Berenson Advantage Plus Five Series 3" (76 mm) Center to Center Verona Bronze Cup Pull, - 9386-10VB-P

Berenson Advantage Plus Five Cup Pull For Cabinets

Berenson Advantage Plus Five cup pull gives you a defined 3 inch center to center grip, so hole boring stays straightforward and repeatable on cabinet doors and drawers. The zinc die cast material provides a solid metal pull body, which supports consistent feel when you open and close fronts throughout a run of cabinetry. The Verona Bronze finish establishes a specific warm, dark tone, helping you match or coordinate with other Verona Bronze hardware from the same space. The 3-1/2 inch overall length keeps the pull compact on narrower drawer fronts, which helps maintain balanced proportions on smaller faces. A 1 inch projection sets the pull away from the surface at a predictable distance, giving fingers clearance while keeping the profile tight to the cabinet. The 1-11/16 inch width defines the visible cup height, which matters when aligning multiple pulls in a straight visual line.

Key Cup Pull Details For Daily Cabinet Use

• The 3 inch center to center dimension establishes a common drilling layout, so installers can use standard templates and jigs for faster, consistent installation across multiple fronts.
• The zinc die cast construction creates a single-piece metal pull body, which supports everyday opening and closing without flexing across a typical cabinet installation.
• The Verona Bronze finish sets a specific color and sheen, helping designers and installers tie this pull into Verona Bronze hinges or other visible hardware in the same project.
• The 3-1/2 inch length defines the footprint on the drawer or door, allowing accurate positioning on narrower rails while still giving room for a full hand grip.
• The 1 inch projection holds the grip off the surface at a controlled distance, so fingers catch the pull easily while keeping the profile close for a cleaner cabinet face.
• The 1-11/16 inch width establishes the cup height, which helps layout when you want even sight lines between adjacent pulls along a bank of drawers.

Installation Dimensions For Accurate Cup Pull Layout

The 3 inch center to center spacing is the primary installation dimension, setting the distance between mounting holes for this cup pull on cabinet doors or drawers. That fixed spacing fits well with common drilling jigs, so rows of pulls line up evenly across multiple fronts. With a 3-1/2 inch overall length, the pull sits slightly wider than the hole pattern, which leaves material at each end for visual balance on the rail. The 1 inch projection defines how far the pull stands off the cabinet surface, which guides installers when checking clearances near adjacent doors, trim, or countertop edges. The 1-11/16 inch width describes the vertical height of the cup, which is useful when centering the pull between stile or drawer edges for consistent reveal.

Using This Verona Bronze Cup Pull In Projects

Where This Berenson Cup Pull Fits Best

This Berenson Advantage Plus Five cup pull is designed for cabinet applications where a 3 inch center to center layout is already planned or preferred, so it works smoothly in both new cabinets and updates that follow this common standard. The Verona Bronze finish aligns with projects calling for a dark, warm-toned metal pull, which is useful in kitchens, baths, and built-ins specd around Verona Bronze decorative hardware. The 3-1/2 inch length keeps the pull sized for typical residential cabinet drawers and doors, so it sits comfortably on mid-size and smaller fronts without overpowering narrow rails. With a 1-11/16 inch width, the cup shape presents a noticeable but contained profile, which suits banks of drawers where multiple pulls need to sit close without visually crowding each other.

Details That Support Consistent Cabinet Hardware Results

The defined 3 inch center to center spacing supports straightforward drilling with standard cabinet hardware jigs, helping maintain straight lines of pulls across doors and drawers. Zinc die cast construction gives the pull a uniform casting, which helps each piece match in shape when you install a full room of hardware. The Verona Bronze finish is specified by name, which assists in keeping finish selection consistent when pairing this pull with Verona Bronze parts from the same project. A 1 inch projection sets a predictable stand-off from the cabinet face, so hand clearance and shadow lines remain consistent from one front to the next. The 3-1/2 inch length and 1-11/16 inch width work together to define the visible cup area, which helps designers and installers visualize spacing between neighboring pulls, appliances, and trim details.

Common Questions About This Berenson Cup Pull

Selecting This Cup Pull For Verona Bronze Runs

The Berenson Advantage Plus Five cup pull in Verona Bronze combines a 3 inch center to center layout with defined length, width, and projection, so cabinet runs share the same proportions from front to front. The zinc die cast construction and specified Verona Bronze finish align with projects that call for metal pulls in this exact tone. For cabinet hardware layouts built around a 3 inch center to center standard, this 9386-10VB-P cup pull offers consistent dimensions installers can repeat across the job.