Foldable Steel Table Legs 27-3/4 For Work Surfaces
Foldable Steel Table Legs 27-3/4 describe Camar steel table legs from the Peter Meier Click Series designed to support work surfaces at a 27-3/4 inch table height. Each steel leg has a 2 inch diameter, which provides a solid, compact footprint for typical work tables and benches. The legs are part of a premium line with a load bearing capacity of 220 lb per leg, so four legs can support substantial static loads in workshop or shop-floor environments when distributed properly. The legs are supplied in chrome finish, giving a hard, smooth surface that suits many commercial and shop interiors where a metal leg is preferred. Each leg features built-in folding brackets, so the table structure can be folded down when required without adding separate hinge hardware. The product is sold under manufacturer part number 656-70-C1, which helps align this specific height and design with matching components on repeat projects.
Steel Table Leg Details That Support Daily Use
- The Peter Meier Click Series steel construction provides a rigid table leg structure, so a 220 lb per leg rating can handle heavy loads on work surfaces where tools or materials are routinely placed.
- The 27-3/4 inch leg length sets a standard table height, so tops land in a comfortable working range for many bench, desk, and utility table builds across shop or office environments.
- The 2 inch leg diameter concentrates strength in a compact round profile, so the leg occupies limited footprint while still supporting wide tops used for work, assembly, or staging.
- The chrome finish on the steel surface adds a bright metal look, so tables visually match surrounding hardware or fixtures in commercial, office, or workshop settings using similar finishes.
- The legs are produced by Camar as part of the Click Series, so installers can match this style and capacity when expanding, replacing, or standardizing multiple workstations.
Folding Leg And Foot Adjustment For Straight Setups
Each Camar leg in this Click Series configuration uses an attached folding bracket, so the leg pivots at the mounting point when the release is activated. The folding bracket design incorporates a single button release, which allows the leg to be locked or released without tools during normal operation. A 1-1/8 inch adjustment built into the foot lets installers fine-tune the overall leg height once mounted, which helps align the work surface when floors vary in level from point to point. The published table height of 27-3/4 inches defines the primary working elevation, while the adjustable foot range provides additional flexibility to straighten tops in long runs or corner installations.
How These Camar Legs Fit Real Work Tables
Where These Chrome Steel Legs Are Typically Used
The Camar foldable steel table legs with 27-3/4 inch length and 2 inch diameter are suited to tables that must balance stability with occasional folding. The 220 lb per leg capacity supports uses such as work surfaces in woodworking shops, assembly tables, or utility stations where heavy items rest on the top. The chrome finish gives these legs a clean metal appearance, so they integrate into office or commercial interiors that combine functional worktops with visible hardware. Because the legs establish a set table height, they can be used in runs of matching tables where a consistent working elevation matters across multiple stations. The round profile also works well where people move around the corners, because the smooth 2 inch diameter edge forms a modest visual and physical obstruction under the top.
Why Folding Brackets And 1-1/8 Foot Adjustment Matter
The factory-attached folding brackets mounted to each leg simplify the transition between use and storage positions, since the hinge point is already integrated with the leg body. The single button release on the folding bracket lets the user change leg position quickly, which helps when tables are regularly reconfigured in multi-purpose rooms or production areas. The 1-1/8 inch adjustment range built into each foot provides height tuning for the table after the brackets are fastened under the top, so uneven floors do not force a twist into the work surface. Being able to adjust the foot at the leg rather than altering the top or base allows more consistent results when lining up several tables side by side. Across repeated builds, the fixed 27-3/4 inch nominal height combined with foot adjustment and folding capability supports predictable layouts while still allowing flexibility in room arrangements.
Common Questions About Camar Click Series Chrome Legs
What table height do these Camar legs create?
The Camar foldable steel table legs are made in a 27-3/4 inch length, which sets the table height for work surfaces built with these legs before using the foot adjustment.
How much load can each steel table leg support?
Each table leg in the Peter Meier Click Series has a load bearing capacity of 220 lb per leg, which supports heavier worktops and stored items when weight is distributed.
What adjustment range is built into the table leg foot?
The table leg has 1-1/8 inch adjustment built into the foot, allowing height tuning to compensate for floor variations and align multiple tops in a row.
How do the folding brackets on these legs operate?
The folding bracket on each leg uses a single button release, so the leg can be locked upright or folded down by actuating that button at the bracket location.
What finish is available on this 656-70-C1 table leg set?
This 656-70-C1 configuration uses a chrome finish on the steel legs, which provides a bright metallic look suitable for commercial or workshop environments.
Which manufacturer produces these foldable steel table legs?
These foldable steel table legs are manufactured by Camar as part of Peter Meier's Click Series, providing a consistent style and performance level.
Select Camar Foldable Legs For Consistent Table Height
The Camar foldable steel table legs in chrome finish combine 27-3/4 inch table height, 2 inch diameter construction, and 1-1/8 inch foot adjustment to support functional work surfaces. The 220 lb per leg capacity, integrated folding brackets, and single button release help configure tables that carry real loads yet store compactly. Using the 656-70-C1 model lets projects standardize on a known height, load rating, and appearance across multiple stations or rooms. For work surfaces that must stay level under use and still pivot out of the way when space is repurposed, this Click Series configuration offers a defined, repeatable solution.
