Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Air Hose Assembly 5 ft from C.A. Technologies is a low pressure air and fluid hose built for spray equipment work where dependable air and fluid flow are needed. The air hose section uses textile reinforcement, which supports the hose structure under use so it holds its shape on the floor or rack. A smooth red synthetic rubber casing around the air hose provides a consistent exterior, helping the hose move across surfaces without grabbing. The air hose is rated for 200 psi working pressure, giving a defined limit for low pressure spray gun and equipment connections. For fluid movement, the assembly uses a nylon 11 tube that is silicone-free, which keeps the fluid path consistent with systems that avoid silicone. Braided high strength synthetic yarn around the fluid tube supports the hose wall, helping it stay stable when routed along equipment. A smooth black synthetic rubber casing (RMA B ORS) on the fluid hose provides an oil resistant outer surface that stands up to typical spray area conditions.
The 1/4 inch air hose assembly in a 5 ft length provides a defined run length, which works well when a short, controlled connection is needed between spray equipment components. The low pressure air hose design with 200 psi working pressure fits applications where air supply to guns or tools stays in that range, so the hose matches common low pressure setups. The fluid hose side with 750 psi working pressure supports higher pressures typical in fluid sections of spray systems, allowing the same assembly to handle both sides within their ratings. Temperature ranges of -20 to +190 degrees F for the air hose and 0 to 190 degrees F for the fluid hose give clear environments where the hose materials are intended to operate, helping installers match the hose to the conditions around the booth or workstation. Smooth synthetic rubber casings on both hoses help with pulling, hanging, or routing the assembly around fixed equipment.
This C.A. Technologies air hose assembly with 5 ft length fits spray equipment layouts that need a short connection between a spray gun, pump, or regulator and a main line or manifold. The 1/4 inch air hose construction suits low pressure air delivery where 200 psi working pressure is sufficient, which matches many spray gun air feeds. Textile reinforcement in the air hose helps it handle movement and flexing around the operator position or machine frame without losing form. On the fluid side, the nylon 11 tube and braided high strength synthetic yarn give structure suitable for up to 750 psi working pressure, so the assembly can sit close to pumps or proportioners in that range. The temperature ranges for both air and fluid hoses align with typical indoor spray areas, so the assembly works in standard finishing rooms and production lines where temperatures stay within the specified limits.
The -20 to +190 degrees F temperature range on the air hose supports consistent flexibility over a wide span of indoor conditions, so the line continues to behave predictably during day-to-day spraying. The 0 to 190 degrees F fluid hose temperature range keeps the nylon 11 tube within its intended operating window, which supports stable material flow for coatings or other fluids. Oil resistant smooth synthetic rubber casings on both air and fluid hoses limit surface effects from contact with lubricants and overspray, so the outer layers stay usable longer in busy spray areas. The silicone-free nylon 11 fluid tube construction supports systems that require silicone-free material paths, which matters in finishing operations sensitive to contamination. The 5 ft overall length lets installers place this assembly where a compact, controlled hose run improves handling, such as near a gun connection point or at a panel where both air and fluid join the equipment. The defined working pressures of 200 psi for air and 750 psi for fluid let planners map the assembly into air and fluid circuits with clear limits, which supports consistent setup and repeatable performance over time.
The 1/4 inch air hose assembly designation describes the hose size for the air section, which helps match this 5 ft C.A. Technologies hose to low pressure spray air connections.
The 200 psi working pressure on the air hose sets its operating limit, so it fits spray gun and equipment air supplies that work within low pressure ranges up to that level.
The 750 psi working pressure on the fluid hose reflects its braided high strength construction, so it can handle the higher pressures often used on fluid lines in spray systems.
The nylon 11 silicone-free tube provides a defined, silicone-free fluid path, which supports spray processes and coating systems that specify silicone-free material handling.
The air hose -20 to +190 degrees F and fluid hose 0 to 190 degrees F ranges align with typical indoor spray environments, so the hoses operate within their intended conditions.
The smooth synthetic rubber casings on both hoses provide a uniform, oil resistant exterior, which helps the assembly move over surfaces and handle contact in spray areas.
The C.A. Technologies low pressure air and fluid hose assembly in a 5 ft length offers clearly stated temperature ranges, working pressures, and materials for both air and fluid sections. Textile reinforced air hose with a smooth red synthetic rubber casing supports low pressure spray air delivery, while the nylon 11 silicone-free fluid tube with braided high strength synthetic yarn handles fluid pressures up to 750 psi. Oil resistant smooth synthetic rubber casings on both hoses suit spray environments where contact with oils and overspray is common. For spray equipment layouts that need a compact, specified air and fluid connection, this 1/4 inch air hose assembly 5 ft provides the defined characteristics needed for planning a consistent setup.