Grass DynaPro 18 Inch Undermount Drawer Slides

Grass DynaPro 18 inch undermount drawer slides provide full extension with a synchronized mechanism, so drawers open their full travel while both slides move together for smooth motion that supports accurate reveals and consistent access to the entire drawer box. The integrated soft-close damping system slows the last part of travel, which protects the drawer front from hard impacts in everyday use. These Grass America slides are designed as undermount drawer slides, keeping hardware out of sight while supporting a 100 lb load rating that serves typical cabinet storage needs in woodworking projects. The system works for face frame or frameless application, so the same model can be used across different cabinet construction methods. These slides are specified for 5/8 inch (16 mm) or 3/4 inch (19 mm) drawer material, tying the hardware choice directly to common drawer side stock used in shops.

Key Functional Details For Cabinet Projects

• The full extension with a synchronized mechanism lets the drawer travel its entire length, keeping items at the back accessible and helping installers align fronts because both sides run evenly.
• The soft-close damping system controls closing speed, which reduces slamming and helps maintain front alignment over time in day-to-day drawer use.
• The 100 lb load rating supports typical residential and light commercial drawer contents, giving installers a defined capacity when selecting slides for storage loads.
• Face frame or frameless application capability allows one model to serve different cabinet constructions, which simplifies planning when a shop works with both styles.
• Compatibility with 5/8 inch (16 mm) or 3/4 inch (19 mm) drawer material ties directly to common plywood and solid stock sizes, supporting straightforward drawer box layout and machining.

Undermount Slide Fit, Load, And Adjustment

These undermount drawer slides from Grass America are part of the DynaPro 3-D system, which provides integrated 3-dimensional adjustment for alignment of the drawer front. Height adjustment of plus 3.5 mm gives vertical fine-tuning at the front, useful when lining up a run of fronts under a countertop. Side adjustment of plus or minus 1.5 mm allows the front gap to be centered between adjacent fronts or cabinet sides. Tilt adjustment of plus 4.0 mm shifts the front angle, which helps match reveals at top and bottom on taller fronts. Together with the 100 lb load rating, these adjustments support both fit and function for cabinetry using 5/8 inch or 3/4 inch drawer material.

Using Grass DynaPro Slides In Real Projects

Where These Undermount Slides Are Applied

This Grass DynaPro 18 inch soft-close full extension undermount slide is specified for face frame or frameless application, so it can be used in traditional face frame cabinets as well as frameless casework. The undermount design supports clean interior drawer box sides because the slides sit beneath the drawer, which suits cabinetry where visible hardware is not desired. With a 100 lb load rating, these slides fit general storage drawers in kitchens, baths, and shop-built furniture that rely on 5/8 inch (16 mm) or 3/4 inch (19 mm) drawer material. The synchronized full extension travel also supports use in deeper drawers where access to the back is important for workflow.

Adjustment Details That Support Clean Alignment

The DynaPro system offers integrated 3-dimensional adjustment for alignment of the drawer front, which directly supports tight, repeatable reveals. Height adjustment of plus 3.5 mm lets installers raise the front relative to the cabinet opening, useful when matching adjacent drawer banks. Side adjustment of plus or minus 1.5 mm shifts the drawer front left or right, helping center gaps between doors and drawers in a shared run. Tilt adjustment of plus 4.0 mm changes the front angle, which can correct for small racking in the drawer box or cabinet so the top and bottom reveals read evenly. The note that an adjustment adapter accessory is required for 3-D tilt adjustment ties the tilt function to that specific component, so tilt is applied through the adapter while height and side adjustments work through the integrated mechanisms.

Common Questions About Grass DynaPro Slides

Selecting These Slides For Your Next Build

The Grass DynaPro 18 inch soft-close full extension undermount drawer slides bring a synchronized mechanism, 100 lb load rating, and integrated 3-dimensional adjustment into one hardware choice for face frame or frameless application. For cabinet shops and serious DIY builders working with 5/8 inch or 3/4 inch drawer material, these slides align slide type, material thickness, and front adjustment into a single specification. Select this F130135006204U model when an undermount layout with soft-close damping and precise front alignment is required for the job.