Drawer slide spacer 3/8 black 3605BK-22

Drawer Slide Spacer 3/8 Black For Face Frames

Drawer slide spacer 3/8 black sets the drawer slide off the cabinet side so drawer slides clear face frames in cabinet installations. The 3/8 inch depth spacer establishes a consistent setback, so drawer slides line up across multiple openings. The black color helps the spacer blend with dark cabinet interiors, keeping the hardware visually quiet after installation. As a drawer slide accessory from Bainbridge Manufacturing, this spacer supports standard drawer slide layouts without changing your construction methods. The spacer works with any drawer slides, so one part number covers different slide models across a job. Using a dedicated drawer slide spacer simplifies planning when cabinets mix face-frame and non-face-frame sections in one run. The Bainbridge Manufacturing 3605BK-22 part designation gives you a repeatable reference when reordering for future work.

Key Drawer Slide Spacer Details For Installers

• The spacer is for use with any drawer slides, so one component supports different slide types on a project and reduces sorting during installation.
• The 3/8 inch depth sets a fixed offset from the cabinet side, helping drawer slides clear face frames while keeping drawer box reveals consistent.
• The spacer is black, which visually matches dark interiors and helps the hardware recede from view after the drawer is installed.
• The part is identified as Bainbridge Manufacturing 3605BK-22, providing a specific reference when matching existing installations or setting project standards.
• The spacer belongs to the drawer slides accessories category, so it is designed to work in the same hardware stack as typical cabinet drawer slides.

Cabinet Mounting Details For Drawer Slide Spacer

This drawer slide spacer has two cabinet mounting holes spaced 1-1/4 inches apart, giving a predictable pattern along the cabinet side. The fixed spacing allows consistent screw placement from cabinet to cabinet, which speeds layout when installing multiple drawers in a run. A center Euro screw location mounts the drawer slide to the spacer, tying the slide directly to the spacer body. This centered Euro screw interface keeps the slide aligned with the spacer depth, which supports accurate drawer travel relative to the cabinet face frame. Because the cabinet holes and Euro screw point are built into one piece, the spacer helps tie the slide and cabinet side together in a repeatable way.

How This 3/8 Drawer Slide Spacer Works In Practice

Drawer Slide Spacer For Face-Frame Cabinet Runs

The 3/8 inch depth of this drawer slide spacer sets the slide away from the cabinet side so drawer slides clear face frames on cabinet boxes. In face-frame cabinets, this offset is critical to keep the slide rails aligned with the opening instead of buried behind the frame. By specifying a spacer that is for use with any drawer slides, installers can carry one 3/8 inch spacer for different slide models and stay within the same mounting approach. The black color helps the spacer disappear in darker casework interiors, so the focus stays on the drawer front rather than on the hardware. With two cabinet mounting holes spaced 1-1/4 inches apart, the spacer lets you repeat the same drilling pattern along a bank of drawers for consistent alignment. The part positioning within the drawer slides accessories class confirms its role as a support component in standard drawer slide assemblies.

Mounting Details That Support Repeatable Alignments

The cabinet mounting holes spaced 1-1/4 inches apart give this spacer a clear reference for drilling jigs and layout marks, which streamlines repetitive cabinet side preparation. That spacing becomes a predictable grid, helping keep drawer slides parallel from top to bottom in tall cabinets. A single center Euro screw location secures the drawer slide to the spacer, so the slide fastens directly at the spacer depth rather than relying solely on cabinet-side screws. This direct connection supports smoother slide function because the hardware is anchored at the same offset every time. The 3/8 inch depth dimension then works together with the Euro screw position to hold the slide rail square to the opening. Identifying the piece by manufacturer part 3605BK-22 gives shops a precise specification to list on cut sheets and job documents. The ability to use this spacer with any drawer slides lets installers standardize their mounting pattern across different slide lines while maintaining the same cabinet drilling and alignment strategy.

Common Questions About 3605BK-22 Drawer Spacer Use

Selecting This Spacer For Face-Frame Drawer Work

This Bainbridge Manufacturing drawer slide spacer, part 3605BK-22, provides a 3/8 inch depth to clear face frames while keeping drawer slides aligned with cabinet openings. The for use with any drawer slides design lets one spacer handle varied slide selections on a job. Two cabinet mounting holes spaced 1-1/4 inches apart and a center Euro screw connection give a clear, repeatable mounting pattern. The black finish coordinates with dark casework interiors. For face-frame cabinet runs needing a consistent drawer slide offset, this spacer offers a defined 3/8 inch setback and standardized mounting layout.