Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 1/2 inch nylon drawer slide spacer in Almond, designed to offset the cabinet or drawer member where a standard mounting position falls short — letting the slide sit flush, plumb, and at the right depth inside the cabinet. Sold 50 per box.
Face-frame cabinets are the most common home for a spacer like this. When the cabinet side is recessed behind the face frame, a slide mounted directly to the side sits too far back or at an angle — and the drawer front gaps, tilts, or binds. A 1/2 inch spacer brings the slide out to the correct plane without shimming with scrap wood or adding a filler strip. It also helps on frameless cabinets where a back wall, pipe chase, or out-of-square box creates a gap that the slide's standard mounting holes cannot bridge. Cabinet shops running almond-finish slide programs use these to maintain a consistent look at every mounting point across a kitchen or bath run.
Nylon holds up where wood shims fail: it does not compress, split, or absorb moisture behind a sink cabinet or in a humid utility space. The Almond color is matched to complement almond epoxy-coated Euro slides and similar hardware in that finish family, so the spacer is inconspicuous in the installed cabinet. For white or black slide programs, this catalog carries matching spacers in those finishes.
Cabinet installers reach for spacers when the field reveals a gap the shop drawings did not anticipate — an out-of-plumb wall, a deeper-than-expected face frame, or a cabinet that arrived slightly racked. Having a box of 50 on the truck means the slide goes in correctly the first time rather than waiting on a second trip for filler material. Production shops building face-frame lines in almond also pre-kit these alongside their slide orders so assembly never stalls at the spacer step.
Physically yes, but a stacked pair should be fastened securely through both pieces so neither can shift under the slide. For a consistent 1-inch offset, the 1-inch drawer slide spacer in this catalog is a cleaner single-piece solution.
The spacer is not brand-specific — it sits between the cabinet surface and the slide's mounting flange and is held by the same screws that mount the slide. It works wherever a 1/2 inch offset is needed and the slide uses screw-on mounting.
The spacer transfers load through its full face, not through the fastener alone. Nylon polyamide has the compressive strength to handle standard drawer slide loads in residential and light commercial cabinetry without deforming.
That depends on the number of mounting points that need offsetting. Some installations need one spacer per screw location on each slide; others correct only the front or rear mounting point. Measure the gap at each mounting location and order accordingly.
A properly spaced slide runs true from day one — no binding, no tilted front, no call-back. Keep a box of these Almond spacers in the kit and the install goes in right the first time.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  PL3600WH Mfr# 3600WH-52 | Bainbridge Spacers, White, 3600WH-52 |