Lavi Bright Brass Foot Rail Kit For Bars

Lavi Bright Brass Foot Rail Kit is a bar and foot railing system from Lavi Industries that uses 2 inch diameter tubing to build a 12 foot long straight railing run, giving a consistent step height along the bar front. The bright brass finish creates a uniform appearance across the tubing, brackets, splices, and end caps, so the completed rail looks cohesive from end to end. The kit is designed as a straight 12 foot railing system, which suits bar fronts laid out in a continuous line without corners. Tubing lengths of 4 feet 2 inches and 3 feet 8 inches work together to reach the 12 foot span when joined, so installers can plan bracket locations knowing the rail length is fixed by the kit design. The bar and foot railing category placement identifies this kit as a dedicated solution for bar front foot support.

Key Foot Rail Details For Bar Projects

• The 2 inch diameter tubing creates a substantial rail profile underfoot, which helps establish a predictable resting point for guests along the bar length.
• The 12 foot long straight railing system layout defines the finished span, allowing bar fronts of similar length to be planned around a single continuous foot rail.
• Bright brass finish on the tubing presents a polished look, which helps the foot rail tie visually into other brass elements on the bar face.
• Foot rail kits feature 2 inch diameter tubing, so matching components in the system share the same profile for a consistent line along the bar.
• The kit is part of the bar and foot railing and accessories class, placing it within a coordinated system of parts intended for bar foot support builds.

Foot Rail Kit Layout And Assembly Approach

This 12 foot bar foot rail kit uses multiple tubing sections rather than a single long piece, so the lengths can be maneuvered more easily in tight bar areas during assembly. Two 4 foot 2 inch tubes and one 3 foot 8 inch tube make up the run, with splices used between sections, which helps keep alignment controlled where the tubes meet. Brackets position along the 12 foot span to support the 2 inch diameter rod, so the weight of the rail and foot traffic is carried into the bar structure at several points. End caps finish both ends of the bright brass tubing, which removes exposed cut ends and gives the rail a defined stopping point on each side of the bar front.

Using This 12 Foot Foot Rail In Bar Runs

Where This Bright Brass Foot Rail Kit Fits

This Lavi Industries foot rail kit is suited to bar fronts that need a straight 12 foot foot rail using 2 inch diameter tubing, giving guests a continuous place to rest their feet along that span. The combination of two 4 foot 2 inch tubes and one 3 foot 8 inch tube lets installers align joints away from high-traffic corners, using the fixed lengths to place splices where they best suit the bar layout. The bright brass finish works in bar spaces that use brass on taps, railings, or trim, helping the foot rail visually match nearby fixtures. As a bar and foot railing product, the kit serves as the primary foot support element along the base of the bar, tying the floor line to the bar face.

Why The Rail Components Support Consistent Results

The 2 inch diameter rod provides a uniform contact surface from one end of the 12 foot run to the other, which helps guests experience the same feel no matter where they stand along the bar. Using defined tubing lengths of 4 feet 2 inches and 3 feet 8 inches simplifies layout, since the total 12 foot rail length is determined by those pieces and the supplied splices rather than field measurements alone. Splices connect the tubing sections to form a straight line, which supports visual continuity in the bright brass finish and keeps the foot rail appearing as a single continuous element. Brackets spaced along the 12 foot system carry the 2 inch diameter tubing, which supports the rail under typical foot pressure along the bar front. End caps close off the bright brass tubing at each end, which helps protect the tube ends and give a finished edge where the rail stops.

Common Questions About This Foot Rail Kit

Selecting This 12 Foot Bright Brass Rail Kit

The Lavi Bright Brass Foot Rail Kit from Lavi Industries combines 2 inch diameter tubing, bright brass finish, and a fixed 12 foot straight layout, which helps match projects that call for a defined bar front foot rail. The specific tubing lengths of 4 feet 2 inches and 3 feet 8 inches, joined with splices and carried by brackets, let installers map joint and support points along the bar base with confidence. For bar fronts designed around a single 12 foot span in bright brass, this kit provides an integrated bar and foot railing solution ready to use in that layout.