12' hand rail kit, satin stainless steel
Description
12' Hand Rail Kit For Straight Runs
12' hand rail kit from Lavi Industries provides a coordinated way to build a 12 foot long straight railing system using matched components. The kit uses 1-1/2 inch diameter rails, which create a consistent grip size along the entire run, important for user comfort and predictable layout on bar or foot rail projects. The satin stainless steel finish gives the rail a uniform, low-sheen appearance, which supports a clean, professional look in builders hardware applications where glare control and visual consistency matter. The system is part of the Handrails and Accessories product class, so components are designed to work together as a railing solution rather than as mixed miscellaneous parts. As a 12 foot straight railing system, it is suited to applications such as bar and foot railing where a continuous, aligned hand rail is required.
Hand Rail Kit Details That Support The Job
- The 1-1/2 inch diameter rails establish a fixed cross-section, which simplifies bracket placement and alignment along the length of the hand rail in bar and foot railing installations.
- The 12 foot long straight railing system format defines the total run, which aids in planning layout against finished surfaces and matching railing length to the installation span.
- The satin stainless steel finish creates a consistent surface appearance, which helps visually tie together brackets, tubes, and wall returns on visible builders hardware projects.
- The kit is part of Lavi Industries handrails and accessories, which means the tubes, splice, brackets, and wall returns are configured to function together as a unified hand rail assembly.
Hand Rail Mounting And Straight Run Alignment
The hand rail kit is specified for a 12 foot long straight railing system, which focuses the installation on a single, linear run rather than curved or angled segments. Using the two 6 foot tubes, the run is set up in two equal sections, which helps stage installation from each end toward the center. The 1-1/2 inch diameter rails keep the mounting profile consistent at every bracket and wall return, which simplifies drilling layout and alignment. The satin stainless steel finish supports a uniform look when the rail is mounted along walls or bar faces, helping the finished installation read as a single continuous element.
Using This 12' Hand Rail Kit On Site
Where This Lavi Hand Rail Kit Fits Best
This hand rail kit is in the Builders Hardware category under Bar/Foot Railing and Accessories, which positions it for use on bar fronts, foot rails, and similar railing locations. The 12 foot long straight railing system description aligns with runs where a single continuous straight line is needed between two end points. The 1-1/2 inch diameter rails support consistent spacing off finished faces when used with the provided brackets and wall returns, which is important for repeatable placement along cabinetry or millwork. In these environments, the satin stainless steel finish provides a neutral metallic look that coordinates with other stainless hardware in commercial or residential bar areas.
Details That Help Railing Assembly Go Smoothly
The kit configuration, described as including all material necessary to construct a 12 foot long straight railing system, means the tubes, brackets, splice, and wall returns are selected to work together for that specific run length. The two 6 foot tubes break the span into manageable sections, which helps with handling and fitting in tight job-site conditions while still forming a full 12 foot rail when joined. The single splice is intended to connect the 6 foot tubes into one continuous rail, which supports alignment and load transfer across the joint. Four brackets provide multiple support points along the rail, which helps distribute loads and maintain straightness over the 12 foot length. Two wall returns terminate the rail at the ends, which finishes the installation at the wall interface and defines the start and stop points of the hand rail.
Common Questions About This Hand Rail Kit
What is the total length this hand rail kit is designed to build?
The hand rail kit is described as a 12 foot long straight railing system, so it is configured to construct a continuous 12 foot run using its matched components.
What diameter are the rails in this Lavi Industries kit?
The kit uses 1-1/2 inch diameter rails, which sets the grip size and bracket interface for the entire railing, keeping mounting geometry consistent along the run.
What finish does the 12' hand rail kit use?
The 12 foot hand rail kit has a satin stainless steel finish, which gives the rail a uniform, low-sheen appearance suitable for visible bar and foot railing installations.
How is the 12 foot railing length created from the tubes?
The kit uses two 6 foot tubes and one splice, so the tubes are joined with the splice to form a continuous 12 foot rail for straight applications.
How is this hand rail kit generally mounted along a surface?
The system relies on four brackets and two wall returns, so the rail is supported along its length by brackets and terminated at walls with the wall returns.
What type of applications is this hand rail kit intended for?
The kit is categorized under Bar/Foot Railing and Accessories and as Handrails and Accessories, positioning it for straight bar fronts, foot rails, and similar railing uses.
Select This 12' Kit For Straight Rail Runs
This 12 foot hand rail kit from Lavi Industries combines 1-1/2 inch diameter rails, satin stainless steel finish, and coordinated brackets, splice, and wall returns to create a defined straight railing system. For bar or foot railing projects that call for a single 12 foot straight run, the matched components and fixed diameter support consistent mounting, clean visual alignment, and predictable layout along finished surfaces.
