Drawer Slide Spacers For Face Frame Clearance

Drawer slide spacers from Bainbridge Manufacturing provide a 1-1/2 inch depth between the cabinet side and the drawer slide, which creates the offset needed when working past face frames on cabinet boxes. These rectangular, heavy-duty nylon brackets support drawer slide positioning so slides can be mounted in a straight line relative to the drawer, even when the cabinet front projects forward. The white color helps these spacers blend with common light cabinet interiors, which keeps the installation looking clean in finished work. With a consistent 1-1/2 inch depth, each spacer sets the slide at the same distance along a run of drawers, which helps maintain alignment from top to bottom. The design focuses on supporting any drawer slides, so a shop can use these spacers across multiple slide lines while keeping the same mounting approach.

Key Spacer Details That Support Installers

• The spacer depth is 1-1/2 inches, which shifts the drawer slide out from the cabinet side far enough to clear face frames and still hold the slide square to the opening.
• These brackets are rectangular, so their flat faces sit flush to cabinet sides and slide members, helping maintain consistent spacing along the length of the slide.
• The spacers are made from heavy-duty nylon, which provides a rigid body for supporting drawer slides while resisting chipping during handling and installation.
• The white color matches common light cabinet interiors, which helps the spacer visually disappear behind slides and drawers once the job is complete.
• Spacers are described for use with any drawer slides, allowing one spacer style to serve multiple slide models in the same project layout.
• Each spacer is part of a drawer slide accessory line, so it integrates into standard slide mounting workflows used in cabinet and drawer construction.

Cabinet Mounting Layout And Slide Positioning

Each spacer has two cabinet mounting holes spaced 32 mm apart, so it fits cabinet layouts that follow the 32 mm system and supports repeatable vertical positioning. The two-hole pattern lets installers fasten the spacer to the cabinet in line with existing system rows, which keeps mounting consistent from cabinet to cabinet. A center Euro screw connection is provided to mount the drawer slide to the spacer, giving a direct attachment point between slide and bracket rather than relying on improvised fastening. This Euro screw location keeps the slide centered on the spacer, which supports an even bearing surface and consistent engagement along the slide length. Together, the 32 mm cabinet mounting and the center Euro screw connection support an organized, system-based setup on shop-built or modular casework.

Using Drawer Slide Spacers In Cabinet Work

Where These 1-1/2 Inch Spacers Are Applied

These drawer slide spacers from Bainbridge Manufacturing are used wherever drawer slides must bridge the gap created by cabinet face frames while staying aligned with the drawer box. The 1-1/2 inch depth moves the slide out to meet the face frame plane, so installers can mount the slide where the drawer needs to run. Because they are rectangular heavy-duty nylon brackets, they sit securely between cabinet side and slide, supporting the slide body without changing its geometry. The white color suits light-toned cabinet interiors often found in residential and commercial casework, which keeps the focus on the drawer fronts rather than the hardware behind them. As part of a drawer slide accessory range, these spacers fit into jobs where standard slides are already specified and only stand-off distance is needed.

Why These Spacer Details Improve Repeatable Mounting

The 32 mm spacing of the two cabinet mounting holes ties the spacer into a familiar cabinet drilling pattern, which helps installers place multiple spacers at matching heights across a bank of drawers. By fastening through those 32 mm-spaced holes, the spacer locks into the same vertical grid used for other cabinet hardware, so drawer slide positions stay consistent from unit to unit. The center Euro screw used to mount the drawer slide to the spacer creates a defined connection point, which keeps the slide centered on the bracket instead of drifting during fastening. This connection supports repeatable side-to-side positioning, which matters when aligning slides for smooth drawer travel. Because the spacer is specified for use with any drawer slides, shops can standardize on this part while still selecting different slide types, letting them keep a consistent mounting routine across various projects without changing the spacer layout or screw interface.

Common Questions About Bainbridge Drawer Slide Spacers

Selecting This Spacer For Face Frame Jobs

The Bainbridge Manufacturing 3675WH-42 drawer slide spacer provides a 1-1/2 inch stand-off, a 32 mm cabinet hole pattern, and a center Euro screw slide connection, so it supports system-based drawer slide mounting around face frames. For cabinet or drawer projects that use light interiors and standard drawer slides, this rectangular heavy-duty nylon spacer offers a defined way to position slides where the drawer needs to run. Choose this white drawer slide spacer when a consistent offset and familiar 32 mm layout are important for keeping drawer installations aligned across a run of cabinets.