Drawer Slide Spacers Heavy-Duty Nylon Brackets Use

Drawer slide spacers heavy-duty nylon brackets from Bainbridge Manufacturing are rectangular 1-1/2 inch spacers in an almond color that position drawer slides so they clear face frames, which helps align slides where a cabinet face projects past the cabinet side. These spacers are for use with any drawer slides, so one style can serve standard side-mount runs across a shop. The 1-1/2 inch depth creates a consistent setback from the cabinet side, which supports repeatable layout when building or modifying cabinets with face frames. The heavy-duty nylon construction provides a stable mounting platform between the drawer slide and cabinet side, so the slide sits flat against a uniform surface instead of irregular material. The almond color gives a neutral look that can blend with light cabinet interiors, which matters when slides are visible in open cabinets or shop-built casework.

Key Spacer Details That Support Cabinet Work

• The spacers are for use with any drawer slides, which means the same part can be used across different slide lines in a project, saving layout time when switching between brands or load ratings.
• The rectangular 1-1/2 inch depth establishes a fixed offset between the cabinet wall and drawer slide, so installers can work to one known dimension when clearing face frames and aligning drawer boxes.
• The spacers are available in almond color, giving a light, neutral tone that coordinates well with many cabinet interiors and helps the hardware visually recede in typical residential or commercial cabinetry.
• Heavy-duty nylon construction forms a rigid interface between slide and cabinet, which supports consistent slide positioning and helps maintain smooth drawer travel when cabinets see everyday use.
• Two cabinet mounting holes spaced 32 mm apart fit a 32 mm system layout, which aligns with common cabinet drilling patterns and helps streamline production or field retrofits.
• One center Euro screw hole to mount the drawer slide to the spacer locates the slide consistently on the spacer, which simplifies installation when repeating the same setup across multiple drawers.

Drawer Slide Spacer Mounting And Alignment Details

These Bainbridge drawer slide spacers use two cabinet mounting holes spaced 32 mm apart, which ties directly into standard 32 mm cabinet drilling systems and keeps hole locations predictable. The cabinet holes hold the spacer to the cabinet side, then one center Euro screw hole mounts the drawer slide to the spacer, so the slide location is indexed off the spacer rather than the cabinet material. With the rectangular 1-1/2 inch depth, the spacer moves the slide out far enough to clear face frames, which helps keep the drawer box centered in the opening when working with framed cabinetry. The almond color and nylon body keep the part easy to spot during layout and installation, while still sitting discreetly behind the slide once the drawer is installed.

Using This Bainbridge Spacer In Cabinet Projects

Where This 1-1/2 Inch Spacer Works Best

This Bainbridge Manufacturing rectangular 1-1/2 inch almond spacer is designed for use with any drawer slides where face frames need to be cleared. In framed cabinets, the frame can stand proud of the cabinet side, so the spacer fills that offset and brings the slide out to meet the frame plane. The heavy-duty nylon body forms a solid bridge between the cabinet side and slide, which is useful when cabinet material is uneven or when there are gaps behind the frame. Two cabinet mounting holes spaced 32 mm apart allow this spacer to sit naturally in cabinets built around the 32 mm system, so it fits neatly into line-bored interiors. When used in production shops or larger jobs, that consistent hole spacing supports faster repeat setups across many cabinet boxes.

Why The Spacer Design Supports Repeatable Results

The combination of a rectangular 1-1/2 inch depth and a dedicated center Euro screw hole for the drawer slide gives this spacer a straightforward, repeatable mounting sequence. First, the 32 mm-spaced cabinet mounting holes position the spacer in a known pattern, so every spacer in a run lands at the same vertical and horizontal reference. Next, the center Euro screw hole anchors the drawer slide to the spacer in a fixed relationship, which keeps slide setback and height consistent from cabinet to cabinet. Because the spacer is for use with any drawer slides, it allows installers to keep the same basic mounting geometry even when different slide models are specified. The almond color and heavy-duty nylon construction support clear visibility during installation and a stable interface that helps drawers track consistently once the project is in service.

Common Questions About This Drawer Slide Spacer

Select This Spacer For Face Frame Slide Runs

This Bainbridge Manufacturing drawer slide spacer combines a 1-1/2 inch depth, almond color, and heavy-duty nylon construction with 32 mm-spaced cabinet mounting holes and a center Euro screw hole for the slide. That mix creates a predictable way to offset any drawer slides to clear face frames while keeping layouts tied to a standard drilling system. For cabinet shops and serious installers working regularly with framed cabinetry, this spacer offers a straightforward method to position slides consistently across multiple boxes and projects.