Drawer Slide Spacers Heavy-Duty Nylon, Rectangular, 3/4" Thick from Bainbridge Manufacturing provide a consistent 3/4" depth, which spaces drawer slide hardware off the cabinet wall to a fixed dimension that supports repeatable layouts across a run of cabinets. The white spacer body keeps the part visible against darker materials, which helps during layout and installation in shop or onsite conditions. The rectangular shape presents straight edges along the length, so the spacer sits flush against cabinet sides or supporting structure for stable positioning. Made as heavy-duty nylon spacers, the material resists typical handling in a woodworking environment, which helps maintain the 3/4" thickness over time for dependable use on multiple jobs. These spacers are sold in full and broken box quantities through Wurth Baer Supply, allowing purchasing in job-sized lots that match project volume on small service work or larger cabinet builds.
This Bainbridge drawer slide spacer provides a 3/4" depth, so the working face of the spacer defines the offset for slide hardware from the mounting surface. The 1/4" holes are set 32 mm apart, matching a 32 mm pattern layout, which helps align the spacer consistently along cabinet sides that use a 32 mm system. By combining the fixed 3/4" depth with the 32 mm spacing of the 1/4" holes, installers can position slides at repeatable locations while still using their preferred fasteners through those holes. This lets the spacer act as both a depth gauge and a reference along the cabinet height, supporting efficient drawer slide positioning in system-built cabinets or similar casework.
This white rectangular spacer fits drawer slide work where a 3/4" depth is needed between the cabinet side and the slide. In cabinet shops using 32 mm system layouts, the 1/4" holes spaced 32 mm apart allow the spacer to line up with existing row patterns, so the spacer can sit in predictable positions along cabinet sides or partitions. In service or retrofit work, the same 3/4" thick spacer can help match the slide setback of existing drawers when adding or replacing slides, since the fixed depth restores that offset in the new installation. Because the spacer body is heavy-duty nylon, it handles normal cabinet shop conditions while maintaining its rectangular form, so it can continue to provide a flat bearing surface against cabinet material on repeated projects. The white finish keeps it easy to see inside cabinet interiors, which supports quick orientation and positioning during installation work.
The 3/4" thick design gives a single, reliable reference dimension that determines slide setback, so installers can position hardware without recalculating offsets for each cabinet, which reduces layout variation between openings. The 1/4" holes on 32 mm centers tie into a standard drilling pattern, allowing the spacer to be located along pre-drilled rows wherever that pattern is present in the cabinet, which supports consistent vertical positioning of slides. The rectangular profile means all working faces are straight, so when the spacer is placed against a straight cabinet side it helps keep the slide parallel to the cabinet edge over its full length. Heavy-duty nylon construction keeps the spacer stable under typical clamping or hand pressure, which helps the 3/4" depth remain accurate when used as a physical gauge. Sold under manufacturer part number 3682WH-52, the spacer can be specified reliably on drawings or purchase lists, which supports consistent ordering for repeated cabinet programs using the same slide spacing.
The spacer provides a fixed 3/4" depth between the mounting surface and drawer slide hardware, which sets a consistent setback so drawer slides line up uniformly across cabinets.
The 1/4" holes at 32 mm spacing align with 32 mm system layouts, so the spacer can register along pre-drilled rows, supporting repeatable slide positioning in casework using that pattern.
The rectangular shape sits flush against cabinet sides, so it is useful wherever drawer slides need a straight reference edge and a 3/4" offset for consistent drawer operation.
The spacer is white, which keeps it visible inside typical cabinet interiors, helping installers see its position clearly when aligning drawer slides during mounting work.
Part number 3682WH-52 identifies this specific Bainbridge Manufacturing spacer, which helps purchasers request the same 3/4" white rectangular nylon spacer for ongoing projects.
The heavy-duty nylon body withstands normal handling in cabinet shops, helping the spacer maintain its 3/4" thickness so it can be reused wherever the same offset is required.
The Bainbridge Drawer Slide Spacers Heavy-Duty Nylon, Rectangular, 3/4" Thick provide a defined 3/4" depth with 1/4" holes spaced 32 mm apart, which supports consistent drawer slide placement in cabinets built around that offset. For projects that rely on repeated slide spacing and predictable alignment, the white rectangular heavy-duty nylon body and identifiable 3682WH-52 part number give installers and buyers a specific spacer that matches those layout needs. Order from Wurth Baer Supply in the full or broken box quantities offered to align your spacer stock with the volume of drawer work in your current and upcoming cabinet jobs.
Sold In: 1 Each