Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 3/8 inch thick screw-on nylon spacer from Bainbridge Manufacturing, boxed 50 per box, designed to offset drawer slides from the cabinet wall and bring the drawer front into correct alignment with the face frame or adjacent panels.
Drawer slides mount flush to a flat cabinet side in a frameless box. In face-frame construction, or anywhere the slide's ideal mounting plane sits away from the actual panel surface, a spacer bridges that gap precisely. A 3/8 inch spacer is a common correction depth for face-frame cabinets where the slide needs to sit proud of the stile or where a finished panel adds material on one side of the opening. It also handles situations where a partition wall is thinner than the neighboring panel, or where a recycled or repurposed cabinet box needs a slide brought forward to match an existing drawer front reveal. Reaching for a cut strip of plywood or a folded card works once; a dimensionally consistent nylon spacer works every time and every drawer comes out the same.
Nylon polyamide holds its shape under the compression load of a fastened slide and does not creep over time the way softer plastics can. The white color is molded through the material rather than a surface coat, so a fastener driven through the spacer does not expose a contrasting color at the hole. White is the right call when the cabinet interior is white melamine or the installed slides carry a white epoxy finish — the spacer disappears rather than drawing the eye.
Cabinet shops running face-frame production keep a box on the shelf as a standard consumable, pulling spacers whenever a slide position calls for a 3/8 inch offset. Contractors retrofitting slides into existing casework reach for them when panel thickness or a stile projection puts the slide at the wrong depth. Designers and homeowners tackling a kitchen renovation will find the boxed quantity practical for a full set of base cabinets without over-ordering. If your gap is smaller or larger than 3/8 inch, other thicknesses in this Bainbridge line cover the range.
Nylon polyamide resists light moisture and common household cleaners without staining or swelling, making it a practical choice for kitchen and bath cabinetry where the interior sees more humidity than a typical closet or office drawer.
Yes. Spacers are individual pieces, so you can use them on one side, both sides, or at different points along the slide's mounting surface as the installation requires. Use the same quantity on each slide if you need the drawer to sit level.
The spacer is screw-on — fasteners pass through it and into the cabinet panel. Make sure your screw length accounts for the 3/8 inch spacer thickness so the fastener reaches the panel with enough grip.
The dimensions and nylon construction are the same across colors in this Bainbridge series. The finish is the only difference, so choose the color that matches your cabinet interior or installed slide finish.
A molded nylon spacer at a precise 3/8 inch does what improvised shimming cannot: it gives every drawer in the run the same offset, so the reveal is consistent from top to bottom without re-measuring each one.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 50 Each |  PL3605AL Mfr# 3605AL-22 | Bainbridge 50-Pack Spacers, Almond, 3605AL-22 | ||||
Sold in: 50 Each |  PL3605BK Mfr# 3605BK-22 | Bainbridge 50-Pack Spacers, Black, 3605BK-22 |