2-1/2 Inch Wire Grommet For Clean Cable Runs

2-1/2 inch wire grommet describes a round grommet that manages wires through a work surface, so you can route power and data cables while protecting the edge of the cutout. This Hardware Concepts, Inc. 6730-010 model uses a two-piece cap-and-liner design, which lets the liner sit in the hole while the cap finishes the opening for a neater look on desks or counters. The grommet is part of a multimedia and workspace components group, so it works well where wires need to pass through in a controlled path. A white finish supports light-colored furniture or closet systems, so the opening reads as a finished detail instead of a raw cut.

Economy Grommet Details That Support Daily Use

• The two-piece economy design means a separate cap and liner, so the liner can seat in the cutout while the cap snaps on, creating a stable edge for wires during regular use.
• The cap has a permanent wire hole cutout, guiding cords through a defined opening so cables exit in one direction, which helps keep layouts predictable once installed.
• Four hole sizes are available from 1-7/8 inch to 2-1/2 inch diameter, so the system can match different cutout sizes across a project while keeping a similar visual style.
• Two colors with smooth and textured finishes are available, giving options to match surrounding surfaces or hide soil marks where hands contact the grommet.
• The product is classified under shelf, closet, and garage organization plus multimedia and workspace components, so it fits organizing runs of cable in storage areas as well as at workstations.
• The economy designation reflects a cost-conscious line, which supports use across multiple openings on larger cabinetry or office layouts without overbuilding the part.

Cutout Size And Liner Depth For Straightforward Fit

This 2-1/2 inch round grommet is sized for holes within the 1-7/8 inch to 2-1/2 inch diameter range mentioned for the series, so it targets common drill or hole saw sizes used in panels and tops. The liner depth is 5/8 inch, which means the sleeve drops that distance into the hole and covers the side wall, protecting cable jackets from the panel edge. That 5/8 inch depth suits many typical furniture and cabinet panels where the material thickness is similar, so the liner can sit flush at the surface while extending down enough to shield wires as they move.

Using This 2 Piece Economy Wire Grommet In Projects

Where This Grommet Fits In Work Surfaces

This 2 piece economy wire grommet works within multimedia and workspace components, so it is suited to desktop, countertop, or bench openings where power and data cables need a clean pass-through. Its place in shelf, closet, and garage organization also supports routing low-voltage wiring or power cords through panels in storage installations, helping group cords behind shelving runs. The white finish pairs with light laminate, painted MDF, or melamine closet parts, so the cutout transitions into a simple round detail that visually ties into the panel instead of standing out as a dark opening. Across furniture or built-in work areas, the 2-1/2 inch diameter end of the size range gives enough room for several cords to pass through a single hole.

Why The Two-Piece Design And Liner Depth Matter

The two-piece structure, with a separate cap and liner, allows the liner to occupy the full 5/8 inch depth of the cutout, which shields cable jackets from rough edges as wires slide through over time. Once the liner is seated, the cap with its permanent wire hole cutout focuses the exit point, so cords leave at a consistent angle, reducing sideways rubbing on the panel edge. Having four hole sizes in the same product family simplifies planning when a project uses different top thicknesses or equipment layouts, because openings can be sized to the available grommet diameters while keeping the same series. The availability of two colors with both smooth and textured finishes lets installers visually coordinate the grommet with surrounding materials, which helps maintain a professional, intentional look across office suites or organizing systems.

Common Questions About The 6730 Wire Grommet

Select This Wire Grommet For Organized Cable Pass-Throughs

The Hardware Concepts, Inc. 6730-010 2-1/2 inch wire grommet combines a two-piece cap-and-liner build, a 5/8 inch liner depth, and a white finish to handle cable pass-throughs in work and storage areas. Within multimedia and workspace components and shelf, closet, and garage organization categories, it supports routing cords through panels while keeping the opening shielded and visually finished. For projects calling for a 2-1/2 inch class round cutout solution that balances function with a clean appearance, this economy grommet aligns well with those requirements.