LED Low Voltage Pucks Recess Mount, 3 and 9 Watt 45Deg Swivel Pucks - Hardware Concepts, Inc. 5.12080-078

3 Watt LED Puck Light For Focused Task Lighting

3 watt LED puck light from Hardware Concepts gives compact task lighting while keeping power draw low, which helps when multiple pucks are laid out under cabinets or in display areas. The recess mount design sets the puck into the surface, so the fixture stays low profile and out of the way during everyday use. A 45 degree swivel lets the light be aimed toward a backsplash, work surface, or product display, helping direct light where it is actually needed. The puck operates on 12 volt low voltage power, which suits typical cabinet and furniture lighting layouts. Each puck is made of metal, giving a solid housing around the LED for everyday shop and residential environments. The brushed chrome finish provides a neutral, professional look that pairs well with many hinge and pull finishes in cabinetry.

Key LED Puck Details That Support Your Project

• This value line LED puck from Hardware Concepts is designed as a recess mount only unit, which keeps the fixture seated neatly in the material for a clean appearance around cabinets or displays.
• The 3 watt LED load provides focused output without high energy use, which helps when specifying several pucks along a run of wall cabinets or display shelving on a single low voltage system.
• A 45 degree swivel function lets the light be aimed, so installers can direct illumination onto counters, products, or signage without relocating the fixture cutout after drilling.
• The puck housing is metal, giving a sturdy body around the LED that suits repeated daily use in residential or commercial cabinetry where fixtures may be occasionally contacted.
• No heat emission from the LED source keeps surrounding cabinet materials cooler in normal use, which is important when the fixture sits in a recess cut into wood or composite panels.
• The puck is UL Listed, so the fixture has a documented safety listing that supports use in typical cabinet, millwork, and display lighting installations.

Recess Mount LED Puck Installation And Power Setup

This recess mount LED puck is built to sit inside a cutout, so the visible face stays flush with the mounting surface for a streamlined look along cabinet bottoms or interior panels. A 36 inch lead extends from the puck, giving working length to reach toward a junction point or the supplied LED driver without strain on connections. The LED driver includes a 72 inch power cord, which offers additional reach to locate the power connection where it best fits the cabinet or casework layout. The system runs on 12 volt low voltage, aligning with common under-cabinet lighting setups that keep high voltage away from tight spaces in casework. Plug-in installation keeps the electrical side straightforward, helping move from rough cabinet work to finished lighting with fewer separate wiring steps.

How This 45 Degree Swivel LED Puck Works In Practice

Where The Recess Mount LED Puck Performs Best

This recess mount LED puck is suited to applications where a low profile fixture is preferred, because the body sits inside the surface rather than projecting below it. Under-cabinet lighting runs benefit from this layout, as the puck face can align with the cabinet bottom for an integrated appearance across multiple units. The 45 degree swivel feature adds flexibility in these tight spaces, since the beam can be aimed after the hole is cut, supporting precise light placement on counters or backsplashes. In display cases or shelving, the brushed chrome metal body presents a professional look that coordinates with many metal shelf supports and cabinet hardware. The fixture operates as part of a 12 volt low voltage system, which fits common approaches to casework lighting in shops that standardize on low voltage components.

Details That Support Consistent Results And Layouts

The 3 watt rating on this low voltage LED puck gives installers a predictable output level per fixture, simplifying calculations for how many pucks to place along a run to reach the desired brightness. Because the puck produces no heat emission in normal operation, it works well where the recess cut positions the housing close to wood, laminate, or composite substrates. The 36 inch lead from the puck and 72 inch power cord on the LED driver together give flexibility in routing wiring paths through cabinets, helping align connection points with existing cutouts or chase spaces. The integrated LED driver means the power conversion is already addressed, so the installer can focus on mounting positions and lead management instead of sourcing a separate driver. UL Listing supports use in professional woodworking and millwork environments that rely on listed components for their lighting layouts.

Common Questions About This Low Voltage LED Puck

Select This LED Puck For Low Profile Cabinet Lighting

The 3 watt LED puck light from Hardware Concepts combines recess mount installation, 45 degree swivel aiming, and 12 volt low voltage operation, so it fits naturally into under-cabinet and display lighting plans. The metal construction and brushed chrome finish support use in professional cabinetry where appearance and durability both matter. With an integrated LED driver and no heat emission, this UL Listed puck streamlines layout and wiring choices for woodworkers and installers planning their next lighting run.