Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Narrow Front Locking Devices For Use With Grass DynaPro 1-D Slides - Right describes a Grass America locking device designed to work with DynaPro 1-D drawer slides, so it ties directly into that specific undermount slide system on the right side. The SAP description "DYNAPRO NARROW FRONT LOCK DEVICE - RIGHT" confirms that this is the right-hand version, which matters when matching left and right parts during drawer construction or service. The web description notes it is for narrow and standard width drawers, so the same part serves both slim drawer boxes and more typical widths in a run of cabinets. The same web description also states it is for narrow and standard width inset drawers, letting this device match inset front applications across different drawer widths in a project. The pre-drilling recommendation of 2.5 mm, or 3/32 inch, guides the drill bit selection at the bench so hole sizing lines up with the device design.
The web description lists a height adjustment of plus 3.5 mm, which provides a defined upward adjustment range for the drawer front relative to the slide connection. That adjustment range lets installers fine-tune vertical alignment between the drawer front and surrounding faces when dialing in narrow or standard width drawer fronts. The minimum inside drawer width of 95 mm, or 3-3/4 inches, sets a clear interior size threshold, so drawer boxes can be designed or evaluated to meet that requirement before fitting the device. The specified pre-drilling size of 2.5 mm, which is also expressed as 3/32 inch, matches common drill bit sizes and gives a repeatable starting point for hole preparation when laying out multiple drawers.
The product name describes Narrow Front Locking Devices For Use With Grass DynaPro 1-D Slides - Right, which indicates this right-hand device works where Grass DynaPro 1-D slides are already specified for drawer motion. The category designation as Drawer Slides Accessories shows it plays a supporting role in the overall drawer slide system, contributing to how the drawer box connects to the Grass DynaPro 1-D runners. The reference to narrow and standard width drawers in the web description means it fits both compact storage drawers and everyday cabinet drawers that share the same slide family. The additional mention of narrow and standard width inset drawers points to use in inset face-frame or flush-panel designs where the front edge relationship is more visually sensitive.
The stated height adjustment of plus 3.5 mm gives a specific vertical tuning window, so the right-hand Grass America device can be moved within that range to match reveals across neighboring drawer fronts. By defining a minimum inside drawer width of 95 mm, or 3-3/4 inches, the product data signals that internal drawer box space must meet or exceed that size for the locking device to sit within its intended geometry. The recommended pre-drilling of 2.5 mm, also described as 3/32 inch, provides a dimensioned pilot that supports firm mounting while keeping material removal modest on the drawer member. Identifying the part as a Narrow Front Locking Device For Use With Grass DynaPro 1-D Slides ties these dimensional details directly to that slide line, so drawer designs based on DynaPro 1-D can take advantage of the defined adjustment and inside width guidance.
The web description states it is for narrow and standard width drawers and also for narrow and standard width inset drawers, so it serves both regular and inset drawer front layouts within those width ranges.
The product name and description specify use with Grass DynaPro 1-D slides, so it is intended to lock the drawer to that particular Grass DynaPro 1-D undermount slide platform on the right side.
The web description lists a minimum inside drawer width of 95 mm, or 3-3/4 inches, which defines the smallest internal drawer width targeted by this right-hand locking device design.
The height adjustment is specified as plus 3.5 mm, giving an upward adjustment window that supports aligning drawer fronts within that measured range relative to the Grass DynaPro 1-D slides.
The description recommends pre-drilling of 2.5 mm, given as 3/32 inch, which guides pilot hole drilling so the locking device seats as intended on the drawer component.
The manufacturer part number F134100700233 and the SAP description DYNAPRO NARROW FRONT LOCK DEVICE - RIGHT give precise identifiers when selecting or reordering the right-hand device.
The manufacturer part number F134100700233 and the name Narrow Front Locking Devices For Use With Grass DynaPro 1-D Slides - Right connect this Grass America component to a specific DynaPro 1-D application on the right side. The stated support for narrow and standard width drawers, along with narrow and standard width inset drawers, links the device to a defined drawer width and front style range. The minimum inside drawer width of 95 mm, plus the plus 3.5 mm height adjustment and the recommended 2.5 mm, or 3/32 inch, pre-drilling dimension, add concrete sizing and adjustment details to guide selection for drawer projects using Grass DynaPro 1-D slides.
Sold In: 1 Each
