Foldable Steel Table Legs, 1-1/8" Adjustment 2" Diameter, Table Height 27-3/4", Matte Black - Set of 4

Foldable Steel Table Legs For Work Surfaces

Foldable steel table legs from Camar give you a sturdy, adjustable support solution for work surfaces and tables that need to move or stow away between jobs. Each leg has a 2 inch diameter steel tube, which provides a solid, rigid support column for typical shop or project loads. The table height of 27-3/4 inches puts worktops at a comfortable working level for many bench, assembly, and utility table setups. A 1-1/8 inch adjustment built into the foot lets you fine-tune overall height, which helps compensate for floors that are not perfectly flat. The matte black finish gives the legs a low-glare, neutral appearance that blends into many shop, office, or residential environments. This set of 4 legs keeps all corners of a rectangular top on the same system, which supports consistent height and adjustment across the table.

Key Details That Support Table Builds

• The steel table legs have a rated load bearing capacity of 220 lb per leg, which supports heavier worktops or equipment when weight is distributed across multiple legs.
• Each leg is built to a 27-3/4 inch table height, so tops land in a standard working range that suits many benches, desks, and utility tables.
• The 1-1/8 inch adjustment in the foot gives you vertical travel for leveling, which helps dial in a flat surface when floors vary from corner to corner.
• Attached folding brackets on every leg let the legs pivot up, which allows tables to store flatter against a wall or move through tighter spaces between uses.
• The matte black finish on the steel legs provides a uniform, professional look that visually recedes under the top, which suits both shop and customer-facing installs.

Mounting And Adjustment For Reliable Setups

Each Camar steel table leg arrives with its folding bracket already attached, so the leg and hinge function as a single unit during layout and mounting. The folding bracket uses a single button release, which simplifies changing between working position and folded position at each corner. With the leg length set for 27-3/4 inch table height, the 1-1/8 inch adjustable foot gives you room to refine height and pitch after the top is fastened. This combination of fixed length and adjustable foot helps keep multiple legs working together to support a flat work surface. The 2 inch diameter tube provides a broad contact area at the bracket and at the adjustable foot, which supports a stable feel under normal loading when aligned correctly.

Using Camar Click Series Legs In Real Work

Where These Table Legs Perform Best

Camar foldable steel table legs from the Peter Meier Click Series are suited to situations where tables need full steel support yet benefit from folding out of the way. The 220 lb per leg load bearing capacity supports substantial overall table capacities when four legs are used under a properly built top. At 27-3/4 inches table height, these legs match many utility and project tables in shops, garages, and light commercial environments. The matte black finish helps these legs blend under darker tops in offices or customer areas, keeping focus on the work surface itself. The 2 inch diameter construction gives each corner a robust presence, which is useful where tables may see frequent use or repositioning. With a set of 4 in matte black, builders can keep visual and dimensional consistency across the entire table.

Details That Support Repeatable Results

The combination of fixed 27-3/4 inch length and 1-1/8 inch adjustment in the foot lets installers repeat a target table height across multiple builds while still having fine-tuning range at each leg. The attached folding brackets turn each leg into a hinged support, so the hinge geometry stays consistent from project to project. A single button release on the folding bracket simplifies operation, which helps users deploy and stow tables without complex latches at every corner. The 220 lb per leg load bearing capacity provides a clear rating to plan around when sizing tops and expected loads. Using a 2 inch diameter leg also standardizes bracket interface and footprint, supporting a familiar layout process across tables. The matte black finish remains constant across the set, which keeps appearance uniform wherever these Camar 656-70-19 legs are used.

Common Questions About Camar 656-70-19 Legs

Select These Legs For Foldable Work Surfaces

This Camar 656-70-19 set of foldable steel table legs combines 27-3/4 inch table height, 2 inch diameter construction, and 1-1/8 inch foot adjustment to support practical work surfaces. The 220 lb per leg load capacity and matte black finish suit many bench, utility, and project tables where folding function and steady support must work together. For new builds or upgrades that call for the Peter Meier Click Series design, this set of 4 legs provides a matched, steel-based solution ready for mounting under your chosen top.