2PC Round Economy Grommet White For Wire Pass

2PC 1-7/8 round economy grommet white is a two piece plastic round wire grommet from Hardware Concepts, Inc. that manages cables through a 1-7/8 inch bore hole, so wires pass cleanly through desks, shelves, and work surfaces. The product is part of the Round Wire Grommets line covering four bore hole sizes from 1-7/8 inch to 2-1/2 inch diameter, tying this part to typical multimedia and workspace openings. The cap has a permanent wire hole cutout, so the opening stays consistent once installed and keeps cables routed in a fixed path. The liner provides a 5/8 inch depth, giving the bore hole edge a defined sleeve that shields wire jackets as they move through the surface. This economy design in white plastic suits shelf, closet, and garage organization layouts where functional cable pass-through and a simple finished look are the priority.

Verified Grommet Details That Support Daily Use

• The two piece plastic design uses a separate cap and liner, so the liner seats in the bore hole while the cap finishes the surface, which helps keep the edge covered during routing work.
• Four bore hole sizes from 1-7/8 inch to 2-1/2 inch diameter are available in the Round Wire Grommets line, so installers can match openings across different desks or panels while using the same family.
• The cap has a permanent wire hole cutout, guiding cables through a fixed opening that keeps the wires grouped and reduces stray movement at the work surface.
• The liner depth is 5/8 inch, creating a defined sleeve along the hole wall that helps protect wire jackets where they contact the substrate.
• Two colors with smooth and textured finishes are available in this series, giving layout options to align the visible cap with other hardware or surface materials.

Round Wire Grommet Fit And Bore Hole Details

This two piece plastic round wire grommet is specified for a 1-7/8 inch bore hole within a range that covers four hole sizes up to 2-1/2 inch diameter, so installers can select this specific part when the opening matches that cut size. The liner depth of 5/8 inch defines how far the sleeve extends into the hole, which matters when working with shelving, desktop, or panel thicknesses near that dimension. The permanent wire hole cutout in the cap sets the pass-through opening once the cap is seated, so cable bundles follow a controlled path instead of spreading across the edge of the bore hole. As part of a grommet category focused on shelf, closet, and garage organization, this setup supports cable routing in multimedia and workspace components that rely on round pass-through holes.

Using This Hardware Concepts 6727-010 Grommet

Where This Two Piece Plastic Grommet Fits

This Hardware Concepts, Inc. 6727-010 round wire grommet is classified under multimedia and workspace components as well as shelf, closet, and garage organization, so it fits applications where cables need to pass through flat panels like desks, shelving, or cabinet tops. The specified 1-7/8 inch bore hole size places it in common cutout dimensions used for computer, power, or device wiring in work surfaces and built-in storage. The 5/8 inch liner depth works with many panel thicknesses found in closet systems and workspace furniture, because the sleeve occupies a controlled portion of the hole edge. Being an economy two piece plastic design, it suits cost-sensitive runs where maintaining a neat cable opening and basic edge protection matters more than decorative detailing.

Details That Support Repeatable Cable Pass-Through

The two piece construction, with cap and liner sold together, creates a consistent interface once installed, because the liner stabilizes in the 1-7/8 inch bore hole while the cap with permanent wire hole cutout snaps over it. That relationship keeps the cable opening in the same relative position, which supports repeatable layouts when several grommets are placed across a row of workstations or shelves. The 5/8 inch liner depth defines how the edge of the substrate contacts the grommet, helping reduce abrasion at the contact point when cables are moved or adjusted during equipment changes. With four hole sizes available from 1-7/8 inch to 2-1/2 inch diameter across the Round Wire Grommets line, planners can standardize on this style while selecting the bore size that matches each cutout. Two colors with smooth and textured finishes in the series allow visual coordination with existing closet systems or desk surfaces, maintaining a consistent appearance around each cable opening.

Common Questions About This Round Wire Grommet

Selecting This Grommet For Your Next Layout

This 2PC 1-7/8 round economy grommet white from Hardware Concepts, Inc. pairs a 1-7/8 inch bore hole fit with a 5/8 inch liner depth and a permanent wire hole cutout, giving installers a defined way to finish and protect cable pass-through points in shelves, closets, and workspace surfaces.