12' hand rail kit bright brass by Lavi

12' Hand Rail Kit Bright Brass For Straight Runs

12' hand rail kit bright brass is a Lavi Industries straight railing system that uses 1-1/2 inch diameter rails to build a 12 foot long hand rail in a bright brass finish, giving bars or counters a consistent look along the full run. The kit uses two 6 foot tubes to reach 12 feet, so installers can handle each section more easily when working in tight bar fronts or crowded spaces. A single splice connects the 6 foot tubes, which keeps the joint aligned so the finished rail feels continuous along the bar or wall. Four brackets support the rail along the 12 foot length, spreading the load so the rail feels solid when mounted to the structure. The bright brass finish runs across all rail material in the kit, which keeps the visual line uniform from end to end in the finished installation.

Key Railing Details For Bar And Foot Runs

• The 1-1/2 inch diameter rail gives a comfortable, familiar grip size for hand or foot railing, which suits typical bar and counter installations where users lean or rest along the rail.
• The total 12 foot straight railing length matches many standard bar fronts and counters, so installers can cover a full run with one kit instead of building multiple shorter sections.
• The bright brass finish provides a polished metal appearance along the rail, which supports design schemes that call for brass bar hardware or trim in commercial or residential spaces.
• The use of two 6 foot tubes breaks the 12 foot rail into manageable sections, which simplifies transport through doors and halls and helps during layout on site.
• The splice between the 6 foot tubes aligns the joint and ties the rail sections together, which helps the finished hand rail act as one piece when mounted.
• The four brackets distribute support along the 12 foot rail, which promotes an even feel under load across the span when fastened to a suitable mounting surface.

Straight Rail Installation And Layout Considerations

The 12 foot hand rail layout uses two 6 foot tubes with a single splice, so planning centers on where to position the joint along the wall or bar face for appearance and support. The four brackets give multiple mounting points along the 12 foot run, which allows installers to align bracket placement with framing or solid structure behind finished surfaces. The bright brass 1-1/2 inch diameter rails present a round profile, so bracket positioning can be planned for a consistent centerline height along the entire straight run. Because the system is designed as a straight 12 foot railing, layout focuses on a linear path, which streamlines marking bracket locations and drilling in a single reference line along the mounting surface.

Using This Lavi Industries Kit In Bar Railing Work

Where This 12 Foot Hand Rail Kit Fits Best

The 12 foot hand rail kit from Lavi Industries is suited to straight bar or counter fronts that match or are close to the 12 foot length, because its two 6 foot tubes and splice are intended to construct a 12 foot long straight railing system. The 1-1/2 inch diameter rails align with common bar and foot railing dimensions, so the profile matches many existing brass rail themes in hospitality or entertainment spaces that call for this size. Bright brass finish across the kit components supports use in bar or counter designs that feature brass builders hardware or bar/foot railing and accessories, allowing the rail to visually tie in with other brass elements in the room. Because the system is described specifically as a straight railing system, it fits jobs where the rail follows a single, unbroken line rather than turns or offsets.

Why These Straight Rail Details Support Consistent Results

The two 6 foot tubes in this 12 foot hand rail kit make handling and alignment more predictable, because each section is short enough to maneuver during fitting while still forming a continuous 12 foot rail when joined with the splice. The single splice point gives one focused location to align and tighten, which simplifies getting the rail sections true so the bright brass surface appears level and smooth along the full length. Four brackets across a 12 foot span provide multiple mounting opportunities, which helps installers balance bracket spacing for both support and appearance on the wall or bar face. The 1-1/2 inch diameter bright brass rails present a uniform cylindrical surface, so once height and bracket locations are set, the rail centerline remains consistent, reducing the likelihood of height variation along the run. As a builders hardware handrails and accessories product identified as a 12 foot straight railing system, the kit brings its length, diameter, finish, and support pieces together in a way that is tailored to straightforward linear bar or foot railing jobs.

Common Questions About This 12 Foot Hand Rail Kit

Select This Bright Brass Rail Kit For Straight Runs

The Lavi Industries 12 foot hand rail kit in bright brass supplies 1-1/2 inch diameter rails, a splice, and bracket support sized for a straight 12 foot run, giving bar and counter projects a defined length, finish, and profile for planning. For jobs built around a single 12 foot straight line, this kit from the builders hardware handrails and accessories category provides the rail components needed to match that layout in a bright brass bar or foot railing system.