Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 1-7/8"X3-1/4 wire grommet gray describes a rectangular plastic grommet sized for a 1-7/8 inch by 3-1/4 inch opening, which routes wires through desks or counter tops, keeping cable penetrations organized and visually controlled. The product is identified by manufacturer part 6372-021 from Hardware Concepts, Inc., so installers can match it directly to drawings or replacement schedules on commercial jobs. This grommet is part of the Hardware Concepts plastic rectangular wire grommet family, which aligns with multimedia and workspace components where multiple conductors pass through a surface. The gray color supports neutral office and workspace layouts, helping wire passes blend with typical laminate or painted surfaces. Because the product is classified as a grommet for desk and counter top use, it suits workstation build-outs, reception counters, and shop benches where cords or low-voltage cables need a defined, protected pass-through point.
The 2PC 1-7/8"X3-1/4 wire grommet gray sizing indicates a rectangular opening of 1-7/8 inch by 3-1/4 inch, which aligns with common cutout sizes in work surfaces and counters for managing power and data leads. Being a two-piece plastic design means there is a cap and liner relationship, so the liner seats in the cutout while the cap manages the visible opening and cable exit, giving a cleaner finished edge around the hole. Hardware Concepts lists all grommets in this family as usable individually for desk and counter tops, which supports straightforward installation in a single surface where only one side needs finishing. The rectangular footprint fits multimedia and workspace layouts that carry multiple power cords or low-voltage cables through one opening, helping avoid multiple small holes in the same area of a top.
The Hardware Concepts, Inc. 6372-021 rectangular wire grommet belongs to the multimedia and workspace components category, so it suits office furniture, counters, and workstations where equipment cables must pass through horizontal panels. The classification under shelf, closet and garage organization indicates it also suits storage or utility benches where power strips and chargers sit on a surface but feed to outlets below. Because all grommets in this group may be used individually for desk and counter tops, the 6372-021 part fits single-surface applications such as reception counters, conference tables, and shop tables. The rectangular 1-7/8 inch by 3-1/4 inch format offers a wider cable corridor than a small round opening, supporting several cords or low-voltage lines through one organized pass point. Since PL6372 grommets will match and insert into PL6376, PL6377, and PL6378 in any combination, this part also plays into partition runs where the opening must telescope through the thickness of a panel for a cleaner edge on both faces.
The two cap types with independent hinged tabs give flexibility in how cables leave the grommet, which affects both appearance and cable stress in day-to-day use. When the cap uses hinged tabs on the edge, cables can follow the panel edge toward a leg or support, reducing clutter on the work surface and creating a clear path toward vertical cable management. When the cap uses hinged tabs in the middle, cables can drop straight toward floor or under-desk pathways, which is useful where devices sit near the center of the cutout or when routing bundles directly downward. The telescoping compatibility, where PL6372 grommets match and insert into PL6376, PL6377, and PL6378, lets installers treat the grommet as part of a deeper assembly through partition walls, keeping cable edges protected across the full thickness. This matching capability supports consistent visual alignment from one side of the partition to the other, which is valuable when building coordinated office or workstation fronts. All grommets being suitable for individual desk and counter top use also means the same basic part can serve both simple surfaces and more involved partition telescoping assemblies within one project, helping maintain continuity in appearance across different furniture elements.
The 2PC 1-7/8"X3-1/4 wire grommet gray designation describes a two-piece gray plastic rectangular grommet sized for a 1-7/8 inch by 3-1/4 inch wire opening in a work surface.
The Hardware Concepts 6372-021 grommet is listed for individual use in desk and counter tops, so it fits office furniture, counters, and similar work surfaces carrying power or data cables.
The two hinged tab cap styles let cables exit from either the edge or the middle of the cap, which helps match cable direction to the furniture layout and reduces awkward bends.
PL6372 grommets will match and insert into PL6376, PL6377, and PL6378 in any combination, allowing telescoping grommet assemblies through partition panels.
This rectangular grommet may be used individually for desk and counter tops, so it suits single-surface openings where only one side of the panel needs finishing.
The 6372-021 plastic wire grommet is manufactured by Hardware Concepts, Inc., providing a defined part number for matching to plans or existing installations.
The Hardware Concepts, Inc. 2PC 1-7/8"X3-1/4 wire grommet gray combines a sized rectangular opening, two-piece cap-and-liner construction, and hinged tab cap options to manage cable exits cleanly in desks, counters, and partitions. Its ability to be used individually in desk and counter tops, along with matching and inserting into PL6376, PL6377, and PL6378 for telescoping assemblies, gives flexibility across standard work surfaces and partition panels. For projects needing a gray rectangular wire pass-through that aligns with the 6372-021 specification, this grommet offers a defined solution you can match to your planned cutouts.
Sold In: 1 Each
