Foldable Steel Table Legs, 1-1/8" Adjustment 2" Diameter, Table Height 27-3/4", Matte Black - Single Pack

Foldable Steel Table Legs For Work Surfaces

Foldable Steel Table Legs from Camar deliver a 27-3/4 inch table height, which sets up a comfortable working surface for benches, utility tables, and shop fixtures built around standard sit-down height. Each leg is built from steel, so the structure provides solid support when the work surface is under load. The leg has a 2 inch diameter, which spreads the load over a wider footprint and helps the table feel stable under normal use. A 220 lb per leg load bearing capacity gives each support a defined working limit, useful when planning overall table load based on the number of legs installed. The leg is finished in matte black, giving project builds a neutral, low-glare appearance that blends with many cabinet and shop layouts. The product is identified as Camar model 656-7S-19, which ties directly to repeat orders and matching legs on multi-table projects.

Key Table Leg Details That Support Builds

• The Peter Meier Click Series design provides a premium line of steel table legs, which gives installers a defined product family when matching legs across different tables.
• A 220 lb per leg load bearing capacity sets a clear structural rating, which helps in planning how many legs are needed to support a specific work surface and expected load.
• The 27-3/4 inch table-height leg length sets a standard working height, which simplifies layout when aligning multiple tables or matching existing cabinetry and work surfaces.
• The 2 inch diameter steel construction gives each leg a substantial profile, which supports stability for work surfaces that see frequent use.
• The matte black finish provides a clean, understated appearance, which works well in both commercial and residential environments where a dark leg is preferred.
• The manufacturer part number 656-7S-19 uniquely identifies this matte black version, which supports consistent reordering and replacement on future projects.

Folding Leg Mounting And Height Adjustment

These Camar foldable steel table legs are supplied with attached folding brackets, so each leg is already joined to its hinge mechanism for mounting to the underside of a table. The folding bracket is built with a single button release, which allows the leg to pivot between the vertical position and a stowed position against the table. This single button design sets a straightforward action to release the leg when folding or setting up the table. The leg foot incorporates 1-1/8 inch of adjustment, which lets the installer fine-tune table height within that range. That built-in adjustment helps compensate for minor floor irregularities and height matching between adjacent work surfaces.

How These Camar Legs Work On Projects

Where Foldable Steel Table Legs Are Applied

The Peter Meier Click Series foldable steel table leg in 27-3/4 inch height is suited to work surfaces and tables that need a standard table-height support with the option to fold away. The 220 lb per leg rating supports typical loads on shop tables, utility tables, and workstations sized around a four-leg layout. The attached folding bracket mounts to the underside of the table, positioning the 2 inch diameter steel leg to carry load directly down to the floor. The matte black finish allows these legs to serve in visible areas, such as office support tables or residential utility counters, where a dark, consistent appearance is preferred. Because the manufacturer identifies this part as 656-7S-19 within the Click Series, it aligns with projects that call out that specific product family.

Details That Keep Table Setups Consistent

The integrated 1-1/8 inch adjustment in the leg foot affects how precisely a table can be set to its working height. By dialing within that range, an installer can match the 27-3/4 inch nominal table height across multiple legs, reducing rocking and unevenness between corners. The single button release on the folding bracket defines a quick motion to shift the leg between operating and folded positions, which can streamline changeovers in multi-use spaces. With each leg rated to 220 lb, the load per support is clearly defined for planning four-leg or multi-leg configurations. The 2 inch diameter leg structure spreads this load over a wider cross-section than slimmer profiles, contributing to a solid feel when the table is in service. The matte black finish helps hide normal marks that occur around high-traffic work areas, supporting a consistent look over time on frequently used tables.

Common Questions About Camar 656-7S-19 Legs

Choose These Legs For Foldable Work Surfaces

The Camar Foldable Steel Table Legs in matte black combine a 27-3/4 inch table-height length, 2 inch diameter steel construction, and 220 lb per leg capacity to support stable work surfaces. With an attached folding bracket and single button release, each leg transitions between operating and folded positions in a defined motion. The 1-1/8 inch adjustable foot range helps align table height and accommodate floor variations during installation. Specifying model 656-7S-19 ties builds to a consistent leg style and finish across multiple tables and projects.