Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DynaPro narrow front lock device is a left-side locking device designed for use with Grass DynaPro 1-D slides, so it ties the drawer front securely to the slide system and helps keep the motion consistent over the life of the drawer. The Grass America design is specified for both narrow and standard width drawers, meaning one part number can serve multiple drawer widths on a project and simplify part planning. This same device is also specified for narrow and standard width inset drawers, so it supports a consistent installation approach when working with inset fronts across a run of cabinets. The manufacturer part F134100699233 clearly identifies this exact left-side unit, helping separate it from right-side components and reducing selection errors when ordering for a bank of drawers.
The locking device carries a recommended pre-drilling size of 2.5 mm, or 3/32 inch, which provides a clear guide for preparing pilot holes and can help the fasteners seat more predictably into the drawer material. A minimum inside drawer width of 95 mm, or 3-3/4 inch, is specified, so the drawer interior needs at least this width for the device to sit properly at the front and work with the DynaPro 1-D slide geometry. Height adjustment of plus 3.5 mm is provided, giving the installer room to shift the drawer front upward relative to the slide connection to fine-tune reveals along a cabinet run.
This left locking device is described for narrow and standard width drawers, so it is suited to small interior organizers as well as typical cabinet drawers that fall within the slide range, which can keep hardware uniform from one opening to the next. Its specification for narrow and standard width inset drawers means it also fits inset projects where the drawer front sits inside the face frame or opening, letting the same hardware support both overlay-style and inset-style drawer configurations that share the DynaPro 1-D slide. The minimum inside drawer width of 95 mm, or 3-3/4 inch, defines the lower size limit for the drawer box interior, which helps determine when this device can be used on particularly narrow storage pullouts or slim organizers.
The locking device is for use with Grass DynaPro 1-D slides, so it connects directly to that specific slide platform and helps keep the drawer front anchored consistently to the runner, which is important when repeating the same reveal across a bank of drawers. With a height adjustment range of plus 3.5 mm, the device gives some upward shift of the drawer front relative to the slide, allowing fine tuning when a run of fronts needs to line up with doors or adjacent drawers. The recommended 2.5 mm, or 3/32 inch, pre-drilling helps create pilot holes that match the hardware recommendation, which can improve hold in common drawer materials and support cleaner, repeatable installation steps from one drawer to the next. The clearly defined left orientation, paired with manufacturer part F134100699233, also aids in separating left and right units on the bench, which supports smoother assembly and reduces mix-ups during fitting.
This locking device is for use with Grass DynaPro 1-D slides, so it connects directly to that slide family and helps secure the drawer front to the runner during everyday operation.
This device is specified for narrow and standard width drawers, and requires a minimum inside drawer width of 95 mm, so it works on smaller drawers that meet this interior width.
This locking device is described for narrow and standard width inset drawers, meaning it functions with inset fronts that share the DynaPro 1-D slide configuration.
This product is a left locking device, so it is intended for the left side of the drawer to pair with the corresponding DynaPro slide on that side.
The locking device offers height adjustment of plus 3.5 mm, allowing the drawer front to be shifted upward relative to the slide connection for finer reveal alignment.
The manufacturer specifies pre-drilling of 2.5 mm, or 3/32 inch, which guides the drill bit choice so fasteners can seat properly into the drawer front area.
This DynaPro narrow front lock device is identified for use with Grass DynaPro 1-D slides, so it suits projects already built around that slide platform. Its ability to serve narrow, standard width, and inset drawers using the same left-side unit helps keep hardware choices straightforward while the defined minimum inside drawer width of 95 mm and the plus 3.5 mm height adjustment detail support practical layout and alignment planning across multiple drawer openings.
Sold In: 1 Each
