2-Piece Economy Wire Grommet For Clean Runs

2-piece economy wire grommet black gives a simple way to finish wire pass-throughs, so cutouts around desks or work surfaces look neat and protected. This Hardware Concepts, Inc. 6730 2-1/2 inch 2-piece economy wire grommet uses a two-part cap and liner design, which lets the liner sit in the hole while the cap finishes the top surface. The round grommet format suits typical drilled openings in shelves, closets, garages, and multimedia work areas, so one part number can support multiple project types. The cap has a permanent wire hole cutout that keeps the opening consistent, which helps route cables in a repeatable way from one installation to the next. The black finish matches many standard work surfaces, which helps the grommet blend into common cabinetry and workspace layouts.

Practical Details That Support Wire Management

• The four hole sizes available from 1-7/8 to 2-1/2 inch diameter mean this grommet family covers common cutout sizes, so installers can match existing openings or plan new ones around a known range.
• The cap has a permanent wire hole cutout that fixes the pass-through opening, so cables follow a defined path that stays consistent after the cap is set into the liner.
• Two colors with smooth and textured finishes available give options for matching work surfaces, so the visible cap can coordinate with different cabinets, desks, or panels.
• The liner depth of 5/8 inch lets the grommet sit down into the material, so the edge of the cutout is covered along its depth rather than only at the top face.
• Cap and liner sold together under this part number keeps the two-piece system matched, so the cap and liner are sized to work correctly as a single assembly in the cutout.

Round Grommet Fit And Cutout Planning

The 2-1/2 inch 2-piece economy wire grommet, black, is part of a four-size range from 1-7/8 to 2-1/2 inch diameter, so layouts can be planned around standard hole saw or boring patterns. The round format fits typical circular cutouts used in multimedia and workspace components, so drilling methods stay straightforward. The 5/8 inch liner depth sets how far the grommet extends into the panel, which helps plan hole placement relative to structural members or shallow cavities. Because this model uses a dedicated liner and cap, the cap seats against the top surface while the liner engages the hole edge, supporting a stable fit in typical shelf, closet, and garage organization panels.

Using This Wire Grommet In Work Surfaces

Where This 2-1/2 Inch Grommet Works Best

This Hardware Concepts, Inc. grommet sits in the Shelf, Closet & Garage Organization and Multimedia and Workspace Components category, so it aligns with projects that bring power or low-voltage wiring through shelves and worktops. The round economy wire grommet format suits cabinet shops and installers working on desks, counters, closet systems, and garage stations where cords exit through panels. The 2-1/2 inch diameter size fits larger wire bundles or heavier-duty cables, which is helpful at workstation hubs or equipment clusters where multiple leads share one opening. With four hole sizes available in the same 6730 grommet family, shop layouts can standardize locations while selecting the specific diameter that matches each cable group. The black finish lets the visible cap sit against dark laminates or painted panels, helping the opening look intentional across a run of cabinets or workstations.

Details That Support Consistent Wire Pass-Throughs

The cap has a permanent wire hole cutout, so once the cap is set in place the cable path is defined and repeatable across jobs using the same part number. That fixed opening helps installers align cable exit points relative to equipment, since the wire always emerges through the same location on the cap. The 5/8 inch liner depth means the grommet engages the material through a measurable distance, which supports a snug fit in typical panel thicknesses used in closets, shelves, and garage systems. Because cap and liner are sold together, the mating pieces stay matched for that depth and diameter, helping the cap index properly to the liner in the cutout. The overall 2-piece design supports a finished top look from the cap while the liner manages the raw edge of the drilled hole underneath, giving a uniform appearance wherever cables pass through.

Key Questions About This Wire Grommet

Selecting This Grommet For Wire Openings

This 2-1/2 inch 2-piece economy wire grommet black from Hardware Concepts, Inc. suits installers working on shelf, closet, garage, and multimedia layouts that need clean wire pass-throughs. With a defined 5/8 inch liner depth, a permanent wire hole cutout, and four hole sizes available across the family, it supports predictable drilling and repeatable cable routes. When a project calls for a round black grommet that pairs a liner and cap for a finished opening, this 6730-014 model from Wurth Baer Supply is a focused option.