LED Low Voltage Pucks Recess Mount, 3 and 9 Watt 45Deg Swivel Pucks - Hardware Concepts, Inc. 5.12080-079

3 Watt LED Puck Light For Focused Task Lighting

3 watt LED puck light from Hardware Concepts, Inc. provides low voltage task lighting that concentrates light where cabinets or displays need it most, so installers can achieve bright output while keeping energy use down. The 45 degree swivel puck design allows the light head to angle off the mounting surface, which helps direct light onto work areas or products instead of wasting it straight down. Recess mount only construction means the puck sits flush in a routed hole, giving built-ins and casework a clean, integrated look. The LED pucks are made of metal, so the housing stands up to regular use in cabinet and millwork environments. No heat emission from the LED source supports comfortable use around hand contact areas and sensitive materials.

Key LED Puck Details That Support Your Projects

• The 3 watt 45 degree swivel puck concentrates usable light while staying efficient, which supports projects that need focused illumination without heavy power demand.
• Recess mount only design lets the puck sit into the surface, helping installers deliver a finished appearance in cabinet bottoms, shelves, or soffits.
• The LED pucks are made of metal, so the fixture body resists everyday handling and contact in working kitchens, offices, or retail casework.
• No heat emission from the LED source helps protect surrounding finishes and contents, which matters in tight cabinet cavities and display compartments.
• Each LED puck is 12 Volt, aligning with low voltage lighting layouts where drivers and wiring are grouped in a central location.
• LED puck are not dimmable, which keeps circuit behavior straightforward on installations designed for full-output lighting only.
• All LED pucks are UL Listed, so the product meets recognized safety standards important on commercial and residential jobs.
• Hardware Concepts' value line LED puck lights support cost-conscious projects while still delivering the core lighting performance described.

Recess Mount LED Puck Light Installation Workflow

Recess mount only construction means this LED puck installs into a cutout, allowing the metal housing to sit flush and support a clean underside on cabinets or shelves. The 45 degree swivel puck design lets installers rotate the aiming direction after the recess is prepared, so the beam can be aimed where light is actually needed. A 36 inch lead on the puck provides working length for routing low voltage wiring back to a junction point or driver location. Each LED Puck has a Power Supply included, and each LED driver has a 72 inch power cord, which supports flexible placement of the driver relative to the nearest outlet in a cabinet, closet, or equipment area.

Using This Hardware Concepts LED Puck In Real Projects

Where This 45 Degree Swivel Puck Performs Best

This 3 watt LED puck light fits low voltage cabinet and display lighting where a recess mount only fixture is preferred, because the integrated look contributes to clean millwork lines. The 45 degree swivel puck orientation focuses the beam across countertops, shelves, or product displays, letting the installer fine-tune the aim after mounting. Hardware Concepts' value line LED puck lights support projects that call for consistent performance across multiple cabinets or bays, since each LED Puck has a Power Supply included to operate the fixture. The 12 Volt setup suits installations where a low voltage lighting system is already planned, keeping wiring layouts consistent along runs of cabinetry or casework.

Details That Support Consistent Output And Layout

No heat emission from the LED light source helps protect finishes and stored items beneath the puck, which is useful above work surfaces, merchandise, or decorative pieces. The LED pucks are made of metal, giving a solid housing that holds up as doors open and close and as users work directly under the light. LED puck are not dimmable, so each 3 watt LED puck light delivers steady full-output illumination, simplifying planning when designing circuits that stay at one light level. All LED pucks are UL Listed, which supports use in both residential and commercial woodworking projects that call for recognized electrical compliance. The 36 inch lead on the puck combined with the LED driver with 72 inch power cord gives installers reach to position drivers in accessible cabinet sections while keeping the visible fixture placement driven by lighting needs instead of outlet proximity.

Common Questions About This 3 Watt LED Puck Light

Selecting This LED Puck Light For Cabinet Projects

This Hardware Concepts, Inc. 3 watt LED puck light with 45 degree swivel puck design, recess mount only construction, and metal housing delivers focused low voltage lighting tailored to cabinet and display work. With 12 Volt operation, UL Listing, and no heat emission, it fits woodworking installations that need integrated, safe illumination. Choose this LED low voltage puck when a value line fixture with consistent full-output lighting supports your layout and project requirements.