Foldable Steel Table Legs 27-3/4 in Chrome

Foldable Steel Table Legs For Work Surfaces

foldable steel table legs from Camar give a work surface or table a 27-3/4 inch height, so installers can hit a standard table dimension with one steel component. The 2 inch diameter steel construction supports up to 220 lb per leg, which keeps typical worktops or tables steady under load. The leg design belongs to Peter Meier's Click Series, tying it to a premium line that focuses on solid load-bearing performance. Each leg is built with a 1-1/8 inch adjustment range in the foot, so minor height changes can be dialed in at install to fine tune top level. A chrome finish provides a clean, bright look that suits many commercial and shop environments. The product sits in the Work Surface & Tables category as a table leg solution, giving a clear role in supporting tops in woodworking and similar projects. The manufacturer part number 656-7S-C1 identifies this specific chrome, adjustable model.

Key Table Leg Details That Help On Site

• The 27-3/4 inch table height length sets a work surface at a familiar table level, which simplifies planning when matching existing furniture or designing new stations.
• The 2 inch diameter steel tube spreads load over a wider footprint, supporting up to 220 lb per leg for solid stability on finished tops.
• The 1-1/8 inch adjustment built into the foot lets an installer correct slight floor variations, helping keep the table top level without shims.
• The integrated folding bracket allows the leg to pivot, so the table can be collapsed when needed and then locked back into position for use.
• The chrome finish gives the leg a polished appearance that fits visible installations, while tying into other chrome components in the same space.

Installation And Adjustment Details For This Leg

This steel table leg ships at a 27-3/4 inch length, so mounting it under a work surface delivers table-height function without additional extensions. A folding bracket is attached to each leg, which sets the mounting interface at the top of the tube for joining leg and top. The foot at the bottom of the leg contains 1-1/8 inch of built-in adjustment, so once the leg is fastened to the top, the installer can thread the adjustment to reach final height. With a rated capacity of 220 lb per leg, the installer can plan overall table loading by leg count and top span, keeping the layout within the stated load capacity.

Using Camar Click Series Legs In Real Projects

Where These 2 Inch Chrome Table Legs Fit Best

These Camar steel table legs are part of Peter Meier's Click Series, so they are designed as structural supports for tables and work surfaces in woodworking and related environments. The 27-3/4 inch table height layout puts them in the zone for desks, utility tables, and general work tables that need a conventional sitting height. A 2 inch diameter profile makes sense where visual presence and strength both matter, such as open office tables or shop benches that remain visible. The chrome finish ties into applications where metal components are exposed, giving a coordinated look with other chrome hardware in a room or shop. With a load bearing capacity of 220 lb per leg, they can be applied to tops that carry tools, materials, or heavy fixtures, as long as the overall table design respects that per-leg rating. Within the Work Surface & Tables category, this model serves as a primary support element under wood, laminate, or similar tops that match its height and capacity.

Details That Support Consistent Setup And Adjustment

The 1-1/8 inch adjustment built into the foot is central to dialing in consistent table height across multiple units. On a job with uneven floors, the installer can extend or retract that adjustment range so each table leg reaches the same working height without resorting to ad hoc fixes. Because the folding bracket is already attached to the leg, the top connection point is defined by the manufacturer, which helps repeat placement across several tables. The single button release on the folding bracket simplifies the fold-down action, allowing the leg to pivot quickly when the table needs to be stored or transported. When brought back up, the bracket returns the leg to its designed position, supporting repeatable alignment of the work surface. The 2 inch diameter steel body works with that mechanism to resist flex in normal use, so the adjustment and folding functions operate around a stable tube. Tying all of this together, the specific part number 656-7S-C1 gives shops and installers a consistent reference when ordering matching legs for repeat projects or expansions.

Common Questions About Camar Foldable Steel Table Legs

Selecting This Leg For Your Next Work Surface

This Camar foldable steel table leg from Peter Meier's Click Series pairs a 27-3/4 inch table height with a 2 inch diameter steel tube and 220 lb per-leg capacity, giving a clear, rated solution for supporting work surfaces. The 1-1/8 inch adjustable foot and attached folding bracket streamline setup, leveling, and fold-down in the field. When a project calls for a chrome-finished, height-adjustable leg with defined performance, this 656-7S-C1 model offers a straightforward, part-numbered option to build consistent tables and workstations.