opening. Because the same family of parts can create a telescoping grommet for partitions when PL6371, PL6372, or PL6373 match and insert into PL6376, PL6377, or PL6378, this rectangular size helps bridge cable pathways from furniture surfaces into partition systems in coordinated projects.
The presence of two cap types - one with two independent hinged tabs on the edge and another with two independent hinged tabs in the middle of the cap - lets installers choose how the cables bend as they exit, which can reduce strain on cords and help maintain straighter runs to devices. Independent hinged tabs on the cap give controlled openings sized to the actual cable bundle, which helps limit the visible opening while still allowing movement during service work or reconfiguration. The ability of PL6371, PL6372, and PL6373 to match and insert into PL6376, PL6377, and PL6378 in any combination to create the telescoping grommet for partitions means this design participates in a modular system, so the same opening geometry can be extended through thicker partition builds without changing the visible trim. The specified 2PC 1-7/8'X3-1/4 WIRE GROMMET ALM size provides a known footprint, which helps CNC programmers and millworkers standardize tooling paths and reduce layout variation between jobs.
The rectangular wire grommet is used for desk and counter tops, so it suits work surfaces where cables need to pass cleanly through a finished opening.
The grommet offers one cap with hinged tabs on the edge and another with hinged tabs in the middle, allowing cables to exit closer to the cap edge or from the center as layouts require.
The 2PC 1-7/8X3-1/4 description indicates a two-piece plastic grommet sized around a 1-7/8 inch by 3-1/4 inch rectangular opening for routing or machining.
The PL6372 model matches and inserts with PL6376, PL6377, and PL6378 as part of a telescoping grommet for partitions, linking surface openings to partition runs.
The grommet is part of the PL6371, PL6372, PL6373 group that matches with PL6376, PL6377, and PL6378, forming a coordinated telescoping grommet family.
The 6372-029 wire grommet is manufactured by Hardware Concepts, Inc., giving specifiers a defined brand and part number to call out on drawings.
The 2PC 1-7/8X3-1/4 wire grommet from Hardware Concepts, Inc. combines a defined rectangular size, two cap styles with independent hinged tabs, and compatibility with a telescoping partition grommet family. Those verified details support installers who need consistent openings across desks, counters, and partitions while keeping cable exits organized. Use this specific 6372-029 part number when a plastic rectangular wire grommet is required across multimedia and workspace components.
Sold In: 1 Each