LED Low Voltage Pucks Recess Mount, 3 and 9 Watt 45Deg Swivel Pucks - Hardware Concepts, Inc. 5.12080-080

LED Low Voltage Puck Lights For Focused Tasks

LED low voltage puck lights from Hardware Concepts, Inc. use 3 watt LED output to deliver focused lighting while limiting power draw, which matters when adding multiple points of light across cabinetry or display runs. The 45 degree swivel puck design lets the installer angle light where it is needed, which helps target work surfaces or features without moving the fixture location. Recess mount only construction keeps the puck set into the surface, which supports a clean finished look in cabinetry or casework. The polished brass metal puck housing provides a finished appearance while using a metal body, which suits projects where visible trim must match brass hardware. Each unit is described as a value line LED puck light, which fits jobs where controlled cost is important while still using a dedicated LED puck solution. The Hardware Concepts, Inc. brand and part 5.12080-080 clearly identify this 3 watt polished brass swivel model for repeat ordering.

Key LED Puck Details That Support Your Work

• The 3 watt LED rating defines the light output and power demand, which helps plan transformer capacity and overall load when several puck lights are installed on the same run.
• The 45 degree swivel puck feature lets the light head be angled, which is useful for directing beams onto counters, displays, or backsplash areas without relocating the recess cutout.
• The recess mount only design means the LED puck sits set into the mounting surface, which gives a low profile appearance that suits built-in cabinetry, shelving, or similar millwork projects.
• The metal construction of the LED pucks provides a solid housing, which supports durability when installed in shop-built cabinets or furniture that will see regular door and drawer use nearby.
• The polished brass finish on this metal puck offers a specific visual look, which helps coordinate lighting hardware with brass hinges, pulls, or other brass components in the same installation.
• The 36 inch lead on the puck and the 72 inch power cord on the LED driver give defined cable lengths, which aids in laying out driver locations relative to each recess-mounted puck light.

Recess Mount LED Puck Installation And Power

The recess mount only configuration means the installer prepares a cutout to set the LED puck into the surface, which keeps the puck face nearly flush and suited to tight cabinetry spaces. The 36 inch lead attached to the 3 watt puck gives fixed wiring reach from the fixture to the driver, which guides how far drivers can be located from the light point. Each LED puck is listed as 12 Volt, which defines the low voltage system and informs how runs are laid out from the driver to each puck. The LED driver with 72 inch power cord establishes the distance from a wall outlet or power source to the driver position, which is important when planning access inside cabinets. The plug-in installation description indicates the driver connects to power via the cord, which simplifies powering the 12 Volt LED puck compared to hardwired setups.

Using This 45 Degree Swivel LED Puck On Projects

Where This 3 Watt LED Metal Puck Fits Best

This 3 watt LED metal puck from Hardware Concepts, Inc. is classified under Lighting and LED Puck Lights, which aligns it with cabinet, display, or furniture lighting tasks that need compact fixtures. The 45 degree swivel puck function allows the light to be aimed toward counters, shelves, or product displays, which is helpful in kitchens, offices, or retail casework where direct light improves visibility. Recess mount only construction lets the puck be built into panels or cabinet bottoms, which is useful when surface-mounted fixtures would interfere with doors or visual lines. The metal puck body supports use in woodwork or millwork environments where solid housings are preferred. The polished brass finish makes this particular 5.12080-080 model suited to projects that already feature brass hardware, which keeps visible lighting trim consistent with hinges and pulls. The UL Listed status means this LED puck meets recognized listing requirements, which matters on commercial or regulated jobs that specify listed components.

Why These LED Puck Details Help Workflow

The 12 Volt rating on these LED pucks standardizes the low voltage side of the system, which simplifies planning when multiple Hardware Concepts LED pucks are tied into the same power approach. Each LED puck having a power supply described as an LED driver means power conditioning is handled at the driver, which lets the installer focus on running low voltage leads to recess points. The specified 36 inch lead and 72 inch power cord lengths give clear limits, which supports accurate measurement of driver placement relative to each light and the nearest outlet. The note that all LED pucks are not dimmable sets the control expectation upfront, which avoids designing dimming schemes around this particular 3 watt polished brass model. The absence of heat emission called out in the description means the LED puck operates without notable warming, which is significant when fitting lights into tight wood cavities or enclosed cabinet spaces. The mention that accessories are sold separately indicates that this 12 volt LED puck and driver combination is the core lighting element, which keeps planning focused on the LED puck system as the primary task lighting component.

Common Questions About This LED Puck Light

Selecting This Puck For Low Voltage Lighting Runs

The 5.12080-080 LED low voltage puck light combines a 3 watt 12 Volt LED source, recess mount only installation, and a 45 degree swivel head, which supports targeted under-cabinet or display lighting layouts. The polished brass metal puck housing and UL Listed status align with projects that demand both a defined brass appearance and listed components. With a 36 inch lead on the puck and a 72 inch power cord on the LED driver, the system offers clear distances for layout inside cabinetry or casework. For jobs calling for compact, plug-in 12 Volt LED puck lighting under the Hardware Concepts, Inc. value line, this polished brass 45 degree swivel model is a practical choice.