Lavi stainless steel foot rail kit 12 foot satin

Lavi Stainless Steel Foot Rail Kit For Bars

Lavi stainless steel foot rail kit provides a 12 foot long straight railing system using 2 inch diameter tubing, so bar fronts gain a defined foot rest line sized for typical commercial layouts. The satin stainless steel finish creates a consistent look across every visible tube and fitting, which keeps the rail visually clean along the entire run. The kit structure is designed as a straight railing system, which suits bars and counters laid out in a linear run where precise miters are not required. Foot rail kits feature 2 inch diameter tubing, giving patrons a stable surface underfoot while maintaining a proportional look against standard bar faces. Bright Brass and Satin Stainless Steel finishes are available in this kit family, so designers can align the rail finish with other metalwork in the space. The 12 foot layout is built from shorter tube segments, which simplifies handling at the job site.

Key Rail Kit Details For Bar Projects

• The 12 foot rail length uses 4 foot 2 inch tubing and 3 foot 8 inch tubing segments, so installers can maneuver pieces more easily in tight bar interiors while still achieving a full straight run when assembled.
• The 2 inch diameter tubing establishes a substantial foot rail profile, giving users a comfortable surface to rest against while maintaining a familiar scale used across many bar and foot railing and accessories installations.
• The satin stainless steel finish on this Lavi Industries foot rail kit produces a uniform appearance along the rail, which supports visually consistent bar fronts where other stainless elements are already specified.
• The straight railing system layout focuses on a 12 foot long linear application, so it aligns well with bars or counters that require a simple, continuous run rather than complex directional changes.
• The bar and foot railing and accessories category positioning of this kit indicates its role specifically at bar fronts, guiding use where a durable, permanent foot rest is required along a fixed counter line.

Foot Rail Tubing Layout And Assembly Fit

This 12 foot bar foot rail kit from Lavi Industries relies on defined tube segment lengths to control layout, with 4 foot 2 inch tubing and 3 foot 8 inch tubing sections combining into a straight run that matches the specified overall length. The 2 inch diameter tubing dimension governs bracket and splice interfaces, so every connection point is built around that consistent outside size. The kit design as a straight railing system focuses on aligning all segments on a single axis, which streamlines measuring the bar face and setting consistent bracket spacing across the run. The satin stainless steel finish is applied to all rail tubing in this configuration, so cut ends and connections present a coordinated appearance once assembled along the bar.

Using This 12 Foot Bar Foot Rail Kit

Where This Lavi Foot Rail Kit Is Applied

This Lavi stainless steel foot rail kit is positioned in the bar and foot railing and accessories category, so its primary use is along bar fronts or counters where patrons need a continuous foot rest. The 12 foot long straight railing system layout supports installations on linear bar sections that match or approximate this length, helping installers align the rail with the main serving edge. Because the tubing diameter is 2 inches, the visual mass of the rail pairs well with standard commercial bar bases and kick surfaces, avoiding an undersized look. Bright Brass and Satin Stainless Steel finishes are available across the broader foot rail kit line, allowing projects to coordinate this specific satin stainless steel kit with other metal finishes in the room. The 4 foot 2 inch tubing and 3 foot 8 inch tubing sections assist in fitting the rail within typical bar bay spacings while maintaining the total 12 foot straight configuration once assembled on site.

Why These Foot Rail Details Support Consistent Results

The defined 2 inch diameter tubing used in this 12 foot bar foot rail kit ensures that brackets, splices, and end caps from the kit interface around a single, consistent tube size, which simplifies aligning parts along the run. Foot rail kits feature 2 inch diameter tubing specifically to give end users a stable and familiar foot support position while standing at the bar, which contributes to comfort along the entire 12 foot span. The satin stainless steel finish across the tubing produces an even appearance at joints where 4 foot 2 inch and 3 foot 8 inch pieces meet, so transitions read as part of a continuous rail rather than separate components. The straight railing system configuration directs installers toward a single-axis layout, which reduces layout complexity when positioning bracket locations along a flat bar face. By selecting this Lavi Industries foot rail kit identified by manufacturer part number 44-FR1012/2, projects maintain clear traceability to a specific 12 foot, 2 inch diameter satin stainless steel configuration when future work references this installation.

Common Questions About This Lavi Foot Rail Kit

Selecting This 12 Foot Foot Rail For Your Bar

This 12 foot bar foot rail kit from Lavi Industries combines 2 inch diameter tubing, satin stainless steel finish, and defined tube segment lengths to support straightforward bar front installations. The straight railing system layout targets linear bars where a single continuous rail run is needed, so layout efforts focus on aligning bracket positions along one face. The bar and foot railing and accessories category placement confirms its role at bar fronts, where a permanent foot rest contributes to user comfort. Selecting the Lavi stainless steel foot rail kit by its 44-FR1012/2 designation ties the project to a clearly identified 12 foot, 2 inch diameter satin stainless steel solution for consistent future reference.